===================== Product Identification =====================
MSDS NAME:PDL 401 - "A" COMPONENT
NIIN:00K000535
MSDS Number: BPVMC
=== Responsible Party ===
Company:POLYMER DEVELOPMENT LABORATORIES INC
Address:212 W TAFT AVE
City:ORANGE
State:CA
ZIP:92665-4220
Country:US
Info Phone Num:714-921-2300
Emergency Phone Num:714-921-2300
CAGE:1N060
=== Contractor Identification ===
Company:POLYMER DEVELOPMENT LABORATORIES INC
Address:212 W TAFT AVE
Box:City:ORANGE
State:CA
ZIP:92665-4220
Country:US
Phone:714-921-2300
CAGE:1N060
============= Composition/Information on Ingredients =============
Name:PHENYL ISOCYANATE
CAS:103-71-9
RTECS #:DA3675000
Fraction by Wt: TRACE
Other REC Limits:NONE RECOMMENDED
Name:METHYLENE BISPHENYL ISOCYANATE (MDI) (SARA III)
CAS:101-68-8
RTECS #:NQ9350000
Fraction by Wt: 35-45%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:C, 0.02 PPM
ACGIH TLV:0.005 PPM; 9293
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:HIGHER OLIGOMERS OF MDI (POLYMETHYLENE POLYPHENYLENE
POLYISOCYANATE)
CAS:9016-87-9
RTECS #:TR0350000
Fraction by Wt: 35-45%
Other REC Limits:NONE RECOMMENDED
===================== Hazards Identification =====================
LD50 LC50 Mixture:TLV IS 0.00005 PPM TWA
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION-MAY CAUSE RESPIRATORY
SENSITIZATION IN SUSCEPTIBLE INDIVIDUALS AT ROOM TEMPERATURE.
SKIN-MAY CAUSE ALLERGIC SKIN REACTION IN SUSCEPTIBLE INDIVIDUALS.
PROLONGED OR REPEATED CONTACT MAY CAUSE SKIN IRRITATION.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:SKIN-MAY STAIN THE SKIN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:EYES-FLUSH WITH CLEAN, LUKE-WARM WATER AT LOW PRESSURE FOR AT
LEAST 15 MIN. OCASSIONALLY LIFTING EYELIDS. SEE PHYSICIAN.
SKIN-REMOVE CONTAMINATED CLOTHING. WASH EXPOSED AREA WITH WARM
SOAPY WATER THOR OUGHLY. INHALATION-REMOVE VICTIM FROM AREA OF
EXPOSURE. IF NOT BREATHING, DO CPR. IF HARD TO BREATH, GIVE OXYGEN.
INGESTION-NO ADVERSE EFFECTS ANTICIPATED BY THIS ROUTE OF EXPOSURE.
===================== Fire Fighting Measures =====================
Flash Point Method:COC
Flash Point:425F,218C
Autoignition Temp:Autoignition Temp Text:N.E.
Lower Limits:N.E.
Upper Limits:N.E.
Extinguishing Media:DRY CHEMICAL EXTINGUISHERS SUCH AS MONOAMMONIUM
PHOSPHATE, POTASSIUM SULFATE, POTASSIUM CHLORIDE.
Fire Fighting Procedures:IF WATER IS USED, USE LARGE AMOUNTS. USE
SELF-CONTAINED BREATHING APPARATUS & BODY COVERING PROTECTIVE
CLOTHING.
Unusual Fire/Explosion Hazard:WATER CONTAMINATION WILL RPODUCE CARBON
DIOXIDE. DO NOT RE-SEAL CONTAMINATED CONTAINERS AS PRESSURE BUILDUP
MAY RUPTURE THEM.
================== Accidental Release Measures ==================
Spill Release Procedures:CONRAIN THE SPILLED MATERIAL & THEN COVER WITH
A LOOSE, ABSORBENT MATERIAL SUCH AS OILDRY, VERMICULITE, SAWDUST OR
FULLER'S EARTH. SHOVEL WASTE MATERIAL INTO PROPER WASTE CONTAINERS.
DO NOT MAKE PRESS URE TIGHT. NEUTRALIZE. ALLOW TO STAND 48 HR.
Neutralizing Agent:MIXTURE OF WATER & 3-8% CON. AMMONIUM HYDROXIDE OR
5-10% SODIUM CARBONATE.
====================== Handling and Storage ======================
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NOTE TO PHYSICIAN: NO SPECIFIC ANTIDOTE. SUPPORTIVE
CARE. TREATMENT BASED ON JUDGEMENT OF PHYSICIAN IN RESPONSE TO
REACTIONS OF THE PATIENT. THE MANIFESTATIONS OF RESPIRATORY
SYMPTOMS, INCLUDING PULMO NARY EDEMA, MAY BE DELAYED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:THIS PRODUCT HAS DEMONSTRATED NO OBSERVABLE
EFFECTS AT ROOM TWMPERATURE. HOWEVER, IT IS HIGHLY RECOMMENDED THAT
AN AIR PURIFYING RESPIRATOR WITH ORGANIC FILTER CARTRIDGE BE WORN.
IN ADDITION. IF SPRAY ED, A SUPPLIED AIR SOURCE MUST BE USED.
Ventilation:NATURAL OR MECHANICAL. LOCAL EXHAUST WILL KEEP THE TLV
BELOW MINIMUM IN MOST CASES.
Protective Gloves:NATURAL RUBBER OR POLYVINYL GLOVES
Eye Protection:LIQUID CHEMICAL GOGGLES/FULL FACE SHIELD
Other Protective Equipment:EYE WASH AND SAFETY SHOWER SHOULDBE PROVIDED
IN ALL WORK AREAS.
Work Hygienic Practices:ALL EMPLOYEES SHOULD BE PROPERLY TRAINED.
CONTAMINATED CLOTHING SHOULD BE PROPERLY LAUNDERED BEFORE REUSING
Supplemental Safety and Health
EXTINGUISHING MEDIA: ADDITIONALLY, CARBON DIOXIDE, HIGH EXPANSION
(PROTEINIC) CHEMICAL FOAM, WATER SPRAY FOR LARGE FIRES.
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Melt/Freeze Pt:M.P/F.P Text:<60F,<16C
Vapor Pres:<0.0001
Vapor Density:8.6 AIR=1
Spec Gravity:1.2
Solubility in Water:REACTS
Appearance and Odor:VISCOUS LIQUID, LIGHT TO DARK BROWN COLOR, SLIGHT
AROMATIC OR MUSTY ODOR.
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
WATER, BASES, METAL COMPOUNDS AND SURFACE ACTIVE MATERIALS.
Stability Condition to Avoid:AVOID WATER AS IT REACTS TO FORM HEAT.
Hazardous Decomposition Products:ISOCYANATE VAPOR AND MIST, CARBON
DIOXIDE, CARBON MONOXIDE, NITROGEN AND TRACES OF HYDROGEN CYANIDE.
Conditions to Avoid Polymerization:MAY OCCUR WITH INCOMPATIBLE
REACTANTS, ESPECIALLY STRONG BASES, WATER OR TEMPERATURES OVER
347F.
==================== Disposal Considerations ====================
Waste Disposal Methods:WASTE MATERIAL MAY BE DISPOSED OF UNDER LOCAL,
STATE AND FEDERAL REGULATIONS CONTROLLING ENVIRONMENTAL PROTECTION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
ROYCO 602
| 68649-11-6 |
|
COMPACT 9MM PISTOL TYPE II W/TRITIUM SIGHT
| 10028-17-8 |
|
DIREX
| 330-54-1 |
|
MIL-E-24635A BLACK 37038 PC L8-007
| 64742-95-6
14807-96-6
14808-60-7
8032-32-4 |
|
SOLID REGAIN
| 1310-73-2
141-43-5
111-76-2
7732-18-5 |
|
322611-02611 CYLESSTIC TK 680
| 64742-54-7
8052-42-4 |
|
322611-02611 CYLESSTIC TK 680
| 64742-54-7
8052-42-4 |
|
PT-4121,COMPONENT I
| 108-88-3
108-65-6
78-93-3
141-78-6
71-36-3 |
|
PT-4121,COMPONENT II
| 108-88-3
108-65-6
78-93-3
141-78-6
71-36-3 |
|
1C531, PART 1, POTASSIUM SILICATE
| 1312-76-1 |
|
1C531, PART 2, ZINC DUST
| 7440-66-6
1314-13-2
7439-92-1
7440-43-9 |
|
125311, PART 1 AND PART 2 (MIXED)
| 7440-66-6
7439-92-1
7440-43-9 |
|
3145 RTV ADHES SEALANT-CLEAR
| |
|
700-164-28090, ULINE FAST TACK ADHESIVE #S-
| 71-55-6
68476-86-8
110-54-3 |
|
1529B4 TECHNACELL MAINTENANCE FREE RECHARGE
| 7664-93-9
7439-92-1
1317-36-8 |
|
UTICORT CREAM 0.025%
| 22298-29-9
36653-82-4
57-55-6
8012-95-1 |
|
UTICORT LOTION 0.025%
| 22298-29-9
36653-82-4
57-55-6 |
|
SURITAL 10 GM/VIAL
| 337-47-3 |
|
SURITAL 5 GM/VIAL
| 337-47-3 |
|
DISPOS-A-MED ISOPROTERENOL HCL, 0.5%
| 51-30-9
56-81-5 |
|
CONATHANE EN-6 URETHANE PREPOLYMER PART A
| 584-84-9 |
|
CONATHANE EN-6 PART B
| 3077-13-2
94-96-2 |
|
SCOTCHCAST BRAND ELECTRICAL INSULATING RESIN 2100 (PREPOLY)
| 101-68-8
3648-20-2
69102-90-5
25322-69-4
69102-90-5
3077-13-2
110-98-5
1318-02-1
68187-84-8 |
|
PDL 401 - "A" COMPONENT
| 103-71-9
101-68-8
9016-87-9 |
|
PDL 401 - "B" COMPONENT
| |
|
125-200 SUPERVAL RC DEVELOPER
| 123-31-9
1310-58-3
109-86-4 |
|
| 12001-29-5 |
|
K5197858
| |
|
2431 AUTOMATIC X-RAY FIXER & RREPLR PART A
| 7783-18-8
7757-83-7
64-19-7 |
|
2431 AUTOMATIC INDUST'L X-RAY FIXR HARDR PART B
| 10043-01-3
7664-93-9 |
|
200-,202-,220-,230-,232-,260-,725-,1136-,11
| 7782-42-5
1333-86-4
1305-78-8 |
|
PLIOBOND 20
| 471-34-1
78-93-3
50-00-0 |
|
METHYL ETHYL KETONE
| 78-93-3 |
|
105456
| 12001-29-5 |
|
105456
| |
|
SHELL SU-2000(R) SUPER UNLEADED GASOLINE
| 1330-20-7
108-88-3
71-43-2
110-54-3
1634-04-4
95-63-6
110-82-7
100-41-4
91-20-3 |
|
SHELL SU-2000(R) SUPER UNLEADED GASOLINE
| 1330-20-7
108-88-3
71-43-2
110-54-3
1634-04-4
95-63-6
110-82-7
100-41-4
91-20-3 |
|
SEMI GLOSS RED #21136 ENAMEL
| 64475-85-0
12656-85-8
1330-20-7
70084-67-2
64-17-5
67-56-1 |
|
ASSEMBLY FLUID #1
| 64742-65-0
64742-54-7 |
|
E347-16
| 7439-86-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-03-1
13463-67-7
12030-97-6
1317-65-3
14542-23-5
68476-25-5
68476-25-5
1308-38-9
1312-76-1
1344-09-8
1310-58-3 |
|
340, 340BIL; PACKING MATERIAL
| 12001-29-5 |
|
SODIUM BICARBONATE
| 144-55-8 |
|
VM & P NAPHTHA
| 64742-89-8 |
|
ACTIGEL WHITE - ACTIVATED SILICA GEL
| 63231-67-4 |
|
DESI PAK
| 1302-78-9
14808-60-7 |
|
K5199793
| |
|
KODAK LENS CLEANER
| 7732-18-5
506-87-6
9002-93-1 |
|
T-78
| 1317-95-9
1333-86-4 |
|
DRUM BRAKE SEGMENTS & BLOCKS/DISC BRAKE PAD
| 12001-29-5
14808-60-7
1333-86-4
7782-42-5 |
|
STAINLESS STEEL 2XX TO 5XX SERIES
| 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7782-49-2
7440-48-4
7440-50-8
7440-32-6
7429-90-5
7440-62-2
7440-33-7 |
|
|