Search   
MSDS  : DEK LUBE COAT, NAPCO
CAS  : 71-55-6
75-45-6
NAME  : methyl chloroform (1,1,1-trichloroethane) (sara iii)
methane, chlorodifluoro-; (chlorodifluoromethane)
===================== Product Identification =====================

MSDS NAME:DEK LUBE COAT, NAPCO
NIIN:00N034922
MSDS Number: BQCBR
=== Responsible Party ===
Company:AMERICAN CHEMICAL & FLUX PRODUCTS
Address:5722 UNION PACIFIC AVE
City:LOS ANGELES
State:CA
ZIP:90022
Country:US
Info Phone Num:213-723-0713
Emergency Phone Num:213-723-0713
CAGE:OBTX0
=== Contractor Identification ===
Company:AMERICAN CHEMICAL CORP
Address:35555 CURTIS BLVD
Box:City:EAST LAKE
State:OH
ZIP:44094
Phone:215-943-7600
CAGE:OBTX0
Company:MARCO CO
Address:5722 UNION PACIFIC AVENUE
Box:City:LOS ANGELES
State:CA
ZIP:90022-5135
Country:US
Phone:213-723-0711
CAGE:55278

============= Composition/Information on Ingredients =============

Name:METHYL CHLOROFORM (1,1,1-TRICHLOROETHANE) (SARA III)
CAS:71-55-6
RTECS #:KJ2975000
Fraction by Wt: 62%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:350 PPM
ACGIH TLV:350 PPM/450STEL;9394
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Ozone Depleting Chemical:1

Name:METHANE, CHLORODIFLUORO-; (CHLORODIFLUOROMETHANE)
CAS:75-45-6
RTECS #:PA6390000
Fraction by Wt: 13%
OSHA PEL:1000 PPM
ACGIH TLV:1000 PPM
Ozone Depleting Chemical:2

===================== Hazards Identification =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:NAUSEA. EYES:MINOR IRRIT.
INHAL:DIZZINESS. SKIN:MINOR IRRIT. CHLOROFLUOROCARBON MATERIALS
HAVE PRODUCED SENSITIZATION OF THE MYOCARDIUM TO EPINEPHRINE IN LAB
ANIMALS & COULD HAVE A SIMILAR EFT IN HUMANS. ADRENOMIMETICS
(E.G., EPINEPHRINE) MAY BE CONTRAINDICATED EXCEPT FOR
LIFE-SUSTAINING USES (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: IN HUMANS ACUTELY OR CHRONICALLY
EXPOSED TO CFC'S .
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

======================= First Aid Measures =======================

First Aid:INGEST: GET MEDICAL HELP. EYES: FLUSH WITH WATER FOR AT LEAST
15 MIN. INHAL: REMOVE TO FRESH AIR. CALL A PHYSICIAN. GIVE
MOUTH-TO-MOUTH RESUSCITATION IF BREATHING STOPS. SKIN: WASH WITH
WATER.

===================== Fire Fighting Measures =====================

Flash Point Method:CC
Flash Point:SUPP DATA
Extinguishing Media:WATER FOG, STANDARD FOAM, CO*2.
Fire Fighting Procedures:EXPOS TO TEMPS >120F MAY CAUSE
BURSTING/VENTING. KEEP CNTNRS COOL. USE NIOSH/MSHA APPRVD PRESS
DEMAND SCBA & FULL PROT EQUIP TO PROT PERSONNEL (SUPP DATA)
Unusual Fire/Explosion Hazard:OVERHEATED, CLOSED CONTAINERS ADJACENT TO
FIRE COULD EXPLODE DUE TO PRESSURE BUILDUP. THERMAL DECOMP PRODS
MAY INCL CHLORIDES, FLUORIDES & PHOSGENE .

================== Accidental Release Measures ==================

Spill Release Procedures:MOP UP, SOAK UP OR WIPE UP IMMEDIATELY.
PROVIDE VENTILATION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

====================== Handling and Storage ======================

Handling and Storage Precautions:DO NOT STORE WHERE TEMPERATURE COULD
EXCEED 120F.
Other Precautions:USE AND FOLLOW LABEL DIRECTIONS. NO SMOKING IN AREA
OF USE. DO NOT USE IN THE GENERAL VICINITY OF ARC WELDING, OPEN
FLAMES OR HOT SURFACES. HEAT AND/OR UV RADIATION CAN CAUSE THE
FORMATION OF CHLORIDE S, FLUORIDES &/OR PHOSGENE .

============= Exposure Controls/Personal Protection =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST: ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
VAP PRESS: COMPRESSED GAS. FIRE FIGHT PROC: AGAINST BURSTING OR VENTING
CONTAINERS. DO NOT PUNCTURE OR INCINERATE CONTAINER. FLASH PT:
CONTENTS W/O PROPELLENT: -50F; PACKAGED PROD WITH PROPELLENT: NON
-FLAMMABLE.

================== Physical/Chemical Properties ==================

HCC:T4
Vapor Pres:SUPP DATA
Vapor Density:GTR/AIR
Evaporation Rate & Reference:GREATER THAN H*2O
Solubility in Water:VERY SLIGHT
Appearance and Odor:AMBER LIKE LIQUID.
Percent Volatiles by Volume:75(WT)

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:DO NOT STORE ABOVE 120F.
Hazardous Decomposition Products:CHLORIDES, FLUORIDES AND PHOSGENE .

==================== Disposal Considerations ====================

Waste Disposal Methods:DO NOT PUNCTURE OR INCINERATE "EMPTY" OR FULL
CANS. ONCE SPILLS OR LEAKS ARE CLEANED UP. DISPOSE OF WASTE IN
ACCORDANCE WITH FEDERAL, STATE, LOCAL AND GOVERNMENTAL ORDINANCES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
XEROX XD-37 DEVELOPER 7439-89-6
9011-14-7
39382-25-7
1333-86-4
9003-07-4
BITUMASTIC 300M BLACK OR RED (COMPONENT A ( 8007-45-2
1330-20-7
67-56-1
VAN STRAATEN 560 102-71-6
111-42-2
64742-52-5
107-41-5
141-43-5
68920-70-7
HYDROXYACETIC ACID 70% SOLUTION, T1004 79-14-1
7732-18-5
SOLDER PASTE WITH WMA-SMQ60 FLUX 7440-36-0
7439-92-1
7440-31-5
7440-22-4
ELEPHANT BLOCKS 106-46-7
CLEANER CL58 64742-48-9
ASPHALT ROOF COATING 454(ASBESTOS-FREE), (S 1327-43-1
8032-32-4
8052-41-3
8052-42-4
HYDRO-SOL DEGREASER CONCENTRATE 111-76-2
1344-09-8
26027-38-3
1310-73-2
KLINGERIT 3 X A 12001-29-5
CEILING TILE ADHESIVE, 1644 785 107-21-1
64742-89-8
FIBER GLASS DUCT SYSTEM 65997-17-3
25104-55-6
ACOUSTILEAD 7439-92-1
WASP & HORNET SPRAY CINCH WHITE, TM-2526 8003-34-7
63-25-2
64742-88-7
71-55-6
ELECTRIC CONTACT CLEANER TM-1568, 78116 71-55-6
124-38-9
ANTI-SEIZE HIGH TEMPERATURE THREAD COMPOUND 7440-50-8
7782-42-5
ANTI-SEIZE HIGH TEMPERATURE THREAD COMPOUND 7440-50-8
7782-42-5
CALUSA HYDROKLEEN--GWC 23-19) 25155-30-0
64-17-5
1310-58-3
9016-45-9
TITANIUM BASE ALLOY 7440-32-6
7440-62-2
7440-67-7
7429-90-5
7439-98-7
7440-31-5
SPECIALTY/STAINLESS STEEL 7429-90-5
1333-86-4
7440-47-3
7440-48-4
7440-50-8
1309-37-1
7439-96-5
7439-98-7
7440-02-0
7440-21-3
7446-09-5
13463-67-7
7440-33-7
1314-62-1
HIGH TEMPERATURE & CORROSION RESISTANT ALLO 7440-25-7
13463-67-7
7440-33-7
7429-90-5
1333-86-4
7440-47-3
7440-48-4
7440-50-8
1309-37-1
7439-96-5
7439-98-7
7440-02-0
METCO 56C-NS 7440-02-0
SUPER SOLVENT BASE SHAMPOO CONC, 8261 111-76-2
127-18-4
SWEPCO 802 OPEN GEAR LUBE 1338-24-5
75-09-2
74-98-6
106-97-8
SWEPCO 716 ROCK DRILL OIL
SWEPCO 808 PENETRATING OIL 64475-85-0
74-98-6
106-97-8
SWEPCO 718 FIRE RESISTANT HYDRAULIC OIL 107-21-1
SWEPCO 503 GASOLINE & DIESEL FUEL IMPROVER 1330-20-7
71-36-3
98-95-3
SWEPCO 705 HEAVY DUTY CUTTING OIL
SWEPCO 103 MOLY + BARIUM GREASE
ENPLATE PA-491, 3209 7732-18-5
16872-11-0
64-18-6
DEK LUBE COAT, NAPCO 71-55-6
75-45-6
VINYL CHLORIDE 75-01-4
MICROGLASS MILLED FIBER 65997-17-3
LOC-WELD COLD BONDING COMPOUND, 765-1257 (1 7631-86-9
13463-67-7
1317-65-3
7727-43-7
7631-86-9
1332-37-2
1317-65-3
7727-43-7
LOC-WELD COLD BONDING COMPOUND, 765-1263 (1 1317-65-3
7727-43-7
7631-86-9
1332-37-2
1317-65-3
7727-43-7
7631-86-9
13463-67-7
TETRAMETHYLAMMONIUM TRICHLOROTIN (II) 14877-00-0
DIMENSO ONE-COAT ENAMEL GREEN, H61 G 16 64742-47-8
108-88-3
100-41-4
1330-20-7
7439-92-1
R-2560 SILICONE BASE 682-01-9
CUPRO NICKEL 10% 7440-50-8
7440-02-0
1309-37-1
7439-96-5
1313-13-9
OXYGEN FREE ELECTRONIC 7440-50-8
OXYGEN FREE 7440-50-8
1,4-BUTANEDIOL 110-63-4
DIESEL ADDITIVE 1000, 1796PC 27247-96-7
H.S.BAKING GLOSS ENAMEL NON-LEAD COLORS (SU 1330-20-7
64742-95-6
67-63-0
71-36-3
78-83-1
50-00-0
123-86-4
108-65-6
13463-67-7
H.S.BAKING GLOSS ENAMEL NON-LEAD COLORS (SU 1330-20-7
64742-95-6
67-63-0
71-36-3
78-83-1
50-00-0
123-86-4
108-65-6
13463-67-7
H.S.BAKING GLOSS ENAMEL NON-LEAD COLORS (SU 1330-20-7
64742-95-6
67-63-0
71-36-3
78-83-1
50-00-0
123-86-4
108-65-6
13463-67-7
ACRYLIC ENAMEL PRIMER RED OXIDE, E61 R 62 11103-86-9
18540-29-9
64742-47-8
100-41-4
1330-20-7
64742-95-6
13463-67-7
ACRYLIC ENAMEL PRIMER GRAY, E61 A 60 64742-47-8
100-41-4
1330-20-7
64742-95-6
13463-67-7
11103-86-9
18540-29-9
PAINT AND VARNISH REMOVER, 070100 75-09-2
67-56-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net