===================== Product Identification =====================
MSDS NAME:HETRON 692
NIIN:00N034025
MSDS Number: BPWBF
=== Responsible Party ===
Company:ASHLAND CHEMICAL INC
Box:2219
City:COLUMBUS
State:OH
ZIP:43216-2219
Country:US
Info Phone Num:614-790-3333
Emergency Phone Num:800-274-5263
CAGE:34897
=== Contractor Identification ===
Company:ASHLAND CHEMICAL CO
Box:2219
City:COLUMBUS
State:OH
ZIP:43216-2219
Country:US
Phone:614-790-3333/800-274-5263
CAGE:34897
============= Composition/Information on Ingredients =============
Name:ING 6: MATERIALS TO CONTAINERS FOR DISPOSAL.
RTECS #:9999999ZZ
Name:WASTE DISP METH: DEPOSITED IN A LANDFILL IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.
RTECS #:9999999ZZ
Name:RESP PROT: CNDTNS (SEE YOUR SAFETY EQUIP SUPPLIER).
ENGINEERING OR ADMIN CNTRLS SHOULD BE IMPLEMENTED TO REDUCE EXPOS.
RTECS #:9999999ZZ
Name:SUPP DATA: POLYM WILL TAKE PLACE UNDER FIRE CNDTNS. IF
POLYM OCCURS IN CLSD CNTNR, POSS VIOLENT RUPTURE. COOL (ING 11)
RTECS #:9999999ZZ
Name:ING 10: STORAGE CONTAINER WITH WATER IF EXPOSED TO FIRE.
RTECS #:9999999ZZ
Name:ING 5: PROD TO CLEAN CNTNRS FOR RECOVERY. ABSORB
UNRECOVERABLE PRODUCT. TRANSFER CONTAM ABSORB, SOIL & OTHER (ING 7)
RTECS #:9999999ZZ
Name:POLYESTER RESIN
Fraction by Wt: 70-75%
Name:STYRENE (SARA III)
CAS:100-42-5
RTECS #:WL3675000
Fraction by Wt: 25%
OSHA PEL:100 PPM
ACGIH TLV:S,50PPM/100STEL;9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:FIRST AID PROC: HAS STOPPED, GIVE ARTIFICIAL RESPIRATION.
KEEP PERSON WARM, QUIET, AND GET MEDICAL ATTENTION.
RTECS #:9999999ZZ
Name:SPILL PROC: UNTIL CLEAN-UP HAS BEEN COMPLETED. STOP SPILL
AT SOURCE. PVNT FROM ENTERING DRAINS, SEWERS, STREAMS/ (ING 5)
RTECS #:9999999ZZ
Name:ING 4:OTHER BODIES OF H*2O.PVNT FROM SPREADING.IF RUNOFF
OCCURS,NOTIFY AUTH AS REQD.PUMP/VACUUM TRANSFER SPILLED (ING 6)
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES:CAN CAUSE SEVERE
IRRITATION, REDNESS, TEARING, BLURRED VISION. SKIN:PROLONGED OR
REPEATED CONTACT CAN CAUSE MODERATE IRRITATION, DEFATTING,
DERMATITIS. INHALATION: EXCESSIVE INHALATION OF VAPORS CAN CAUSE
NASAL AND RESPIRATORY IRRITATION, CENTRAL NERVOUS SYSTEM EFFECTS
INCLUDING DIZZINESS, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:STYRENE: GROUP 2B (IARC).
Effects of Overexposure:HLTH HAZ: WEAK, FATIGUE, NAUS, HDCH & POSS
UNCON, AND EVEN DEATH. INGEST: CAN CAUSE GI IRRIT, NAUSEA,
VOMITING, & DIARR. CHRONIC: OVEREXPOSURE TO STYRENE HAS APPARENTLY
BEEN FOUND TO CAUSE THE FOLLOWI NG EFFECTS IN LABORATORY ANIMALS:
LIVERABNORMALITIES, KIDNEY DAMAGE AND LUNG DAMAGE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:SKIN: THORO WASH EXPOS AREA W/SOAP & H*2O. REMOVE CONTAM
CLTHG. LAUNDER CONTAM CLTHG BEFORE RE-USE. EYES: FLUSH W/LRG AMTS
OF H*2O FOR AT LST 15 MIN, LIFTING UPPER & LOWER LIDS OCCAS, GET
MED ATTN. IN GEST: DO NOT INDUCE VOMIT, KEEP PERSON WARM, QUIET, &
GET MED ATTN. ASPIR OF MATL INTO LUNGS DUE TO VOMIT CAN CAUSE CHEM
PNEUM WHICH CAN BE FATAL. INHAL: REMOVE INDIV TO FRESH AIR. IF
BRTHG (ING 3)
===================== Fire Fighting Measures =====================
Flash Point:>73F,>22.8C
Lower Limits:1.1%
Upper Limits:6.1%
Extinguishing Media:REGULAR FOAM OR WATER FOG OR CARBON DIOXIDE OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:VAPS ARE HVR/AIR & MAY TRAVEL ALONG
GROUND/MAY BE MOVED BY VENT & IGNITED BY PILOT LIGHTS, OTHER
FLAMES, SPARKS, HEATERS, SMOKING, ELEC MOTORS, STATIC (SUPDAT)
================== Accidental Release Measures ==================
Spill Release Procedures:SML SPILL:ABSORB LIQ ON VERMICULITE, FLOOR
ABSORB/OTHER ABSORB MATL & TRANSFER TO HOOD.LRG SPILL:ELIMINATE ALL
IGNIT SOURCES (FLARES, FLAMES INCL PILOT LIGHTS,ELEC SPARKS).
PERSONS NOT WEARING PROT EQ UIP SHOULD BE EXCLUDED FROM AREA OF
SPILL (ING 4)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:CNTNRS OF MATL MAY BE HAZ WHEN
EMPTIED.SINCE EMPTIED CNTNRS RETAIN PROD RESIDUES(VAP,LIQ,&/OR
SOLID),ALL HAZ PREC GIVEN IN DATA SHEET MUST BE OBSERVED
Other Precautions:EXPOS TO AEROSOLS & MISTS WHEN MATL IS SPRAYED MAY
PRESENT GREATER RISK OF INJ FROM COMPONENTS BECAUSE HIGHER CONC ARE
IN ATMOSPHERE THAN RSLT FROM VAP ALONE.PROVIDE ADEQ VENT & IF NEC,
USE NIOSH/MSHA APPROVED RESPIRATORY PROTECTION.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF WORKPLACE EXPOS LIMIT(S) OF PROD/ANY
COMPONENT IS EXCEEDED, A NIOSH/MSHA APPRVD AIR SUPPLIED RESP IS
ADVISED IN ABSENCE OF PROPER ENVIRON CNTRL. OSHA REGS ALSO PERMIT
OTHER NIOSH/MSHA APPRVD RESP ( NEG PRESS TYPE) UNDER SPECIFIED (ING
9)
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL AND/OR LOCAL
EXHAUST) VENTILATION TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:POLYVINYL ALCOHOL GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS AND LEGS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ: DISCHARGE/OTHER IGNIT SOURCES AT LOCATIONS DISTANT FROM MATL
HNDLG POINT.ALL 5 GAL PAILS & LRGR METAL CNTNRS INCL TANK CARS &
TANK TRUCKS SHOULD BE GROUNDED &/OR BONDED WHEN MATL IS TRANSFE
RRED. NEVER USE WELDING/CUTTING TORCH ON/NEAR DRUM(EVEN EMPTY)
BECAUSE PROD(EVEN JUST RESIDUE) CAN IGNITE EXPLO.(ING 10)
================== Physical/Chemical Properties ==================
HCC:F4
Boiling Pt:B.P. Text:293F,145C
Vapor Pres:4.5 @ 68F
Vapor Density:HVR/AIR
Spec Gravity:1.379 @ 77F
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:CLEAR AMBER COLORED LIQUID, HOMOG SOLN
Percent Volatiles by Volume:23-27
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:CO*2 AND CO,, VARIOUS HYDROCARBONS,
ETC.
Conditions to Avoid Polymerization:EXCESSIVE HEAT, PEROXIDES AND
POLYMERIZATION CATALYSTS.
==================== Disposal Considerations ====================
Waste Disposal Methods:SML SPILL:ALLOW VOLAT PORTION TO EVAP IN HOOD.
ALLOW SUFF TIME FOR VAPS TO COMPLETELY CLEAR HOOD DUCT WORK.DISP OF
REMAINING MATL I/A/W FED, ST & LOC REGS.LRG SPILL: DESTROY BY LIQ
INCIN I/A/W APPLIC FED, ST & LOC REGS. CONTAM ABSORB MAY BE (ING
8)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
0450556, GREASE NO. 17 LUBE
| 64742-18-3
64742-54-7
7620-77-1
7631-99-4 |
|
INDUCOTE 601-86 EPOXY COMPONENT B, 13-142
| 64742-95-6 |
|
20-496, PREMIUM ALUMINUM ROOF COATING
| 64742-88-7 |
|
BAQUA CARE TOTAL ALKALINITY INCREASER-12
| 144-55-8 |
|
URALITE 3109 PREPOLYMER
| 91-08-7
9040-19-1 |
|
URACURE 3740
| 106264-79-3
66101-60-8
26545-49-3 |
|
NABC DEODORIZING RIM CAGES
| 25322-68-3
3844-45-9 |
|
NABC URINAL SCREENS WITH DEODORIZING BLOCKS
| 75-56-9
9004-99-3 |
|
ZING FLOOR COATING
| |
|
FIRM FOOT
| 8052-41-3
8030-30-6
64-17-5
13463-67-7
7631-86-9
14464-46-1
67-64-1
74-98-6
75-28-5
106-97-8 |
|
GLAS-WEB, 3025
| 14808-60-7 |
|
INVISIBLE DETECTION PASTE, 726UV
| 1314-98-3
8012-95-1 |
|
CARBON AND ALLOY STEELS
| 7439-89-6
7429-90-5
7440-69-9
7440-42-8
7440-44-0
7440-47-3
7440-25-7
7440-50-8
7439-92-1
7439-96-5
7439-98-7
7440-02-0
7723-14-0
7440-21-3
7704-34-9
7440-62-2
7440-66-6
7429-90-5 |
|
GLYCLEAN ANTIFREEZE EXTENDER
| 1310-73-2
1310-58-3 |
|
ALCOA FILLER COMPOUND
| |
|
FOMOSPRAY
| 101-68-8 |
|
KINEPAK LIQUID COMPONENT A (NITROMETHANE)
| 75-52-5
79-24-3 |
|
KINEPAK SOLID COMPONENT B (AMMONIUM NITRATE
| 6484-52-2 |
|
QUICK CARVE/MAHOGANY
| 1480-96-6
60676-86-0
65997-17-3
13463-67-7
100-42-5 |
|
40 9210 SILVER ROCK
| 8032-32-4
7429-90-5 |
|
48317, 2,4,5,6-TETRACHLORO-M-XYLENE 200UG/M
| 877-09-8
67-56-1 |
|
PLASITE 4300 PART 1, 4300A000A-03
| 68002-44-8
100-42-5 |
|
PLASITE 4300 PART 2,4300A00B-02
| 116-14-3
12001-26-2
1309-37-1
61789-51-3 |
|
PLASITE 4300 PART 3,4300A000C-02
| 67-56-1
108-10-1
110-19-0
37187-22-7
80-15-9
64-17-5
67-63-0 |
|
TINPOSIT LT-26
| 62-56-6
7772-99-8
10039-56-2 |
|
MICROPOSIT S1400 PHOTO RESIST
| 111-15-9
123-86-4
1330-20-7 |
|
SF-80T3 BLUE TONER
| 147-14-8
102561-46-6
1317-80-2
25767-47-9 |
|
SF-80DV2 RED DEVELOPER
| 1317-80-2
7439-89-6
24937-79-9
25767-47-9
6655-84-1
102561-46-6 |
|
ZINC POWDER 1212
| 7440-66-6
7439-92-1 |
|
ZINC POWDER 1222
| 7440-66-6
7439-92-1 |
|
ZINC POWDER 1225
| 7440-66-6
7439-92-1 |
|
2606 PRO STRIP
| 75-09-2
67-56-1
108-88-3
74-98-6
106-97-8 |
|
2409 DOWN & OUT
| 7664-93-9
95-49-8 |
|
85U34095, GREEN
| 18540-29-9
78-93-3
108-88-3
108-65-6
7439-92-1 |
|
SEA GULL GRAY SG AD EN, 34-10935
| 64742-89-8
71-36-3
108-88-3
7439-92-1 |
|
LF RED EXPOXY, 22A11136
| 108-88-3
2807-30-9
78-93-3 |
|
POWDER-ENE II
| 64742-48-9
71-55-6
9011-13-6 |
|
DEFOAMER
| |
|
SMOKE-X
| 64-17-5
64-17-5 |
|
NO. 5062 DEVOUR REMOVER AERO.
| 75-09-2
111-76-2 |
|
GLO-BASE SEAL, 125566
| 78-51-3
111-77-3
7732-18-5
25086-31-1 |
|
27-225, HOUSE PAINT PRIMER
| 1330-20-7
100-41-4
8052-41-3
133-07-3
14807-96-6 |
|
CONDUCTIVITY REAGENT A R5219, Z219
| 10043-35-3 |
|
56 3/32 SILVER ALLOY, 14115
| 7440-22-4
7440-50-8
7440-66-6
7440-43-9 |
|
12980, 429 1/8 AC-DC REPAIR ALLOY
| 7789-29-9
513-77-9
1317-65-3
112945-52-5
7440-31-5
7440-50-8 |
|
C1313R419, CLASS/COPY CARTRIDGE
| 29936-68-3
89505-08-8
128-37-4
67821-33-4 |
|
NZ-5128 ADHESIVE
| 108-88-3 |
|
HETRON 692
| 100-42-5 |
|
F45-0022-000, INK CARTRIDGE BLACK BC-01
| 7732-18-5
56-81-5
67-63-0 |
|
INK CARTRIDGE BLACK BC-01, F45-0023-000
| 7732-18-5
56-81-5
67-63-0 |
|
|