===================== Product Identification =====================
MSDS NAME:MS-460 CONFORMAL COATING
NIIN:00N006027
MSDS Number: BCLTV
=== Responsible Party ===
Company:MILLER-STEPHENSON CHEMICAL CO, INC.
Address:GEORGE WASHINGTON HWY
Box:950
City:DANBURY
State:CT
ZIP:06810
Country:US
CAGE:18598
=== Contractor Identification ===
Company:MILLER-STEPHENSON CHEMICAL CO INC
Address:55 BACKUS AVE/GEORGE WASHINGTON HWY
Box:950
City:DANBURY
State:CT
ZIP:06810
Country:US
Phone:203-743-4447
CAGE:18598
============= Composition/Information on Ingredients =============
Name:TOLUENE (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: <2.0%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:METHYLTRIMETHOXYSILANE
CAS:1185-55-3
RTECS #:VV4650000
Fraction by Wt: <1.0%
===================== Hazards Identification =====================
Effects of Overexposure:SKIN/EYE:IRRITATION. INHAL:CONCENTRATED VAPORS
MAY CAUSE DIZZINESS,NARCOSIS,ANESTHESIA, OR SUFFOCATN
======================= First Aid Measures =======================
First Aid:INHAL:REMOVE TO FRESH AIR. IF NECESSARY GIVE ARTIFICIAL
RESPIRATION OR OXYGEN. DO NOT GIVE EPINEPHRINE OR SIMILAR DRUGS.
EYE:FLUSH W/ WATER IMMEDIATELY & CALL A PHYSICIAN.
===================== Fire Fighting Measures =====================
Extinguishing Media:CO*2 OR FOAM.
Unusual Fire/Explosion Hazard:PRESS AEROS CNTNR AT ELEV TEMP MAY VENT,
BURST OR RUPT & CAUSE FLY & FALL DEBRIS. SEE OTHER PRECAUT.
================== Accidental Release Measures ==================
Spill Release Procedures:VENTILATE AREA. MOP, WIPE OR SOAK UP SPILL W/
ABSORBENT MATERIAL USING PROPER PROTECTIVE EQUIPMENT. WASH HANDS W/
SOAP & WATER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT STORE NEAR SOURCES OF HEAT, IN
DIRECT SUNLIGHT, OR WHERE TEMP EXCEED 49C. ROTATE STOCK TO SHELF
LIFE OF 1 YR. DO NOT PUNCTURE OR INCINERAT CNTR
Other Precautions:UNUS FIRE & EXPLO HAZ:INTENSE HEAT MAY CAUSE DECOMP
TO SILICON HALOGENIDES ALSO. CURE HYDROLYSIS OF RESINS MAY LIBERATE
SLIGHT AMOUNTS OF METHANOL. PROVIDE ADEQUATE VENTILATION.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPRV ORGANIC VAPOR TYPE RESP PROTECT
AS NEED. CONSULT IH
Ventilation:LOCAL EXHAUST TO MAINTAIN TLV REQUIRMENTS.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:290F
Vapor Pres:640
Vapor Density:4.3
Spec Gravity:0.9
Evaporation Rate & Reference:<1 (ETHER=1).
Solubility in Water:<0.1
Appearance and Odor:VISCOUS LIQUID W/ SOLVENT ODOR.
Percent Volatiles by Volume:89.9
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS & FINELY DIVIDED REACTIVE METALS.
Hazardous Decomposition Products:IN FIRES:HALOGEN
ACIDS,CO,SIO*2,COCL*2. SEE OTHER PRECAUTION
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IAW LOCAL, STATE & FEDERAL
REGULATIONS & CODES. DO NOT PUNCTURE OR INCINERATE AEROSOL CANS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|