LD50 LC50 Mixture:LD50: 1.6 G/KG. LC50: 510 PPM.
Health Hazards Acute and Chronic:VAPOR OR SPRAY MIST CAN BE HARMFUL.
IRRITATING TO EYES, SKIN, NOSE & THROAT. EXCESSIVE INHALATION CAN
CAUSE HEADACHE, NAUSEA, OR DIZZINESS. REPEATED & PROLONGED
OCCUPATIONAL OVEREXPOSURE TO SOLVENT IS ASSOCIATED W/PERMANENT
BRAIN & NERVOUSSYSTEM DAMAGE. CAN BE HARMFUL IF SWALLOWED. CAN BE
HARMFUL IN INHALED. CAN BE *
Effects of Overexposure:* HARMFUL IF INHALED OR ABSORBED THROUGH THE
SKIN. OVEREXPOSURE CAN DAMAGE LUNGS, CENTRAL NERVOUS SYSTEM.
OVEREXPOSURE CAN CAUSE DELAYED LUNG INJURY.
Medical Cond Aggravated by Exposure:RESPIRATORY. SKIN.
======================= First Aid Measures =======================
First Aid:OVEREXPOSURE TO VAPOR/SPRAY MIST: PROVIDE FRESH AIR. IF
BREATHING LABORED, GIVE OXYGEN/ARTIFICIAL RESPIRATION. SKIN: WASH
THOROUGHLY W/SOAP & WATER. EYES: FLUSH IMMEDIATELY WITH PLENTY OF
WATER FOR AT LEAST 15 MINUTES. GET MEDICAL ATTENTION. SWALLOWED:
DRINK 1-2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE VOMITING.
CONSULT PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY. TREAT
SYMPTOMATICALLY.
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:95.0F,35.0C
Lower Limits:1.00
Upper Limits:8.00
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIPMENT, SELF-CONTAINED
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. KEEP FROM HEAT/IGNIT SOURCE. VAPOR MAY
SPREAD LONG DISTANCES CAUSE FLASH FIRE/IGNITE EXPLOSIVELY.
Spill Release Procedures:AVOID BREATHING OF VAPORS. USE ABSORBENT
CLEANUP MATERIALS. PLACE IN SEPARATE CONTAINER. KEEP OUT OF SEWERS
AND WATERWAYS. IF ENTRY IS THREATENED OR OCCURS, NOTIFY LOCAL
AUTHORITIES. ELIMINATE ALL SOU RCES OF IGNITION.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINER CLOSED, UPRIGHT WHEN
NOT IN USE. STORE IN COOL, DRY, WELL-VENTILATED AREA. AVOID STORAGE
TEMPERATURES ABOVE 100 F.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED BREATHING OF
VAPORS OR SPRAY MIST OR CONTACT WITH SKIN & EYES. DO NOT WELD OR
FLAME CUT ON EMPTY CONTAINER. GROUND CONTAINERS WHEN POURING.
Respiratory Protection:NIOSH/MSHA RESPIRATOR. FOR SPECIFIC CONDITIONS,
REFER TO NIOSH POCKET GUIDE TO CHEM HZDS. USE AIR-LINE RESPIRATORS
IN CONFINED OR RESTRICTED VENTILATION AREAS. REFER TO 29 CFR, OSHA
PARTS 1910 & 1915 FOR COATING OPERATIONS.
Ventilation:PROVIDE VENT TO KEEP AIR CONTAM CONC BELOW TLV. REMOVE
WELDING/FLAME CUT DECOMP PROD. SEE 29CFR 1910/1915 COATING OPERTN
Protective Gloves:NEOPRENE, OR OTHER SUITABLE IMPERVIOUS
Eye Protection:SPLASH PROOF GOGGLES OR FACE SHIELD
Other Protective Equipment:FULL PROTECTIVE CLOTHING. SPARK-PROOF
EQUIPMENT.
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING, SMOKING OR USING
WASHROOM. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
HCC:F3
Boiling Pt:B.P. Text:252 TO 300F
Vapor Density:> AIR
Spec Gravity:11.2 LBS/GAL
Evaporation Rate & Reference:LOW.12 HIGH 1 (BU AC=1)
Appearance and Odor:LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:40
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, ALKALIES.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC OR SPARKS.
Hazardous Decomposition Products:CO AND CO2
Waste Disposal Methods:IN SEPARATE, CLOSED METAL CONTAINER IN
ACCORDANCE WITH ALL APPLICABLE REGULATIONS. EPA WASTE NO: D001.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.