LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: MINOR IRRITATION; MAY BE A
SENSITIZER. EYES: MINOR EYE IRRITANT. INGEST: HARMFUL IF SWALLOWED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:SKIN: WASH WITH WARM SOAPY WATER. EYES: FLUSH WITH CLEAR
WATER FOR AT LEAST 15 MINS & SEEK IMMED MED ATTN. INHAL: REMOVE
VICTIM TO FRESH AIR. INGEST: SEEK IMMEDIATE MED ATTN.
===================== Fire Fighting Measures =====================
Flash Point Method:TOC
Flash Point:400F,204C
Extinguishing Media:CO*2 OR DRY CHEMICALS; POLYMER FOAMS FOR LARGE
FIRES.
Fire Fighting Procedures:AVOID BREATHING SMOKE. WEAR NIOSH/MSHA
APPROVED SCBA & FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE.
Spill Release Procedures:AVOID SKIN CONTACT. ABSORB WITH SWEEPING
COMPOUND OR OTHER ABSORBENT MATERIAL AND DISPOSE OF.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:USE WITH ADEQUATE VENTILATION. AVOID
SKIN CONTACT. STORE IN A COOL, DRY PLACE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Respiratory Protection:NONE IN NORMAL USE. NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST WHEN USED W/HARDENER.
Protective Gloves:RUBBER/DISPOSABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:COVERALLS.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Vapor Density:NIL
Spec Gravity:2.04(H*2O=)
Solubility in Water:NIL
Appearance and Odor:TAN PASTE WITH LOW ODOR.
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HEAT GENERATED WHEN MIXED W/EPOXY
HARDENER. USE CAUTION WHEN MIXING LARGE QTYS. AVOID OPEN FLAME OR
EXCESSIVE HEAT.
Hazardous Decomposition Products:OXIDES OF CARBON, NITROGEN, ALDEHYDES
AND ACIDS.
Waste Disposal Methods:IN ACCORDANCE WITH LOCAL, STATE & FEDERAL
GUIDELINES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.