Search   
MSDS  : CARBON MONOXIDE IN NITROGEN
CAS  : 630-08-0
7727-37-9
NAME  : carbon monoxide
nitrogen
===================== Product Identification =====================

MSDS NAME:CARBON MONOXIDE IN NITROGEN
NIIN:00N036556
MSDS Number: BQRCX
=== Responsible Party ===
Company:SCOTT SPECIALTY GASES
Address:ROUTE 611 NORTH
City:PLUMSTEADVILLE
State:PA
ZIP:18849
Country:US
Info Phone Num:215-766-8861
Emergency Phone Num:215-766-8861
CAGE:51847
=== Contractor Identification ===
Company:SCOTT SPECIALTY GASES
Address:6141 EASTON RD (6141 ROUTE 611)
Box:310
City:PLUMSTEADVILLE
State:PA
ZIP:18934
Country:US
Phone:215-766-8861/ FAX: 215-766-0416
CAGE:51847

============= Composition/Information on Ingredients =============

Name:CARBON MONOXIDE
CAS:630-08-0
RTECS #:FG3500000
OSHA PEL:50 PPM
ACGIH TLV:25 PPM; 9293

Name:NITROGEN
CAS:7727-37-9
RTECS #:QW9700000
ACGIH TLV:SIMPLE ASPHYXIANT

===================== Hazards Identification =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY ACT AS AN ASPHYXIANT BY
DISPLACING AIR NECESSARY FOR LIFE. COLLAPSE AND DEATH MAY OCCUR.
CHRONIC: NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:RAPID RESPIRATION, MUSCULAR INCOORDINATION,
FATIGUE, NAUSEA, AND VOMITING.
Medical Cond Aggravated by Exposure:NONE KNOWN.

======================= First Aid Measures =======================

First Aid:INHALATION: IMMEDIATELY REMOVE VICTIM TO FRESH AIR. IF
BREATHING HAS STOPPED, GIVE ARTIFICIAL RESPIRATION. IF BREATHING IS
DIFFICULT, GIVE OXYGEN. GET IMMEDIATE MEDICAL ATTENTION. INGESTION:
CALL MD I MMEDIATELY . SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER .
EYE: FLUSH WITH WATER FOR AT LEAST 15 MINUTES .

===================== Fire Fighting Measures =====================

Flash Point:NONE
Extinguishing Media:USE WHAT IS APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
CYLINDERS EXPOS TO FIRE SHOULD BE COOLED W/WATER SPRAY. MOVE
CYLINDER FROM FIRE IF THIS CAN BE DONE SAFELY.
Unusual Fire/Explosion Hazard:DO NOT EXPOSURE TO HEAT OR FLAMES.
CONTAINER RUPTURE MAY OCCUR UNDER FIRE CONDITIONS.

================== Accidental Release Measures ==================

Spill Release Procedures:EVACUATE AND VENTILATE AREA. REMOVE LEAKING
CYLINDER TO EXHAUST HOOD OR SAFE OUTDOORS AREA IF THIS CAN BE DONE
SAFELY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

====================== Handling and Storage ======================

Handling and Storage Precautions:STORE IN WELL VENTILATED AREAS ONLY.
KEEP VALVE PROTECTION CAP ON CYLINDERS WHEN NOT IN USE AND SECURE
CYLINDER WHEN USING TO PROTECT FROM FALLING.
Other Precautions:USE SUITABLE HAND TRUCK TO MOVE CYLINDERS. PROT
CNTNRS FROM PHYS DMG. DO NOT DEFACE CYLINDERS/LBLS. MOVE CYLINDER
W/ADEQ HAND TRUCK. CYLINDER SHOULD BE REFILLED BY QUALIFIED PRDCERS
OF COMPRESSED GASE S.SHIPMENT OF COMPRESSED GAS (SUPP DATA)

============= Exposure Controls/Personal Protection =============

Respiratory Protection:USE A NIOSH/MSHA APPROVED SELF-CONTAINED
BREATHING APPARATUS IN CASE OF EMERGENCY OR NON-ROUTINE USE.
Ventilation:PROVIDE ADEQUATE GENERAL AND LOCAL EXHAUST VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR SAFETY SHOES WHEN HANDLING CYLINDERS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
WASTE DISPOSAL METHOD: PROTECTION CAP IN PLACE.DISPOSE OF I/A/W LOCAL,
STATE AND FEDERAL REGULATIONS . OTHER PRECAUTIONS: CYLINDER WHICH
HAS NOT BEEN FILLED BY OWNER OR WITH HIS WRITTEN CONSENT IS A
VIOLATION OF FEDERAL LAW (49 CFR).

================== Physical/Chemical Properties ==================

HCC:G8
Vapor Density:0.967
Solubility in Water:0.0149 @ 25C V/V
Appearance and Odor:COLORLESS ODORLESS GAS.

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
NITROGEN REACTS WITH LI, ND, AND TI AT HIGH TEMPERATURES.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:NONE.

==================== Disposal Considerations ====================

Waste Disposal Methods:ALLOW GAS TO DISCHARGE AT SLOW RATE. WASTE
CARBON MONOXIDE CAN BE PIPED TO AN APPRVD INCIN TO BURN CARBON
MONOXIDE TO CARBON DIOXIDE UNDER CNTRLD CNDTNS. RETURN CYLINDERS TO
SUPP FOR PROPER DISP W/ANY VALVE OUTLET PLUGS/CAPS SECURED & VALVE
(SUPDAT)

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
FOOTHOLD-GREY, DL2440 64641-92-0
61788-76-9
1330-20-7
1317-65-3
SUPER SIDEWINDER, DH6005
PRO TRUCKER, DL1500 64742-94-5
64742-94-5
72245-28-6
64742-06-9
24937-78-8
64741-88-4
2,2-DIMETHOXYPROPANE 98%, D13680-8 77-76-9
INTERZINC 22 RED SILICATE BASE, 2410 64742-95-6
110-80-5
78-10-4
QUALITEK 303 FLUX 67-63-0
QUALITEK 305 FLUX 67-63-0
QUALITEK 307 FLUX 67-63-0
DRIVE HERBICIDE 50 WP, 548507 84087-01-4
FLEXCO PART A 76 EPOXY ADHESIVE 84-74-2
25068-38-6
FLEXCO PART B 76 EPOXY ADHESIVE 68082-29-1
112-24-3
141-43-5
67-63-0
AMJET 300 WASH 67-56-1
78-93-3
TRIETHYL ORTHOPROPIONATE 97%, T6060-7 115-80-0
TURBO T OIL 220, 65609 64742-70-7
64742-54-7
64742-57-0
92-009 DISPERSION COATING 64742-89-8
2224-33-1
68909-20-6
69430-24-6
70131-67-8
SIPONIC 218, 150401 9004-83-5
NEUTRAMEEN NA-9 100-37-8
TCM68 CLEAR TONER 64742-48-9
1001 VAPOR BARRIER 75-35-4
107-21-1
111-46-6
LIQUID SULFUR DIOXIDE OR SULFUR DIOXIDE 7446-09-5
SHOE POLISH 8052-41-3
64741-41-9
495-54-5
509-34-2
95-63-6
MULTISOLVE 35 (AEROSOL), TX132 1717-00-6
67-63-0
67-56-1
75-52-5
124-38-9
957 COMPOUND HOT VAT STRIP 1310-73-2
1319-77-3
FRE-THIN THINNER 67-56-1
67-63-0
108-88-3
123-86-4
HPS ADHESIVE HIGH PRESSURE SEALANT, 121700 14808-60-7
64742-89-8
SOLVO RUST SUPER PENETRATING OIL, 81252 8008-20-6
8052-41-3
75-28-5
74-98-6
111-76-2
CATHA COAT 304 LIQUID PORTION PART A, MD305 107-98-2
1330-20-7
37300-23-5
90-72-2
1332-58-7
64-17-5
78-10-4
CATHA COAT 304 POWDER PORTION PART B, MD305 7440-66-6
422 MARINE SPAR VARNISH
68-SX-87 EPOXY REPAIR, 06887 90-72-2
25068-38-6
DELTA SOLDER PASTE SN 63 ALLOY TYPE 650 7440-31-5
7439-92-1
65997-05-9
DEX-O-TEX P-61 PASTE, 1119
DEX-O-TEX P-61 PASTE, 1120
DEX-O-TEX P-61 PASTE, 1121
DEX-O-TEX P-61 PASTE, 1122
WRITE-OFF, 0566 108-65-6
138-86-3
1119-40-0
61790-63-4
141-43-5
1310-58-3
64742-94-5
111-76-2
DE-BUG AEROSOL, 5090 115-10-6
64-17-5
2921-35-2
PR-1141 PC-2 (DARK GRAY), PART A 1333-86-4
PR-1141 PC-1 TO PC-49 COLORS, PART B 108-65-6
55636-48-1
4098-71-9
64742-47-8
SPECTRUM DIAMOND COMPOUND
LDC-4702 SILVER STRIKE 7732-18-5
151-50-8
506-61-6
PR-1141 PC-57 BRICK RED, PART A 110-43-0
1309-37-1
68611-44-9
38499-32-1
10101-39-0
PENETRATING OIL STAIN CLEAR BASE, 28-012 8052-41-3
LAYOUT BROWN DX-257 (TRANSPARENT SERIES) 71077-14-0
1328-51-4
123-86-4
64-17-5
71-36-3
9004-70-0
67-63-0
PLASMA QUENCH 617 7631-99-4
HIR IN 0.187 INCH THICKNESS AND GREATER & T
CARBON MONOXIDE IN NITROGEN 630-08-0
7727-37-9
ARCTIC BAN 57-55-6
141-78-6
64-17-5
7732-18-5
PH ADJUSTER 533-96-0
TIMBERTONE ALKYD WOOD STAIN, 57-0 8052-41-3
64742-88-7
64742-95-6

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net