===================== Product Identification =====================
MSDS NAME:PARABOND P-8
NIIN:00N006040
MSDS Number: BCLVB
=== Responsible Party ===
Company:PARA-CHEM INC
Emergency Phone Num:803-967-7691
CAGE:HO208
=== Contractor Identification ===
Company:PARA CHEM
Box:127
City:SIMPSONVILLE
State:SC
ZIP:29681
Country:US
Phone:864-967-7691
CAGE:15934
Company:PARA-CHEM INC
CAGE:HO208
============= Composition/Information on Ingredients =============
Name:DIMETHYLFORMAMIDE
CAS:68-12-2
RTECS #:LQ2100000
Fraction by Wt: 4.3%
OSHA PEL:S, 10 PPM
ACGIH TLV:S, 10 PPM; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:CYCLOHEXANONE (SARA III)
CAS:108-94-1
RTECS #:GW1050000
Fraction by Wt: 4.2%
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:TETRAHYDROFURAN (SARA III)
CAS:109-99-9
RTECS #:LU5950000
Fraction by Wt: 47.7%
OSHA PEL:200 PPM/250 STEL
ACGIH TLV:200 PPM/250STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 31.8%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:RESIN & ADDITIVES
Fraction by Wt: 12%
===================== Hazards Identification =====================
Effects of Overexposure:EYE/SKIN: IRRITATION. VAPORS: RESP
IRRITATION,ANESTHETIC
======================= First Aid Measures =======================
First Aid:EYE: FLUSH WITH WATER 15 MINUTES,CONSULT PHYSICIAN. SKIN:
FLUSH WITH SOAP & WATER,CALL PHYSICIAN. INHALATION: REMOVE TO FRESH
AIR,GIVE ARIFICIAL RESPIRATION IF NEEDED,CALL PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point:<20F/-6C
Lower Limits:1.1
Upper Limits:15.2
Extinguishing Media:FOAM,DRY CHEM. ALCOHOL FOAM FOR LARGE FIRES
Fire Fighting Procedures:SELF-CONTAIN BREATH APP
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE IGNITION SOURCES. DIKE LARGE SPILLS
AND REMOVE TO SALVAGE TANKS OR DRUMS. USE ABSORBENT DISPOSAL
PROCEDURE.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP IN COOL PLACE AWAY FROM IGNITION
SOURCES,USE IN AREAS AWAY FROM FLAMES OR SPARKS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:EXPLOSION PROOF LOCAL/MECHANICAL
Protective Gloves:YES
Eye Protection:GOGGLES
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:149F/65C
Vapor Pres:51
Vapor Density:3
Spec Gravity:0.9112
Evaporation Rate & Reference:5.46 (BUTYL ACET)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR,SLIGHT VISCOUS,KETONE ODOR.
Percent Volatiles by Volume:88
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:SPARKS & OTHER IGNITION SOURCES
Hazardous Decomposition Products:CO AND/OR CO*2
==================== Disposal Considerations ====================
Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|