MSDS NAME:AS1116 PART B
NIIN:00N001401
MSDS Number: BCHSR
=== Responsible Party ===
Company:DEXTER CORP THE DEXTER ELECTRONIC MATERIAL DIV.
Address:211 FRANKLIN ST.
City:OLEAN
State:NY
ZIP:14760-1297
Country:US
Info Phone Num:716-372-6300
Emergency Phone Num:716-372-6309
CAGE:04347
=== Contractor Identification ===
Company:DEXTER CORP THE DEXTER ELECTRONIC MATERIAL DIV
Address:211 FRANKLIN ST.
Box:City:OLEAN
State:NY
ZIP:14760-1297
Country:US
Phone:716-372-6300/6309
CAGE:04347
============= Composition/Information on Ingredients =============
Effects of Overexposure:CONTACT WITH SKIN OR EYES MAY CAUSE BURNS.
BREATHING VAPORS MAY BE SLIGHTLY IRRITATING. SEE SUP DATA
======================= First Aid Measures =======================
First Aid:FLUSH SKIN AND EYE CONTACT WITH CLEAN WATER. GET MEDICAL CARE
FOR EYES. REMOVE CONTAMINATED CLOTHING. IF INHALED REMOVE TO FRESH
AIR. THIS MATERIAL IS A SENSITIZER.IF ALLERGIC MANIFESTATIONS
OCCUR, CO NSULT A PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point:420F,216C COC
Extinguishing Media:CO*2, DRY CHEMICAL, CHEMICAL FOAM.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Respiratory Protection:AIR SUPPLIED RESPIRATOR OR CHEMICAL CARTRIDGE
RESPIRATOR.
Ventilation:LOCAL EXHAUST:DESIRED. MECHANICAL: ACCEPTABLE.
Protective Gloves:IMPERVIOUS
Eye Protection:FACE SHIELD
Other Protective Equipment:IMPERVIOUS APRON.
Supplemental Safety and Health
VAPOR PRESSURE: <0.01MM/HG. EFFECTS OF OVEREXPOSURE: PROLONGED SKIN
CONTACT MAY CAUSE DERMATITIS.
HCC:N1
Boiling Pt:B.P. Text:>500F,>260C
Spec Gravity:1.3000
Solubility in Water:PARTIAL
Appearance and Odor:WHITE, HIGH VISCOSITY PASTE,MILD AMMONICAL ODOR.
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH ACIDS.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
NITROGEN OXIDES,CO,OR CO*2
Waste Disposal Methods:REMOVE TO LANDFILL OR INCINERATE IN A FURNACE IF
LOCAL REGULATIONS PERMIT. NEW YORK STATE DOES NOT PERMIT LANDFILL
BURIAL OF LIQUIDS. SOLIDIFY BY MIXING WITH EPOXY RESIN BEFORE
BURIAL. THIS IS NOT A H AZARDOUS WASTE UNDER THE RCRA.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.