===================== Product Identification =====================
MSDS NAME:SBR-100 WINDOW & SIDING CAULK
NIIN:00F028366
MSDS Number: BRBXM
=== Responsible Party ===
Company:OHIO SEALANTS INC
Address:7405 PRODUCTION DRIVE
City:MENTOR
State:OH
ZIP:44060
Country:US
Info Phone Num:216-255-8900
Emergency Phone Num:800-424-9300
Preparer's Name:DEBI FELLOWS
CAGE:OHIOS
=== Contractor Identification ===
Company:OHIO SEALANTS INC
Address:7405 PRODUCTION DRIVE
City:MENTOR
State:OH
ZIP:44060
Country:US
Phone:216-255-8900;800-321-3578
CAGE:OHIOS
============= Composition/Information on Ingredients =============
Name:TITANIUM DIOXIDE, TIO2
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: <5%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST; 9293
Name:ISOPARAFFINIC HYDROCARBONS (NAPHTHA PETROLEUM),
HYDROTREATED HEAVY, NON AROMATIC HEAVY NAPHTHA) ISOPAR G *93-1*
CAS:64742-48-9
Fraction by Wt: 30%
OSHA PEL:100
ACGIH TLV:100
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITANT, REDNESS, TEARING, &
BLURRED VISION. INHALATION: RESPIRATORY, NOSE, THROAT, & LUNG
IRRITANT. INGESTION: GASTROINTESTINAL IRRITANT, NAUSEA, VOMITING, &
DIARRHEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: MODERATE IRRITATION, DEFATTING, &
DERMATITIS. INHALATION: HEADACHE, DIZZINESS, & FATIGUE. HIGH
CONCENTRATIONS OF VAPORS ARE ANESTHETIC & MAY HAVE OTHER CENTRAL
NERVOUS SYSTEM EFFECTS.
======================= First Aid Measures =======================
Eyes: FLUSH W/LARGE AMOUNTS OF WATER FOR AT LEAST 15 MINUTES
LIFTING EYELIDS OCCASIONALLY. SKIN: WASH THOROUGHLY W/SOAP & WATER,
APPLY A MILD SKIN CREAM. INHALATION: REMOVE TO FRESH AIR, IF
BREATHING IS DIFFICULT, ADMINISTER OXYGEN. IF BREATHING HAS
STOPPED, GIVE ARTIFICIAL RESPIRATON. INGESTION: DO NOT INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:105F
Lower Limits:0.9%
Upper Limits:6%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, USE WATER TO COOL MATERIAL
IN VICINITY OF FIRE
Fire Fighting Procedures:USE SCBA W/FULL FACEPIECE OPERATED IN PRESSURE
DEMAND OR OTHER POSITIVE PRESSURE MODE. WATER MAY BE UNSUITABLE
EXCEPT ASA COOLING AGENT, USE FOG NOZZLE.
Unusual Fire/Explosion Hazard:ANY CLOSED CONTAINER MAY RUPTURE WHEN
EXPOSED EXTREME HEAT.
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. VENTILATE
CONFINED AREAS (OPEN WINDOWS & DOORS). SCOOP INTO SEALABLE SAFETY
CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARK, & FLAME.
KEEP OUT OF REACH OF CHILDREN. KEEP CONTAINER CLOSED WHEN NOT IN
USE.
Other Precautions:DON'T CUT OR BURN RECEPTICALS THAT HAVE CONTAINED A
SLVENT-BASED PRODUCT. DON'T REUSE THIS CONTAINER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF TLV OF THE PRODUCT IS EXCEEDED, A NIOSH/MSHA
JOINTLY APPROVED AIR SUPPLY RESPIRATOR IS ADVISED IN THE ABSCENCE
OF PROPER VENTILATION. OSHA REGULATIONS ALSO PERMIT THE USE OF
OTHER TYPES OF NIOSH/MS HA RESPIRATORS UNDER SPECIFIED CONDITION
Ventilation:SUFFICIENT MECHANICAL (GENERAL/LOCAL EXHAUST) VENTILATION
TO KEEP BELOW TLV DURING APPLICATION & CURING OF PRODUCT.
Protective Gloves:RUBBER
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:CHEMICAL APRON MAY BE WORN.
Supplemental Safety and Health
TITANIUM DIOXIDE IN WHITE ONLY. THE MAIN HAZARD OF TITANIUM DIOXIDE IS
IN INHALATION. DUE TO IT'S INCORPORATION INTO THE POLYMER MATRIX,
EXPOSURE BY INHALATION IS UNLIKELY.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:310F
Vapor Density:>1
Evaporation Rate & Reference:(N-BU AC=1): 0.08
Appearance and Odor:NON-SAG,PASTE-LIKE CHAULK, MILD MINERAL SPIRITS
ODOR, SEMISLOID, SOLVENT
Percent Volatiles by Volume:49.3
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS: CHLORINE, NITRIC ACID, & HYPOCHLORITES.
Hazardous Decomposition Products:FUMES & SMOKE CONTAINING CO2 & O2
UNDER FIRE CONDITIONS.
Conditions to Avoid Polymerization:HEAT, SPARK, & OPEN FLAME.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IAW LOCAL, STATE, & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|