===================== Product Identification =====================
MSDS NAME:OXYGEN FREE ELECTRONIC
NIIN:00N034996
MSDS Number: BQCCF
=== Responsible Party ===
Company:SMALL TUBE PRODUCTS
Box:1674
City:ALTOONA
State:PA
ZIP:16603
Country:US
Info Phone Num:814-695-4491
Emergency Phone Num:814-695-4491
CAGE:5A727
=== Contractor Identification ===
Company:SMALL TUBE PRODUCTS
Box:City:ALTOONA
State:PA
ZIP:16603
Country:US
Phone:814-695-4491
CAGE:5A727
============= Composition/Information on Ingredients =============
Name:COPPER (SARA III)
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 100%
OSHA PEL:0.1MG/M3 FUME;1 DUST
ACGIH TLV:0.2MG/M3 FUME;1 DUST
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:EFTS OF OVEREXP:TO ABNORMAL UPTAKE AND STORAGE OF CU BY
BODY) MAY INTENSIFY TOXIC EFFECTS IN CHRONIC EXPOSURE (ING 3)
RTECS #:9999999ZZ
Name:ING 2:SITUATIONS. FRAGMENTS OF COPPER METAL/ALLOYS LODGED
IN EYE MAY RESULT IN DISCOLORATION & ABSCESS.
RTECS #:9999999ZZ
Name:OTHER PREC:INVOLVING WELDING, CUTTING, GRINDING, OR
SMELTING OF THIS PRODUCT.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL OF DUST, FUMES/MISTS IS PRIMARY
ROUTE OF EXPOS FOR MOST HLTH EFTS. INGEST RESULTS FROM PULMONARY
CLEARANCE FOLLOWING INHAL & FROM POOR PERS HYGIENE. IRRIT OF EYES,
NASAL MUCOSA, SKIN, UPPER RESP TRACT; METALLIC TASTE, SKIN/HAIR
DISCOLORATION (GREEN); ALLERGIC DERM (RARE); "METAL FUME FEVER"
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:(CHARACTERISTIC INFLUENZA-LIKE SYMP
INCL:FEVER, CHILLS, ACHES, FATIGUE, DRY THROAT, NAUS, & USUALLY
ELEVATED WHITE BLOOD CELL COUNT; ALL OF WHICH ARE RAPIDLY &
COMPLETELY REVERSABLE UPON REMO VAL).INGEST MAY RESULT IN NAUS,
VOM, DIARR, GASTRITIS; "WILSONS DISEASE" (EXTREMELY RARE GENETIC
PREDISPOSITION (ING 2)
Medical Cond Aggravated by Exposure:CHRONIC RESPIRATORY DISEASE, SKIN
DISEASE, AND WILSON'S DISEASE.
======================= First Aid Measures =======================
First Aid:EYE:FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. SKIN:WASH WITH MILD SOAP AND WATER, IF IRRITATION
PERSISTS, GET FOLLOW-UP MEDICAL ATTENTION. INHAL:MOVE PERSON TO
FRESH AIR. PERFORM CPR, IF NECESSARY. INGEST:GIVE LARGE AMOUNTS OF
WATER AND INDUCE VOMITING, IF CONSCIOUS. REFER ACCIDENT VICTIM FOR
MEDICAL ATTENTION FOLLOWING ANY ACCIDENTAL EYE EXPOSURE,
INHALATION, OR INGESTION.
===================== Fire Fighting Measures =====================
Extinguishing Media:USE EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING
FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FINELY DIVIDED DUST IS FLAMMABLE. VAPOR
EXPLOSION MAY RESULT FROM CONTACT OF WATER WITH MOLTEN METAL.
================== Accidental Release Measures ==================
Spill Release Procedures:EVACUATE UPROTECTED PERSONNEL FROM THE
SPILL/RELEASE AREA. VENTILATE THE AREA OF RELEASE. ABSORB LIQUID
(WITH CONTAMINANT) BY USE OF VERMICULITE, DRY SAND, EARTH, OR
SIMILAR MATERIAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT WEAR CONTACT LENSES WHILE
WEARING A RESPIRATOR OR WHEN DUSTS, MISTS, OR FUMES MAY GET INTO
EYES.
Other Precautions:EMPLOYEES DEVEL ANY OF ABOVE CNDTNS SHOULD BE
REFERRED FOR FURTHER MD EVALUATION. DIAGNOSTIC TESTS INCL INCR
URINARY LEVELS OF COPPER/LEUCOCYTOSIS FOR METAL FUME FEVER. ADVERSE
HLTH EFTS FROM OVEREXP ARE PRIMARILY ASSOC W/PROCESS (ING 4)
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL:DESIGN FOR PROCESS, CONC, TOX, AS NEEDED.
SPECIAL:VENT HOT WORK IN CONFINED AREAS. MECH:MAY BE USED (SUPP
DATA)
Protective Gloves:LEATHER WELDING GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WELDING HELMET.
Work Hygienic Practices:GOOD PERSONAL HYGIENE & HOUSEKEEPING PRACTICES
WILL SERVE TO MINIMIZE EXPOS & REDUCE THE SPREAD OF SURFACE CONTAM.
Supplemental Safety and Health
SOL IN H*2O:INSOLUBLE IN WATER. SOLUBLE IN ACIDS. MATLS TO
AVOID:ACETYLENE. CNTCT W/ACIDS MAY LIBERATE FLAMM & EXPLO HYDROGEN
GAS. VENT:DEPENDING ON PROCESS, CONC AND/OR TOX. CONSULT IND. HYG.
OTHER:R EFER TO 29 CFR 1910.94 & .252 (GRINDING, BUFFING,
POLISHING, WELDING, CUTTING, BRAZING RQMTS).
================== Physical/Chemical Properties ==================
HCC:N1
Boiling Pt:B.P. Text:4703F,2595C
Melt/Freeze Pt:M.P/F.P Text:1981F,1083C
Vapor Pres:1.0
Spec Gravity:8.956 (H*2O=1)
Solubility in Water:SUPP DATA
Appearance and Odor:REDDISH, LUSTROUS METAL, NO ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
SOLID COPPER ACETYLIDES WHICH ARE SHOCK SENSITIVE MAY BE FORMED BY
COPPER DUSTS & MISTS IN PRESENCE OF (SUPP DATA)
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CU*2O
==================== Disposal Considerations ====================
Waste Disposal Methods:RECLAIM, IF POSSIBLE. SEAL WASTE IN CONTAINER.
CHECK WITH LOCAL, STATE, AND FEDERAL AUTHORITIES REGARDING LANDFILL
DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
XEROX XD-37 DEVELOPER
| 7439-89-6
9011-14-7
39382-25-7
1333-86-4
9003-07-4 |
|
BITUMASTIC 300M BLACK OR RED (COMPONENT A (
| 8007-45-2
1330-20-7
67-56-1 |
|
VAN STRAATEN 560
| 102-71-6
111-42-2
64742-52-5
107-41-5
141-43-5
68920-70-7 |
|
HYDROXYACETIC ACID 70% SOLUTION, T1004
| 79-14-1
7732-18-5 |
|
SOLDER PASTE WITH WMA-SMQ60 FLUX
| 7440-36-0
7439-92-1
7440-31-5
7440-22-4 |
|
ELEPHANT BLOCKS
| 106-46-7 |
|
CLEANER CL58
| 64742-48-9 |
|
ASPHALT ROOF COATING 454(ASBESTOS-FREE), (S
| 1327-43-1
8032-32-4
8052-41-3
8052-42-4 |
|
HYDRO-SOL DEGREASER CONCENTRATE
| 111-76-2
1344-09-8
26027-38-3
1310-73-2 |
|
KLINGERIT 3 X A
| 12001-29-5 |
|
CEILING TILE ADHESIVE, 1644 785
| 107-21-1
64742-89-8 |
|
FIBER GLASS DUCT SYSTEM
| 65997-17-3
25104-55-6 |
|
ACOUSTILEAD
| 7439-92-1 |
|
WASP & HORNET SPRAY CINCH WHITE, TM-2526
| 8003-34-7
63-25-2
64742-88-7
71-55-6 |
|
ELECTRIC CONTACT CLEANER TM-1568, 78116
| 71-55-6
124-38-9 |
|
ANTI-SEIZE HIGH TEMPERATURE THREAD COMPOUND
| 7440-50-8
7782-42-5 |
|
ANTI-SEIZE HIGH TEMPERATURE THREAD COMPOUND
| 7440-50-8
7782-42-5 |
|
CALUSA HYDROKLEEN--GWC 23-19)
| 25155-30-0
64-17-5
1310-58-3
9016-45-9 |
|
TITANIUM BASE ALLOY
| 7440-32-6
7440-62-2
7440-67-7
7429-90-5
7439-98-7
7440-31-5 |
|
SPECIALTY/STAINLESS STEEL
| 7429-90-5
1333-86-4
7440-47-3
7440-48-4
7440-50-8
1309-37-1
7439-96-5
7439-98-7
7440-02-0
7440-21-3
7446-09-5
13463-67-7
7440-33-7
1314-62-1 |
|
HIGH TEMPERATURE & CORROSION RESISTANT ALLO
| 7440-25-7
13463-67-7
7440-33-7
7429-90-5
1333-86-4
7440-47-3
7440-48-4
7440-50-8
1309-37-1
7439-96-5
7439-98-7
7440-02-0 |
|
METCO 56C-NS
| 7440-02-0 |
|
SUPER SOLVENT BASE SHAMPOO CONC, 8261
| 111-76-2
127-18-4 |
|
SWEPCO 802 OPEN GEAR LUBE
| 1338-24-5
75-09-2
74-98-6
106-97-8 |
|
SWEPCO 716 ROCK DRILL OIL
| |
|
SWEPCO 808 PENETRATING OIL
| 64475-85-0
74-98-6
106-97-8 |
|
SWEPCO 718 FIRE RESISTANT HYDRAULIC OIL
| 107-21-1 |
|
SWEPCO 503 GASOLINE & DIESEL FUEL IMPROVER
| 1330-20-7
71-36-3
98-95-3 |
|
SWEPCO 705 HEAVY DUTY CUTTING OIL
| |
|
SWEPCO 103 MOLY + BARIUM GREASE
| |
|
ENPLATE PA-491, 3209
| 7732-18-5
16872-11-0
64-18-6 |
|
DEK LUBE COAT, NAPCO
| 71-55-6
75-45-6 |
|
VINYL CHLORIDE
| 75-01-4 |
|
MICROGLASS MILLED FIBER
| 65997-17-3 |
|
LOC-WELD COLD BONDING COMPOUND, 765-1257 (1
| 7631-86-9
13463-67-7
1317-65-3
7727-43-7
7631-86-9
1332-37-2
1317-65-3
7727-43-7 |
|
LOC-WELD COLD BONDING COMPOUND, 765-1263 (1
| 1317-65-3
7727-43-7
7631-86-9
1332-37-2
1317-65-3
7727-43-7
7631-86-9
13463-67-7 |
|
TETRAMETHYLAMMONIUM TRICHLOROTIN (II)
| 14877-00-0 |
|
DIMENSO ONE-COAT ENAMEL GREEN, H61 G 16
| 64742-47-8
108-88-3
100-41-4
1330-20-7
7439-92-1 |
|
R-2560 SILICONE BASE
| 682-01-9 |
|
CUPRO NICKEL 10%
| 7440-50-8
7440-02-0
1309-37-1
7439-96-5
1313-13-9 |
|
OXYGEN FREE ELECTRONIC
| 7440-50-8 |
|
OXYGEN FREE
| 7440-50-8 |
|
1,4-BUTANEDIOL
| 110-63-4 |
|
DIESEL ADDITIVE 1000, 1796PC
| 27247-96-7 |
|
H.S.BAKING GLOSS ENAMEL NON-LEAD COLORS (SU
| 1330-20-7
64742-95-6
67-63-0
71-36-3
78-83-1
50-00-0
123-86-4
108-65-6
13463-67-7 |
|
H.S.BAKING GLOSS ENAMEL NON-LEAD COLORS (SU
| 1330-20-7
64742-95-6
67-63-0
71-36-3
78-83-1
50-00-0
123-86-4
108-65-6
13463-67-7 |
|
H.S.BAKING GLOSS ENAMEL NON-LEAD COLORS (SU
| 1330-20-7
64742-95-6
67-63-0
71-36-3
78-83-1
50-00-0
123-86-4
108-65-6
13463-67-7 |
|
ACRYLIC ENAMEL PRIMER RED OXIDE, E61 R 62
| 11103-86-9
18540-29-9
64742-47-8
100-41-4
1330-20-7
64742-95-6
13463-67-7 |
|
ACRYLIC ENAMEL PRIMER GRAY, E61 A 60
| 64742-47-8
100-41-4
1330-20-7
64742-95-6
13463-67-7
11103-86-9
18540-29-9 |
|
PAINT AND VARNISH REMOVER, 070100
| 75-09-2
67-56-1 |
|
|