===================== Product Identification =====================
MSDS NAME:1529B4 TECHNACELL MAINTENANCE FREE RECHARGE
NIIN:01-356-9849
MSDS Number: BPVLR
=== Responsible Party ===
Company:POWER-SONIC CORP
Address:3106 SPRING ST
Box:5242
City:REDWOOD CITY
State:CA
ZIP:94063-3929
Country:US
Info Phone Num:415-364-5001
Emergency Phone Num:415-364-5001
CAGE:56309
=== Contractor Identification ===
Company:POWER-SONIC CORP
Address:3106 SPRING ST
Box:5242
City:REDWOOD CITY
State:CA
ZIP:94063-3929
Country:US
Phone:650-364-5001
CAGE:56309
Company:THE ROFLAN COMPANY
Box:913
City:NEWBURYPORT
State:MA
ZIP:01950-5613
Country:US
CAGE:86796
============= Composition/Information on Ingredients =============
Name:SULFURIC ACID (SARA III)
CAS:7664-93-9
RTECS #:WS5600000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:LEAD (SARA III)
CAS:7439-92-1
RTECS #:OF7525000
Other REC Limits:NONE RECOMMENDED
OSHA PEL:0.05 MG/M3;1910.1025
ACGIH TLV:0.15 MG/M3;DUST 9293
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:LEAD OXIDE (LITHARGE)
CAS:1317-36-8
RTECS #:OG1750000
Other REC Limits:NONE RECOMMENDED
===================== Hazards Identification =====================
LD50 LC50 Mixture:LD50 (ORAL RAT) IS 2140 MG/KG (H2SO4)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE IRRITATION OF
RESPIRATORY TRACT, EYES, SKIN OR GI TRACT. MAY CAUSE BURNS OF SKIN,
EYES, OR GI TRACT. MAY CAUSE CORNEAL DAMAGE OR BLINDNESS. CHRONIC:
TOOTH EROSION, INFLAMMATION OF NOS E, THROAT AND BRONCHIAL TUBES.
Explanation of Carcinogenicity:THE ELECTROLYTE IS NOT LISTED BY IARC,
NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:INHALATION: BURNING SENSATION IN NOSE, THROAT
AND LUNGS, COUGHING, WHEEZING, SHORTNESS OF BREATH. EYES: REDNESS,
TEARING, BLURRED VISION, BURNS, SEVERE PAIN. SKIN: SEVERE PAIN,
BURNS, REDNESS, RASH, I TCHING. INGESTION: BURNS OF MOUTH, THROAT,
AND ESOPHAGUS, SEVERE STOMACH PAIN, NAUSEA, VOMITING.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF AILMENTS
OR WITH A PRE-EXISTING DISEASE INVOLVING THE RESPIRATORY TRACT OR
TEETH MAY BE AT INCREASED RISK FROM EXPOSURE.
======================= First Aid Measures =======================
First Aid:INHALATION:REMOVE TO FRESH AIR. RESUSCITATE IF NOT BREATHING.
GET MEDICAL ATTENTION. EYES:IMMEDIATELY FLUSH WITH PLENTY OF WATER
FOR 15 MINUTES HOLDING EYELIDS OPEN. GET PROMPT MEDICAL ATTENTION.
SKIN :REMOVE CONTAMINATED CLOTHING. WASH WITHPLENTY OF WATER FOR 15
MINUTES. GET MEDICAL ADVICE. INGESTION:DO NOT INDUCE VOMITING.
GIVE NOTHING BY MOUTH IF UNCONSCIOUS. GET IMMEDIATE MEDICAL
ATTENTION.
===================== Fire Fighting Measures =====================
Extinguishing Media:USE DRY CHEMICAL, CARBON DIOXIDE, FOAM, WATER FOG.
Fire Fighting Procedures:USE OF WATER IN EXTINGUISHING BURNING
BATTERIES MAY CAUSE SPATTERING DUE TO THE PRESENCE OF MOLTEN LEAD.
WEAR SCBA AND FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:AFTER ELECTROLYTE IS ADDED AND BATTERY IS
BEING CHARGED, HYDROGEN GAS IS PRODUCED. BATTERY MAY EXPLODE IF
HYDROGEN GAS TRAPPED INSIDE THE CASE SHOULD IGNITE.
================== Accidental Release Measures ==================
Spill Release Procedures:SHOULD A BATTERY BREAK OPEN, ISOLATE AREA.
ELECTROLYTE SHOULD BE ABSORBED WITH A NON-ORGANIC TYPE ABSORBENT
SUCH AS DRY SAND OR EARTH. AVOID DILUTION WITH WATER. LEAD SPILLED
FROM THE BATTERY SHOULD B E VACUUMED, DO NOT SWEEP OR USE
COMPRESSED AIR.
Neutralizing Agent:USE SODA ASH OR BAKING SODA TO NEUTRALIZE THE
ELECTROLYTE.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID THE USE OF UNINSULATED TOOLS. IF
THEY ARE REQUIRED, TAKE CARE NOT TO ELECTRICALLY SHORT THE
TERMINALS. REMOVE METAL JEWELRY BEFORE SERVICING.
Other Precautions:UNDER NORMAL CONDITIONS OF USE, EXPOSURE TO LEAD OR
LEAD CONTAINING COMPOUNDS DOES NOT OCCUR. SHOULD A BATTERY BREAK
OPEN AND A LEAD SPILL OCCUR, PRECAUTIONS SHOULD BE TAKEN TO PREVENT
LEAD DUST FROM BECOMING AIR BORNE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:UNDER NORMAL CONDITIONS OF USE, RESPIRATORY
PROTECTION IS NOT REQUIRED. HOWEVER, IF CONDITIONS ARISE THAT
REQUIRE THEIR USE, USE ONLY NIOSH/MSHA RESPIRATORS APPROVED FOR
DUST, FUME AND MIST.
Ventilation:BATTERY CHARGING AREAS MUST BE ADEQUATELY VENTILATED TO
PREVENT HAZARDOUS CONCENTRATIONS OF FLAMMABLE GAS OR ACID MIST.
Protective Gloves:RUBBER GLOVES APPROVED FOR SULFURIC ACID
Eye Protection:CHEMICAL SPLASH GOGGLES AND FACE SHIELD
Other Protective Equipment:EYE WASH STATION AND SAFETY SHOWER.
INDUSTRIAL-TYPE IMPERVIOUS WORK CLOTHING, BOOTS AND APRON AS
REQUIRED.
Work Hygienic Practices:OBSERVE GOOD PERSONAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
RQ FOR CERCLA AND SARA III IS 1000 LBS (ELECTROLYTE). MSDS WRITTEN FOR
ELECTROLYE- IT IS THE PRIMARY HAZARD DURING NORMAL USE AND
HANDLING.
================== Physical/Chemical Properties ==================
HCC:Z4
Boiling Pt:=113.9C, 237.F
Melt/Freeze Pt:=-70.C, -94.F
Vapor Pres:9.9(AIR=1)
Vapor Density:>1 (AIR=1)
Spec Gravity:1.28 (WATER=1)
Evaporation Rate & Reference:<1 (N-BUTYL ACETATE=1)
Solubility in Water:COMPLETE (ACID)
Appearance and Odor:COLORLESS GEL WITH SHARP, PUNGENT ODOR
(ELECTROLYTE)
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
CONTACT OF ELECTROLYTE WITH ORGANIC MATERIAL AND COMBUSTIBLES, STRONG
ALKALIS, REDUCING AGENTS, STRONG OXIDIZING AGENTS
Stability Condition to Avoid:OVERCHARGING, SOURCES OF IGNITION
Hazardous Decomposition Products:SULFURIC ACID MIST, SULFUR DIOXIDE AND
CARBON MONOXIDE MAY BE RELEASED WHEN ELECTROLYTE DECOMPOSES.
==================== Disposal Considerations ====================
Waste Disposal Methods:BOTH ELECTROLYTE AND SCRAP BATTERIES ARE
REGULATED HAZARDOUS WASTE. SCRAP BATTERIES CONTAIN MATERIALS WHICH
ARE RECYCLABLE AND MUST BE RETURNED TO AUTHORIZED RECYCLER.
ELECTROLYTE SHOULD BE HAULED TO A PERMITTED TREATMENT FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
ROYCO 602
| 68649-11-6 |
|
COMPACT 9MM PISTOL TYPE II W/TRITIUM SIGHT
| 10028-17-8 |
|
DIREX
| 330-54-1 |
|
MIL-E-24635A BLACK 37038 PC L8-007
| 64742-95-6
14807-96-6
14808-60-7
8032-32-4 |
|
SOLID REGAIN
| 1310-73-2
141-43-5
111-76-2
7732-18-5 |
|
322611-02611 CYLESSTIC TK 680
| 64742-54-7
8052-42-4 |
|
322611-02611 CYLESSTIC TK 680
| 64742-54-7
8052-42-4 |
|
PT-4121,COMPONENT I
| 108-88-3
108-65-6
78-93-3
141-78-6
71-36-3 |
|
PT-4121,COMPONENT II
| 108-88-3
108-65-6
78-93-3
141-78-6
71-36-3 |
|
1C531, PART 1, POTASSIUM SILICATE
| 1312-76-1 |
|
1C531, PART 2, ZINC DUST
| 7440-66-6
1314-13-2
7439-92-1
7440-43-9 |
|
125311, PART 1 AND PART 2 (MIXED)
| 7440-66-6
7439-92-1
7440-43-9 |
|
3145 RTV ADHES SEALANT-CLEAR
| |
|
700-164-28090, ULINE FAST TACK ADHESIVE #S-
| 71-55-6
68476-86-8
110-54-3 |
|
1529B4 TECHNACELL MAINTENANCE FREE RECHARGE
| 7664-93-9
7439-92-1
1317-36-8 |
|
UTICORT CREAM 0.025%
| 22298-29-9
36653-82-4
57-55-6
8012-95-1 |
|
UTICORT LOTION 0.025%
| 22298-29-9
36653-82-4
57-55-6 |
|
SURITAL 10 GM/VIAL
| 337-47-3 |
|
SURITAL 5 GM/VIAL
| 337-47-3 |
|
DISPOS-A-MED ISOPROTERENOL HCL, 0.5%
| 51-30-9
56-81-5 |
|
CONATHANE EN-6 URETHANE PREPOLYMER PART A
| 584-84-9 |
|
CONATHANE EN-6 PART B
| 3077-13-2
94-96-2 |
|
SCOTCHCAST BRAND ELECTRICAL INSULATING RESIN 2100 (PREPOLY)
| 101-68-8
3648-20-2
69102-90-5
25322-69-4
69102-90-5
3077-13-2
110-98-5
1318-02-1
68187-84-8 |
|
PDL 401 - "A" COMPONENT
| 103-71-9
101-68-8
9016-87-9 |
|
PDL 401 - "B" COMPONENT
| |
|
125-200 SUPERVAL RC DEVELOPER
| 123-31-9
1310-58-3
109-86-4 |
|
| 12001-29-5 |
|
K5197858
| |
|
2431 AUTOMATIC X-RAY FIXER & RREPLR PART A
| 7783-18-8
7757-83-7
64-19-7 |
|
2431 AUTOMATIC INDUST'L X-RAY FIXR HARDR PART B
| 10043-01-3
7664-93-9 |
|
200-,202-,220-,230-,232-,260-,725-,1136-,11
| 7782-42-5
1333-86-4
1305-78-8 |
|
PLIOBOND 20
| 471-34-1
78-93-3
50-00-0 |
|
METHYL ETHYL KETONE
| 78-93-3 |
|
105456
| 12001-29-5 |
|
105456
| |
|
SHELL SU-2000(R) SUPER UNLEADED GASOLINE
| 1330-20-7
108-88-3
71-43-2
110-54-3
1634-04-4
95-63-6
110-82-7
100-41-4
91-20-3 |
|
SHELL SU-2000(R) SUPER UNLEADED GASOLINE
| 1330-20-7
108-88-3
71-43-2
110-54-3
1634-04-4
95-63-6
110-82-7
100-41-4
91-20-3 |
|
SEMI GLOSS RED #21136 ENAMEL
| 64475-85-0
12656-85-8
1330-20-7
70084-67-2
64-17-5
67-56-1 |
|
ASSEMBLY FLUID #1
| 64742-65-0
64742-54-7 |
|
E347-16
| 7439-86-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7440-03-1
13463-67-7
12030-97-6
1317-65-3
14542-23-5
68476-25-5
68476-25-5
1308-38-9
1312-76-1
1344-09-8
1310-58-3 |
|
340, 340BIL; PACKING MATERIAL
| 12001-29-5 |
|
SODIUM BICARBONATE
| 144-55-8 |
|
VM & P NAPHTHA
| 64742-89-8 |
|
ACTIGEL WHITE - ACTIVATED SILICA GEL
| 63231-67-4 |
|
DESI PAK
| 1302-78-9
14808-60-7 |
|
K5199793
| |
|
KODAK LENS CLEANER
| 7732-18-5
506-87-6
9002-93-1 |
|
T-78
| 1317-95-9
1333-86-4 |
|
DRUM BRAKE SEGMENTS & BLOCKS/DISC BRAKE PAD
| 12001-29-5
14808-60-7
1333-86-4
7782-42-5 |
|
STAINLESS STEEL 2XX TO 5XX SERIES
| 7439-89-6
7440-47-3
7440-02-0
7439-96-5
7440-21-3
7439-98-7
7782-49-2
7440-48-4
7440-50-8
7440-32-6
7429-90-5
7440-62-2
7440-33-7 |
|
|