===================== Product Identification =====================
MSDS NAME:TYPE 7869 DRY SILVER FILM
NIIN:01-221-1384
MSDS Number: BQQPK
=== Responsible Party ===
Company:MINNESOTA MINING AND MANUFACTURING CO
Address:3M CENTER
City:ST. PAUL
State:MN
ZIP:55144-1000
Country:US
Info Phone Num:612-733-1110
Emergency Phone Num:612-733-1110
CAGE:4V902
=== Contractor Identification ===
Company:IMATION ENTERPRISES CORP
Address:1 IMATION PLACE
Box:City:OAKDALE
State:MN
ZIP:55128-3414
Country:US
Phone:888-466-3456
CAGE:39711
Company:MINNESOTA MINING AND MFG CO DIAGNOSTIC IMAGING PRODUCTS
DIV
Address:223-2SW-03 3M CTR
Box:City:SAINT PAUL
State:MN
ZIP:55144-1000
Country:US
Phone:612-733-6785
CAGE:4V902
============= Composition/Information on Ingredients =============
Name:POLYETHYLENE TEREPHTHALATE FILM
CAS:25038-59-9
Fraction by Wt: 80-90%
Name:POLYVINYL BUTYRAL RESIN
CAS:63148-65-2
Fraction by Wt: 3-7%
Name:SILVER BEHENATE
CAS:2489-05-6
Fraction by Wt: 1-5%
Other REC Limits:NONE SPECIFIED
OSHA PEL:0.01 MG/M3 (AG)
ACGIH TLV:0.01 MG/M3 (AG)
Name:CELLULOSE ACETATE
CAS:9004-35-7
Fraction by Wt: 1-3%
Name:SILVER STEARATE
CAS:3507-99-1
Fraction by Wt: 0.5-1.5%
OSHA PEL:0.01 MG AG/M3
ACGIH TLV:0.01 MG AG/M3
Name:MERCURIC BROMIDE
CAS:7789-47-1
RTECS #:OV7415000
Fraction by Wt: <0.1%
Other REC Limits:NONE SPECIFIED
OSHA PEL:S, C, 0.1 MG/M3 (HG)
ACGIH TLV:S, 0.1 MG/M3 (HG)
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THERE ARE NO HEALTH HAZARDS ASSOCIATED
WITH USE OF THIS PRODUCT.
Explanation of Carcinogenicity:NONE OF THE CHEMICALS IN THIS PRODUCT IS
LISTED BY IARC, NTP OR OSHA AS A CARCINOGEN.
Effects of Overexposure:EYE:NOT EXPECTED TO OCCUR DURING NORMAL USE OF
THE PRODUCT. SKIN:NO ADVERSE EFFECTS ARE EXPECTED FROM SKIN CONTACT
WITH THE PRODUCT. IHNALATION EXPOSURE IS NOT EXPECTED TO PRODUCE
ADVERSE HEALTH EFFEC TS. INGESTION IS UNLIKELY.
Medical Cond Aggravated by Exposure:NO INFORMATION GIVEN ON MSDS BY
MFR.
======================= First Aid Measures =======================
First Aid:NO NEED FOR FIRST AID IS ANTICIPATED.
===================== Fire Fighting Measures =====================
Lower Limits:N/D
Upper Limits:N/D
Extinguishing Media:WATER, CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:FOR FIRE INVOLVING SIGNIFICANT AMOUNTS OF THIS
FILM: WEAR SELF-CONTAINED BREATHING APPARATUS (SCBA) AND FULL
PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:NO UNUSUAL FIRE HAZARDS ARE EXPECTED.
================== Accidental Release Measures ==================
Neutralizing Agent:NO INFORMATION GIVEN ON MSDS BY MFR.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL PLACE. HMIS:PROTECT
FROM EXPOSURE TO LIGHT, HEAT, MOISTURE.
Other Precautions:MAINTAIN REGULAR CLEANING OF IMAGING EQUIPMENT BY AN
AUTHORIZED SERVICE TECHNICIAN. PROCESS FILM IN A VENTILATED AREA.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT REQUIRED UNDER NORMAL USE.
Ventilation:USE IN A WELL VENTILATED AREA
Protective Gloves:NITRILE RUBBER GLOVES (FOR CLEANING)
Eye Protection:SAFETY GLASSES OR CHEM SPLASH GOGGLES
Other Protective Equipment:FOR EQUIPMENT CLEANING & SERVICING, USE
NITRILE GLOVES AND OTHER EQUIPMENT AS REQUIRED TO AVOID SKIN
CONTACT W/ RESIDUES
Work Hygienic Practices:MFR: ? HMIS:USE GOOD INDUSTRIAL HYGIENE
PRACTICE. AVOID UNNECESSARY CONTACT. WASH THOROUGHLY BEFORE EATING
OR DRINKING.
Supplemental Safety and Health
KEY2:KT KEEP AWAY FROM HEAT, SPARKS, OPEN FLAME, AND OTHER SOURCES OF
IGNITION.
================== Physical/Chemical Properties ==================
HCC:N1
NRC/State Lic Num:NONE
Solubility in Water:SLIGHT
Appearance and Odor:TRANSPARENT FILM, BLUE TINT, ESSENTIALLLY ODORLESS
Percent Volatiles by Volume:UNKNON
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NO INFORMATION GIVEN ON MSDS BY MFR.
Stability Condition to Avoid:EXPOSURE TO LIGHT, ELEVATED TEMPERATURES,
AND HIGH HUMIDITY PRIOR TO DEVELOPMENT
Hazardous Decomposition Products:CARBON DIOXIDE AND CARBON MONOXIDE,
HYDROCARBONS, SILVER OXIDE AND TRACE LEVELS OF MERCURY OXIDES &
HYDROGEN BROMIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR
==================== Disposal Considerations ====================
Waste Disposal Methods:RECLAMATION OF SILVER AND MERCURY BY A PERMITTED
RECOVERY FACILITY IS PREFERRED. DISPOSAL MUST BE IN ACCORDANCE WITH
ALL APPLICABLE FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|