| MSDS | : | 2,5-DIAMINOBENZENESULFONIC ACID, TECH, 90%, | | CAS | : | 88-45-9 | | NAME | : | benzene sulfonic acid, 2,5-diamino-; (2,5-diaminobenzene
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:2,5-DIAMINOBENZENESULFONIC ACID, TECH, 90%,
NIIN:00N041641
MSDS Number: BRLPP
=== Responsible Party ===
Company:ALDRICH CHEMICAL CO
Box:355
City:MILWAUKEE
State:WI
ZIP:53201
Country:US
Info Phone Num:414-273-3850
Emergency Phone Num:414-273-3850
CAGE:60928
=== Contractor Identification ===
Company:ALDRICH CHEMICAL CO INC
Address:1001 WEST ST PAUL AVE
Box:355
City:MILWAUKEE
State:WI
ZIP:53233
Country:US
Phone:414-273-3850
CAGE:60928
============= Composition/Information on Ingredients =============
Name:BENZENE SULFONIC ACID, 2,5-DIAMINO-; (2,5-DIAMINOBENZENE
SULFONIC ACID, TECH)
CAS:88-45-9
RTECS #:DB5900100
Fraction by Wt: 90%
OSHA PEL:N/K .
ACGIH TLV:N/K .
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: HARMFUL IF SWALLOWED, INHALED,
OR ABSORBED THRU SKIN. MATERIAL IS EXTREMELY DESTRUCTIVE TO TISSUE
OF MUCOUS MEMBRANES AND UPPER RESPIRATORY TRACT, EYES & SKIN. INHAL
MAY BE FATAL AS A RESULT OF SPASM, INFLAMM & EDEMA OF LARYNX &
BRONCHI, CHEM PNEUM & PULM EDEMA. SYMPS OF EXPOS MAY INCLUDE (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: BURNING SENSATION, COUGHING,
WHEEZING, LARYNGITIS, SHORTNESS OF BREATH, HEADACHE, NAUSEA AND
VOMITING. TO THE BEST OF MFR KNOWLEDGE, THE CHEMICAL, PHYSICAL, AND
TOXICOLOGICAL PROPERTIES HAVE NOT BEEN THOROUGHLY INVESTIGATED.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
Eyes: IMMED FLUSH W/COPIOUS AMTS OF WATER FOR @ LST 15 MIN &
SEEK MED ADVICE. ASSURE ADEQ FLUSHING OF EYES BY SEPARATING LIDS
W/FINGERS. SKIN: IMMED FLUSH W/COPIOUS AMTS OF WATER FOR @ LST 15
MIN WHIL E REMOVING CONTAMD CLTHG & SHOES. WASH CONTAMD CLTHG
BEFORE REUSE. DISCARD CONTAMD SHOES. INHAL: REMOVE TO FRESH AIR. IF
NOT BRTHG GIVE ARTF RESP. IF BRTHG IS DFCLT, GIVE OXYGEN. INGEST:
(SUPP DATA)
===================== Fire Fighting Measures =====================
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL POWDER OR APPROPRIATE
FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.
================== Accidental Release Measures ==================
Spill Release Procedures:EVAC AREA. WEAR NIOSH/MSHA APPROVED SCBA,
RUBBER BOOTS & HEAVY RUBBER GLOVES. COVER W/DRY LIME/SODA ASH, PICK
UP, KEEP IN A CLOSED CONTAINER & HOLD FOR WASTE DISP. VENT AREA AND
WASH SPILL SITE AFTER MATERIAL PICKUP IS COMPLETE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:DO NOT BREATHE DUST. DO NOT GET IN
EYES, ON SKIN/CLTHG. AVOID PRLNGD/RPTD EXPOS. CORROSIVE. KEEP
TIGHTLY CLOSED. STORE IN A COOL DRY PLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:USE ONLY IN A CHEMICAL FUME HOOD.
Protective Gloves:CHEMICAL-RESISTANT GLOVES.
Eye Protection:CHEM WORK GOG W/8" MIN FSHLD .
Other Protective Equipment:OTHER PROTECTIVE CLOTHING, SAFETY SHOWER AND
EYE BATH.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
FIRST AID PROC: WASH OUT MOUTH W/WATER PROVIDED PERSON IS CONSCIOUS.
CALL A PHYSICIAN.
================== Physical/Chemical Properties ==================
Melt/Freeze Pt:M.P/F.P Text:>568F,>298C
Appearance and Odor:VIOLET POWDER
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES OF: CARBON MONOXIDE,
CARBON DIOXIDE, NITROGEN OXIDES, SULFUR OXIDES.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISSOLVE/MIX MATERIAL WITH A COMBUSTIBLE SOLVENT
AND BURN IN A CHEMICAL INCINERATOR EQUIPPED WITH AN AFTERBURNER AND
SCRUBBER. DISPOSE OF I/A/W FEDERAL, STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
BLEACH 5 1/4%
| 7681-52-9
1310-73-2 |
|
INTERLAC TEAK FINISH, CLM231
| 1330-20-7
110-80-5
64742-95-6
8032-32-4
64742-94-5
67-63-0 |
|
CLEAR, 10509
| 64-19-7
124-17-4
2807-30-9 |
|
SAFETY YELLOW, 10502
| 2807-30-9
64-19-7
124-17-4 |
|
ROYAL BLUE, 10510
| 2807-30-9
64-19-7
124-17-4 |
|
NITRITE ION STANDARD, 37021
| 7732-18-5 |
|
NITRITE ION STANDARD, 37022
| 7732-18-5 |
|
NITRITE ION STANDARD, 470012
| 7732-18-5 |
|
UV-400, 506-135
| 131-55-5 |
|
THULIUM OXIDE (ALL GRADES >99%), 2971002K
| 12036-44-1 |
|
THULIUM OXIDE (ALL GRADES >99%), 9531015K
| 12036-44-1 |
|
COLORPASTE-MING ORANGE, 81095
| 61788-76-9 |
|
COLORPASTE-MING ORANGE, 84095
| 61788-76-9 |
|
E-Z MURIATIC ACID
| 7647-01-0 |
|
STEAMETTE
| 111-76-2 |
|
WATERMARK NEUTRALIZING SOLUTION, 1614
| 67-56-1
7732-18-5 |
|
WATER REDUCIBLE SEMIGLOSS EXTERIOR INTERIOR
| 13463-67-7
1317-65-3
112945-52-5
50-00-0
108-05-4
97553-90-7 |
|
LATEX CORROSION RESISTANT PRIMER FOR METAL
| 50-00-0
108-05-4
97553-90-7
13983-17-0
13463-67-7
13983-17-0
112945-52-5 |
|
OLD HARD ADH REMOVER
| 75-09-2
107-98-2
64742-80-9 |
|
TITANIUM ACTIVATOR
| |
|
PURE TEK 5555, 115120
| 141-43-5 |
|
VECTOBAC (R)-AS POTENCY IS 600 ITU/MG (SUPP
| |
|
AMMONIUM TARTRATE, 0810
| 3164-29-2 |
|
AURINTRICARBOXYLIC ACID, TRIAMMONIUM SALT,
| 569-58-4 |
|
NINHYDRIN, MONOHYDRATE, N862
| 485-47-2 |
|
M-CRESOL, F842
| 108-39-4 |
|
LEAD CHROMATE, 2314
| 7758-97-6 |
|
1,4-BUTANEDIOL, 99%,88480-7
| 110-63-4 |
|
2,5-DIAMINOBENZENESULFONIC ACID, TECH, 90%,
| 88-45-9 |
|
POLACOTE FFP-RESIN PART A
| |
|
POLACOT FFP - HARDENER PART B
| 68410-23-1 |
|
POLAPRIME 21
| 13463-67-7
64742-95-6 |
|
GLYCINE, 99+%, 24126-1
| 56-40-6 |
|
(1,3-BIS(DIPHENYLPHOSPHINO)PROPANE)-NICKEL
| 15629-92-2 |
|
(1,2-BIS(DIPHENYLPHOSPHINO)ETHANE)-NICKEL (
| 14647-23-5 |
|
BROMINE, 99.5+%, ACS REAGENT, 27757-6
| 7726-95-6 |
|
2,5-DIAMINOBENZENESULFONIC ACID TECH 90%, 1
| 88-45-9 |
|
CONSUME
| |
|
ORANGE TOUGH 40
| 5989-27-5
111-90-0 |
|
SILICONE ALKYD ALUM COMPLIANT SILICONE (SUP
| 64741-41-9
108-10-1
110-43-0
123-86-4
57-11-4 |
|
MASTERS CHOICE METAL REROOF, WB-003
| 111-76-2
25265-77-4 |
|
POLYBLEND GROUT, PBB
| 14808-60-7
65997-15-1 |
|
NEOVAC SY
| |
|
EPOXICAL 415 SURFACE COAT HARDENER
| 111-40-0
68910-93-0
107-21-1 |
|
DRY AEROSOL-SPRING GREEN/FRESH AIR
| 68476-86-8 |
|
ROSS WHITE GLUE
| |
|
ROSS GLITTER COLORS
| |
|
FLAME CONTROL NO 500 SERIES INDUSTRIAL HEAT
| 1330-20-7
64742-89-8
108-88-3
64742-95-6
14807-96-6 |
|
FLAME CONTROL NO 500 SERIES INDUSTRIAL HEAT
| 1330-20-7
1317-80-2 |
|
LB-020
| 108-88-3
67-64-1
78-93-3 |
|
|