===================== Product Identification =====================
MSDS NAME:GELL CELL/DYNASTY/GELLED OR ABSORBED ELECTR
NIIN:01-117-6545
MSDS Number: BNWCF
=== Responsible Party ===
Company:JOHNSON CONTROLS INC GLOBE BATTERY DIV
Address:5757 N GREEN BAY AVE
Box:591
City:MILWAUKEE
State:WI
ZIP:53201
Country:US
Info Phone Num:414-228-2746
Emergency Phone Num:414-228-2746(800-424-9300 CHEMTREC)
CAGE:25244
=== Contractor Identification ===
Company:ARJAY ELECTRONICS CORP
Address:525 W CHESTER PIKE SUITE 314
Box:City:HAVERTOWN
State:PA
ZIP:19083-4539
Country:US
Phone:215-449-3600
CAGE:64812
Company:JOHNSON CONTROLS INC GLOBE BATTERY DIV
Address:5757 N GREEN BAY AVE
Box:591
City:MILWAUKEE
State:WI
ZIP:53201
Country:US
Phone:800-365-7777
CAGE:25244
============= Composition/Information on Ingredients =============
Name:LEAD (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:LEAD PEROXIDE
CAS:1309-60-0
RTECS #:OG0700000
Other REC Limits:NONE RECOMMENDED
Name:LEAD SULFATE (SARA III)
CAS:7446-14-2
RTECS #:OG4375000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:SEE 1910.1025
ACGIH TLV:0.15 MG PB/M3; 9192
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
Name:SULFURIC ACID (SARA III) (AS ABSORBED/GELLED ELECTROLYTE)
CAS:7664-93-9
RTECS #:WS5600000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50 (ORAL RAT) IS 2140 MG/KG (H2SO4)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE IRRITATION OF
RESPIRATORY TRACT, EYES, SKIN OR GI TRACT. MAY CAUSE BURNS OF SKIN,
EYES, OR GI TRACT. MAY CAUSE CORNEAL DAMAGE OR BLINDNESS. CHRONIC:
TOOTH EROSION, INFLAMMATION OF NOS E, THROAT AND BRONCHIAL TUBES.
Explanation of Carcinogenicity:THE ELECTROLYTE AND LEAD ARE NOT LISTED
BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:INHALATION: BURNING SENSATION IN NOSE, THROAT
AND LUNGS, COUGHING, WHEEZING, SHORTNESS OF BREATH. EYES: REDNESS,
TEARING, BLURRED VISION, BURNS, SEVERE PAIN. SKIN: SEVERE PAIN,
BURNS, REDNESS, RASH, I TCHING. INGESTION: BURNS OF MOUTH, THROAT,
AND ESOPHAGUS, SEVERE STOMACH PAIN, NAUSEA, VOMITING.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF AILMENTS
OR WITH A PRE-EXISTING DISEASE INVOLVING THE RESPIRATORY TRACT OR
TEETH MAY BE AT INCREASED RISK FROM EXPOSURE.
======================= First Aid Measures =======================
First Aid:INHALATION:REMOVE TO FRESH AIR. RESUSCITATE IF NOT BREATHING.
GET MEDICAL ATTENTION. EYES:IMMEDIATELY FLUSH WITH PLENTY OF WATER
FOR 15 MINUTES HOLDING EYELIDS OPEN. GET PROMPT MEDICAL ATTENTION.
SKIN :REMOVE CONTAMINATED CLOTHING. WASH WITHPLENTY OF WATER FOR 15
MINUTES. GET MEDICAL ADVICE. INGESTION:DO NOT INDUCE VOMITING.
GIVE NOTHING BY MOUTH IF UNCONSCIOUS. GET IMMEDIATE MEDICAL
ATTENTION.
===================== Fire Fighting Measures =====================
Extinguishing Media:USE DRY CHEMICAL, CARBON DIOXIDE, OR FOAM.
Fire Fighting Procedures:WEAR SCBA AND FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:HYDROGEN AND OXYGEN GASES ARE PRODUCED
DRING OPERATION. THESE GASES PASS THROUGH THE VENT CAPS. KEEP
SPARKS AND SOURCES OF IGNITION AWAY FROM BATTERY.
================== Accidental Release Measures ==================
Spill Release Procedures:SHOULD A BATTERY BREAK OPEN, ISOLATE AREA.
ELECTROLYTE SHOULD BE ABSORBED WITH A NON-ORGANIC TYPE ABSORBENT
SUCH AS DRY SAND OR EARTH. AVOID DILUTION WITH WATER. LEAD SPILLED
FROM THE BATTERY SHOULD B E VACUUMED, DO NOT SWEEP OR USE
COMPRESSED AIR.
Neutralizing Agent:USE SODA ASH OR BAKING SODA TO NEUTRALIZE THE
ELECTROLYTE.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID THE USE OF UNINSULATED TOOLS. IF
THEY ARE REQUIRED, TAKE CARE NOT TO ELECTRICALLY SHORT THE
TERMINALS. REMOVE METAL JEWELRY BEFORE SERVICING.
Other Precautions:UNDER NORMAL CONDITIONS OF USE, EXPOSURE TO LEAD OR
LEAD CONTAINING COMPOUNDS DOES NOT OCCUR. SHOULD A BATTERY BREAK
OPEN AND A LEAD SPILL OCCUR, PRECAUTIONS SHOULD BE TAKEN TO PREVENT
LEAD DUST FROM BECOMING AIR BORNE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:UNDER NORMAL CONDITIONS OF USE, RESPIRATORY
PROTECTION IS NOT REQUIRED. HOWEVER, IF CONDITIONS ARISE THAT
REQUIRE THEIR USE, USE ONLY NIOSH/MSHA RESPIRATORS APPROVED FOR
DUST, FUME AND MIST.
Ventilation:BATTERY CHARGING AREAS MUST BE ADEQUATELY VENTILATED TO
PREVENT HAZARDOUS CONCENTRATIONS OF FLAMMABLE GAS OR ACID MIST.
Protective Gloves:RUBBER GLOVES APPROVED FOR SULFURIC ACID
Eye Protection:CHEMICAL SPLASH GOGGLES AND FACE SHIELD
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER.
INDUSTRIAL-TYPE IMPERVIOUS WORK CLOTHING, BOOTS AND APRON AS
REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
RQ FOR CERCLA AND SARA III IS 1000 LBS (ELECTROLYTE). MSDS WRITTEN FOR
ELECTROLYE- IT IS THE PRIMARY HAZARD DURING NORMAL USE AND
HANDLING.
================== Physical/Chemical Properties ==================
HCC:Z7
Appearance and Odor:AN OBJECT CONSISTING OF A TRANSPARENT TO OPAQUE
CASE AND SEALED COVER. ODORLESS
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
CONTACT OF ELECTROLYTE WITH ORGANIC MATERIAL AND COMBUSTIBLES, STRONG
ALKALIS, REDUCING AGENTS, STRONG OXIDIZING AGENTS
Stability Condition to Avoid:OVERCHARGING, SOURCES OF IGNITION
Hazardous Decomposition Products:SULFURIC ACID MIST, SULFUR DIOXIDE AND
CARBON MONOXIDE MAY BE RELEASED WHEN ELECTROLYTE DECOMPOSES.
==================== Disposal Considerations ====================
Waste Disposal Methods:BOTH ELECTROLYTE AND SCRAP BATTERIES ARE
REGULATED HAZARDOUS WASTE. SCRAP BATTERIES CONTAIN MATERIALS WHICH
ARE RECYCLABLE AND MUST BE RETURNED TO AUTHORIZED RECYCLER.
ELECTROLYTE SHOULD BE HAULED TO A PERMITTED TREATMENT FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
UXF/G 18895-WIDE RANGE D
| 67-56-1 |
|
WIDE RANGE PH INDICATOR SOLUTION
| 67-63-0
7732-18-5 |
|
GELL CELL/DYNASTY/GELLED OR ABSORBED ELECTR
| 7439-92-1
1309-60-0
7446-14-2
7664-93-9 |
|
URALITE 3139,POTTING COMPOUND,PART A
| 5124-30-1
112945-52-5
68310-52-1 |
|
URALITE 3139,POTTING COMPOUND,PART B
| 112945-52-5
101-77-9
13463-67-7
25214-70-4
69178-40-1
872-50-4
2481-94-9
85-83-6 |
|
K03B111AA-GT1
| 7440-02-0
7440-43-9
1310-58-3 |
|
GASKET
| 12001-29-5
7440-02-0 |
|
LEAD-ACID CELL (ANTIMONY), MODEL NO. 18-75C
| 7439-92-1
7440-36-0
1309-60-0
7664-93-9 |
|
IBM IT-34 TONER
| 25608-33-7
25119-62-4
70983-74-3
1333-86-4
68909-20-6 |
|
NICKEL CADMIUM STORAGE BATTERY
| 1310-58-3 |
|
8675B GASKET
| 12001-29-5 |
|
P/N 9151-45
| |
|
KWIK KOLD
| 7732-18-5
6484-52-2 |
|
DPD 1 TABLET, 08576 3002-83, 08576 3003-19,
| 10043-35-3 |
|
PROPYLENE
| 115-07-1
74-98-6 |
|
HEXAFLOC M-20,COAGULANT WATER (SEE SUPP DA)
| |
|
SODIUM HEXAMETAPHOSPHATE
| 68915-31-1 |
|
P/N P24 5 LEAD ACID BATTERIES
| 7664-93-9
1309-60-0
7439-92-1 |
|
HEXAFLOC M-20
| |
|
AIC HDM-11 GREASE
| |
|
CARBON DIOXIDE
| 124-38-9 |
|
P/N 4120-39, SAVIN 765 DISPERSANT
| 64742-48-9 |
|
AIR LUBE 10W/NE
| |
|
PROPANE
| 74-98-6
25635-88-5 |
|
NK 2528-1
| 12001-29-5 |
|
SILICA GEL
| 63231-67-4 |
|
LEAD ACID BATTERY
| 7664-93-9
7440-36-0
7440-38-2
7440-70-2
7440-31-5
9003-07-4
9003-53-6
9003-54-7
9003-56-9
9003-55-8
9002-86-2 |
|
EPK 1C PART A
| 14807-96-6
13463-67-7 |
|
EPK 1C PART B
| 14807-96-6
7631-86-9
111-40-0 |
|
AVCOAT 8039CCF,COMPONENT II, (SEE SUPP)
| 1338-23-4
7722-84-1
131-11-3
78-93-3 |
|
HT 424 THIXOTROPIC PASTE,PART B,ADHESIVE
| 7429-90-5
112945-52-5 |
|
GASKET
| 12001-29-5 |
|
MOLYBDENUM DISULFIDE LUBRICANT,MOLYDAG 210
| 1317-33-5
1330-20-7
67-63-0 |
|
P/N 72-00035 PART I,ADHESIVE
| 7440-02-0
127-18-4
108-88-3
9016-00-6
68988-56-7 |
|
GASKET P/N 107E4517-200
| 12001-29-5 |
|
AMPLI-FOAM
| 1310-73-2
7631-90-5
67-63-0 |
|
ANT-ICING AND D-ICING DEFROSTING FLUID
| 57-55-6 |
|
MANU-KLENZ
| 25155-30-0
68603-42-9 |
|
SCOTCH BRAND POLYURETHANE PROTECTIVE TAPE (
| 67-63-0
108-88-3
68989-76-4 |
|
T-180, 1,1,2-TRICHLORO-1,2,2-TRIFLUORETHANE
| 76-13-1 |
|
1142577 REFLOTRON CLEAN AND CHECK KIT
| 67-63-0 |
|
AIR LUBE 10W/NR,P/N-60538
| 64742-53-6 |
|
478192 CALIBRATION CHECK GAS
| 74-82-8
7782-44-7
7727-37-9 |
|
8755-39 RPR TEST KIT 115
| |
|
CERAMCO SHOULDER POWDER LIQUID
| 64-17-5
7732-18-5 |
|
PVC GRAPHITE TILE
| 75-01-4
108-05-4
7782-42-5 |
|
HIBICLENS
| 18472-51-0
67-63-0
7732-18-5 |
|
CERAMCO II PORCELAIN
| 68476-25-5 |
|
DE-SOLV-IT,CLEANER/SOLVENT
| 5989-27-5
8006-54-0 |
|
CERAMCO II PORCELAIN
| 68476-25-5 |
|
|