aluminum (powder) antimony red iron oxide/iron (iii) oxide/ferric oxide/yellow ferric lead, inorganic lead (suspected human carcinogen by iarc, zinc oxide red iron oxide/iron (iii) oxide/ferric oxide/yellow ferric
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:IRRITATION TO EYES, NOSE & THROAT.
METAL FUME FEVER. ALUMINUM-FIBROSIS. IRON: SIDEROSIS. LEAD:
ANEMIA/URINARY/NERVE DYSFUNCTION.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:TYPICAL SYMPTOMS LAST FROM 12 TO 48 HOURS &
CONSIST OF METALLIC TASTE IN MOUTH/DRYNESS & IRRITATION OF
THROAT/CHILLS/FEVER. LEAD: WEAKNESS/CONSTIPATION/NAUSEA.
Medical Cond Aggravated by Exposure:CHRONIC RESPIRATORY DISORDERS
(ASTHMA, CHRONIC BRONCHITIS, EMPHYSEMA)
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH THOROUGHLY
W/WATER TO REMOVE PARTICULATE. SKIN: REMOVE PARTICLES BY WASHING
THOROUGHLY W/SOAP & WATER. INGESTION: OBTAIN MEDICAL ATTENTION IN
ALL CASES.
===================== Fire Fighting Measures =====================
Extinguishing Media:FOR MOLTEN METAL USE DRY POWDER OR SAND. DONT' USE
WATER ON MOLTEN METAL.
Unusual Fire/Explosion Hazard:FINE METAL PARTICLES SUCH AS PRODUCED IN
GRINDING/SAWING CAN BURN. HIGH CONCENTRATIONS OF METALLIC FINES IN
THE AIR MAY PRESENT AN EXPLOSION HAZARD.
Spill Release Procedures:FINE TURNINGS & SMALL CHIPS SHOULD BE SWEPT OR
VACUUMED. SCRAP METAL CAN BE RECLAIMED FOR RE-USE.
====================== Handling and Storage ======================
Handling and Storage Precautions:ARC OR SPARK GENERATED WHEN WELDING OR
BURNING COULD BE A SOURCE OF IGNITION FOR COMBUSTION & FLAMMABLE
MATERIAL.
Other Precautions:METALLIC DUST OR FUMES MAY BE PRODUCED DURING
WELDING, BURNING, GRINDING, & POSSIBLE MACHINING. AVOID GENERATION
OF AIRBORNE FUME & DUST.
Respiratory Protection:APPROPRIATE DUST/MIST/FUME RESPIRATOR SHOULD BE
USED TO AVOID EXCESSIVE INHALATION OF PARTICULATES. IF EXPOSURE
LIMITS ARE REACHED OR EXCEEDED, USE NIOSH APPROVED EQUIPMENT.
Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GLASSES, FACE SHIELDS
Other Protective Equipment:AS REQUIRED
Supplemental Safety and Health
MELTING POINT BASE METAL: 2800F. MELTING POINT METALLIC COATING: 800F.
STEEL PRODUCTS IN THEIR SOLID STATE PRESENT NO HEALTH HAZARD.
OPERATIONS SUCH AS BURNING/WELDING/SAWING/BRAZING/GRINDING/MACHING
/RESULTING IN THE GENERATION OF AIRBRONE PARTICULATES MAY PRESENT
HAZARDS.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS
Stability Condition to Avoid:TEMPS GREATER THAN MELTING POINT
Hazardous Decomposition Products:HYDROGEN GAS, OXIDES OF IRON &
ALLOYING ELEMENTS
Waste Disposal Methods:USED OF UNUSED PRODUCT SHOULD BE DISPOSED OF IN
ACCORDANCE W/FEDERAL/STATE/LOCAL LAWS & REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.