| MSDS | : | ALUMINUM ALLOY | | CAS | : | 7429-90-5
7440-69-9
7440-42-8
7440-47-3
7440-48-4
7440-50-8
7439-89-6
7439-92-1
1309-48-4
7439-96-5
7440-02-0
10102-43-9
10102-44-0
10028-15-6
7440-21-3
7440-31-5
7440-32-6
7440-62-2
1314-13-2 | | NAME | : | aluminum (powder)
bismuth
boron
chromium metal, chromium, chrome (suspected a1 human
cobalt
copper (dust & mist), bronze powder
iron
lead, inorganic lead (suspected human carcinogen by iarc,
magnesium oxide, magnesia
manganese, mn compounds
nickel (soluble) (suspected human carcinogen by ntp, iarc,
nitric, nitric oxide
nitrogen dioxide
ozone
silicon
tin (as sn)
titanium (dry powder) (ti)
vanadium
zinc oxide
|
| |
|
|
===================== Product Identification =====================
MSDS NAME:ALUMINUM ALLOY
NIIN:00F030558
MSDS Number: BSLGW
=== Responsible Party ===
Company:RELIANCE STEEL & ALUMINUM CO
Address:2550 E 25TH ST
City:LOS ANGELES
State:CA
ZIP:90058
Country:US
Info Phone Num:213-582-2272
Emergency Phone Num:213-582-2272
CAGE:6D677
=== Contractor Identification ===
Company:RELIANCE STEEL & ALUMINUM CO
Address:2550 E 25TH ST
Box:City:LOS ANGELES
State:CA
ZIP:90058
Country:US
Phone:213-582-2272
CAGE:6D677
============= Composition/Information on Ingredients =============
Name:ALUMINUM (POWDER)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: 83-99.7%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM (DUST)
Name:BISMUTH
CAS:7440-69-9
RTECS #:EB2600000
Fraction by Wt: 0.4-0.7%
ACGIH TLV:10 MG/CUM
Name:BORON
CAS:7440-42-8
RTECS #:ED7350000
Fraction by Wt: 0.06%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM
Name:CHROMIUM METAL, CHROMIUM, CHROME (SUSPECTED A1 HUMAN
CARCINOGEN BY IARC, NTP & ACGIH)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 0.01-.4%
OSHA PEL:1 MG/CUM
ACGIH TLV:0.5 MG/CUM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:COBALT
CAS:7440-48-4
RTECS #:GF8750000
Fraction by Wt: 1-10%
Other REC Limits:0.05 PPM
OSHA PEL:0.1 MG/CUM
ACGIH TLV:0.05 MG/CUM
Name:COPPER (DUST & MIST), BRONZE POWDER
CAS:7440-50-8
RTECS #:GL5325000
Fraction by Wt: 0.05-6%
Other REC Limits:1 MG(CU)/M3 (DUST)
OSHA PEL:0.1 MG(CU)/M3 (FUME)
ACGIH TLV:0.2 MG/M3 (FUME)
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: 0.35-1%
OSHA PEL:10 MG/CUM
ACGIH TLV:5 MG/CUM
Name:LEAD, INORGANIC LEAD (SUSPECTED HUMAN CARCINOGEN BY IARC,
NTP & ACGIH)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 0.4-0.7%
OSHA PEL:0.05 MG/CUM
ACGIH TLV:0.15 MG/CUM
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:MAGNESIUM OXIDE, MAGNESIA
CAS:1309-48-4
RTECS #:OM3850000
Fraction by Wt: .03-4.9%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM
Name:MANGANESE, MN COMPOUNDS
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: .02-1.5%
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM (DUST)
Name:NICKEL (SOLUBLE) (SUSPECTED HUMAN CARCINOGEN BY NTP, IARC,
ACGIH) INTENDED CHANGE (IC)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 0.3%
Other REC Limits:1 MG/CUM
OSHA PEL:1 MG/CUM
ACGIH TLV:0.05 MG/CUM IC
Name:NITRIC, NITRIC OXIDE
CAS:10102-43-9
RTECS #:QX0525000
Other REC Limits:25 PPM
OSHA PEL:30 MG/CUM
ACGIH TLV:30 MG/CUM
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS
Name:NITROGEN DIOXIDE
CAS:10102-44-0
RTECS #:QW9800000
Other REC Limits:3 PPM
OSHA PEL:9 MG/CUM
ACGIH TLV:1.8 MG/CUM
EPA Rpt Qty:10 LBS
DOT Rpt Qty:10 LBS
Name:OZONE
CAS:10028-15-6
RTECS #:RS8225000
Other REC Limits:0.1 PPM
OSHA PEL:0.2 MG/CUM
ACGIH TLV:V 0.20 MG/CUM
Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: .25-1.2%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM
Name:TIN (AS SN)
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: 1-10%
OSHA PEL:2 MG/CUM
ACGIH TLV:2.0 MG/CUM
Name:TITANIUM (DRY POWDER) (TI)
CAS:7440-32-6
RTECS #:XR1700000
Fraction by Wt: 0.02-.2%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM
Name:VANADIUM
CAS:7440-62-2
RTECS #:YW1355000
Fraction by Wt: 0.05%
Other REC Limits:0.1 MG/CUM
OSHA PEL:0.05 MG/CUM
ACGIH TLV:0.05 MG/CUM
Name:ZINC OXIDE
CAS:1314-13-2
RTECS #:ZH4810000
Fraction by Wt: .05-6.1%
OSHA PEL:5 MG/CUM
ACGIH TLV:5 MG/CUM FUME
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:OVEREXPOSURE TO LEAD FUMES OVER AN
EXTENDED PERIOD OF TIME CAN RESULT IN SUCH TOXIC EFFECTS AS CENTRAL
NERVOUS SYSTEM DISTURBANCES, RENAL CHANGES, PERIPHERAL NEUROPATHY,
GASTROINTESTINAL DISTURBANCE, ANEMIA, & CHROMOSOMAL CHANGES. OIL
VAPORS MAY CAUSE IRRITATION OF EYES/UPPER RESPIRATORY TRACT/SKIN
IRRITATION.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:BURNS CAN RESULT, IF METAL IS HOT & TOUCHED.
======================= First Aid Measures =======================
First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH THOROUGHLY
W/WATER TO REMOVE PARTICULATE. SKIN: REMOVE PARTICLES BY WASHING
THOROUGHLY W/SOAP & WATER. INGESTION: OBTAIN MEDICAL ATTENTION IN
ALL CASES.
===================== Fire Fighting Measures =====================
Extinguishing Media:FOR MOLTEN ALUMINUM USE DRY POWDER OR SAND. DON'T
USE WATER OR HALOGEN AGENTS ON MOLTEN ALUMINUM.
Unusual Fire/Explosion Hazard:DAMP ALUMINUM DUST MAY SPONTANEOUSLY HEAT
W/LIBERATION OF HYDROGEN TO FORM EXPLOSIVE AIR MIXTURES. FINELY
DIVIDED ALUMINUM WILL FORM EXPLOSIVE MIXTURES IN/AIR.
================== Accidental Release Measures ==================
Spill Release Procedures:FINE TURNINGS & SMALL CHIPS SHOULD BE SWEPT OR
VACUUMED. SCRAP METAL CAN BE RECLAIMED FOR REUSE.
====================== Handling and Storage ======================
Handling and Storage Precautions:MOISTURE MUST BE DRIVEN OFF PRIOR TO
REMELTING. DON'T TOUCH CAST ALUMINUM METAL/HEATED ALUMINUM.
Other Precautions:SOME ALUMINUM SCRAP MAY BE CONTAMINATED W/OIL AT
LEVELS AT >1%. VAPOR DEGREASER MUST BE PROPERLY MAINTAINED TO LIMIT
THE ACCUMULATION OF ALUMINUM FINES. REMELTING SCRAP IN THE PRESENCE
OF MOISTURE/STR ONG OXIDIZERS COULD CAUSE AN EXPLOSION.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:APPROPRIATE DUST/MIST/FUME RESPIRATOR SHOULD BE
USED TO AVOID EXCESSIVE INHALATION OF PARTICULATES. IF EXPOSURE
LIMITS ARE REACHED OR EXCEEDED, USE NIOSH APPROVED EQUIPMENT.
Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GLASSES & FACE SHIELDS
Other Protective Equipment:AS REQUIRED
Supplemental Safety and Health
FOR STANDARD OPERATIONS (MELTING/CUTTING/GRINDING), ALUMINUM ALLOYS
PRESENT A LOW HEALTH HAZARD.
================== Physical/Chemical Properties ==================
Melt/Freeze Pt:M.P/F.P Text: 900-1200F
Spec Gravity: 2.5-2.9
Solubility in Water:NEGLIGIBLE
Appearance and Odor:SILVERY-GREY SOLID, ODORLESS.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS. ALUMINUM: HALOGEN ACIDS, SODIUM HYDROXIDE, BROMATES,
IODATES, OR AMMONIUM NITRATE, STRONG OXIDIZERS, BASES
Stability Condition to Avoid:MOISTURE
Hazardous Decomposition Products:HYDROGEN GAS, CO, CO2, OZONE NITROGEN
OXIDES, INFRARED RADIATION, & ULTRAVIOLET RADIATION
==================== Disposal Considerations ====================
Waste Disposal Methods:USED OR UNUSED PRODUCT SHOULD BE DISPOSED OF IN
ACCORDANCE W/FEDERAL, STATE, OR LOCAL LAWS & REGULATIONS. FLAMMABLE
SOLID.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|