===================== Product Identification =====================
MSDS NAME:5159, SOLID COLORS AUTOMOTIVE TOUCH-UP
NIIN:00N045655
MSDS Number: BTXJW
=== Responsible Party ===
Company:BORDEN
Address:180 EAST BROAD ST
City:COLUMBUS
State:OH
ZIP:43215
Country:US
Info Phone Num:800-484-9400;614-431-6680
Emergency Phone Num:614-431-6600
CAGE:9P972
=== Contractor Identification ===
Company:BORDEN CHEMICAL CO
Address:180 E BROAD ST
Box:City:COLUMBUS
State:OH
ZIP:43215-3705
Country:US
Phone:614-225-6124
CAGE:86142
Company:BORDEN,INC. PACKAGING AND INDUSTRIAL PRODUCTS DIVISION
Address:180 EAST BROAD ST
Box:City:COLUMBUS
State:OH
ZIP:43215
Country:US
Phone:614-431-6600/800-848-9400
CAGE:9P972
============= Composition/Information on Ingredients =============
Name:ING 5: & REMOTE CONTROL IN COMBINATION W/APPROP USE OF
PERSONAL PROTECTIVE EQUIPMENT & PRUDENT WORK PRACTICES. (ING 7)
RTECS #:9999999ZZ
Name:ING 6: THESE TECHNIQUES MAY NOT NECESSARILY ADDRESS ALL
ISSUES PERTAINING TO YOUR OPERATIONS. WE, THEREFORE, (ING 8)
RTECS #:9999999ZZ
Name:ING 7: RECOMMEND THAT YOU CONSULT WITH EXPERTS OF YOUR
CHOICE TO DETERMINE WHETHER OR NOT YOUR PROGRAMS ARE ADEQUATE.
RTECS #:9999999ZZ
Name:2-PENTANONE, 4-METHYL; (METHYL ISOBUTYL KETONE) (SARA III)
CAS:108-10-1
RTECS #:SA9275000
Fraction by Wt: 30-50%
OSHA PEL:50 PPM;75 STEL
ACGIH TLV:50 PPM;75 STEL
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:CYCLOHEXANONE (SARA III)
CAS:108-94-1
RTECS #:GW1050000
Fraction by Wt: 5-10%
OSHA PEL:25 PPM, S
ACGIH TLV:25 PPM, S
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:XYLENE (SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 10-30%
OSHA PEL:100 PPM;150 STEL
ACGIH TLV:100 PPM;150 STEL
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:SUPP DATA: BELOW ACCEPTABLE CRITERIA. ENGINEERING CONTROLS:
THE FOLLOWING EXPOSURE CONTROL TECHNIQUES MAY BE (ING 5)
RTECS #:9999999ZZ
Name:ING 4: USED TO EFFECTIVELY MINIMIZE EMPLOYEE EXPOSURE: LOC
EXHST VENT, ENCLOSED SYS DESIGN, PROCESS ISOLATION (ING 6)
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: SKIN ABSORP/INGEST: NOT
EXPECTED TO BE HARMFUL UNDER NORMAL CONDITIONS OF USE. IF
ACCIDENTALLY SWALLOWED, BURNS OR IRRIT TO MUC MEMBS, ESOPHAGUS OR
GI TRACT CAN RESULT. INHAL:MAY BE HARMFUL IF INHALED. LIQ/VAP MAY
CAUSE IRRIT OF NOSE, THROAT & LUNGS. SKIN: MAY CAUSE IRRIT ON
PROLONGED OR (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: REPEATED CNTCT. EYES: CAUSES IRRIT.
INGRED 1: CAN CAUSE CNS DEPRESS. SIGNS & SMPS MAY INCL HDCH, DIZZ,
NAUS, VOMIT, UNCON & EVEN ASPHY. INGRED 2 & 3: CAN CAUSE LIVER &
KIDNEY DMG. CAN CAUSE CNS DEPRESS. SIGNS & SYMPS MAY INCLUDE HDCH,
DIZZ, NAUS, VOMIT, UNCON & EVEN ASPHY.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:SKIN ABSORP:IMMED FLUSH EYE/SKIN W/PLENTY OF WATER FOR @ LST
15 MIN. INGEST: DILUTE BY DRINKING LRG QTYS OF WATER. IMMED CNTCT
POIS CTL CTR/HOSPITAL EMERGENCY ROOM FOR ANY OTHER ADDITIONAL
TREATMENT D IRECTIONS. INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG,
GIVE ARTF RESP, PREFERABLY MOUTH-TO-MOUTH. SKIN:FLUSH WITH WATER.
EYE:IMMED FLUSH W/ PLENTY OF WATER FOR @ LST 15 MIN. EYELIDS SHOULD
BE (SUPP DATA)
===================== Fire Fighting Measures =====================
Flash Point:65.3F,18.5C
Extinguishing Media:USE DRY CHEMICAL, "ALCOHOL" FOAM OR CO2. WATER MAY
BE INEFTIVE, BUT SHOULD BE USED TO COOL FIRE-EXPOSED CNTNRS COOL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:KEEP LIQ & VAP AWAY FROM HEAT, SPARKS,
FLAME & OTHER IGNIT SOURCES INCL, BUT NOT LIMITED TO, PILOT LIGHTS,
HEATERS, CIGARETTES, ELECTIC MOTORS AND (SUPP DATA)
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. SOAK UP WITH
ABSORBENT MATERIAL AND REMOVE TO A CHEMICAL DISPOSAL AREA. PREVENT
ENTRY INTO NATURAL BODIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINER CLOSED. STORE IN A
COOL, DRY PLACE. AVOID PROLONGD OR REPEATED CONTACT WITH EYES, SKIN
OR CLTHG. AVOID BREATHING VAPOR.
Other Precautions:HANDLE IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE AND
SAFETY PRACTICES. THESE PRACTICES INCLUDE AVOIDING UNNECESSARY
EXPOSURE AND REMOVAL OF THE MATERIAL FROM EYES, SKIN AND CLOTHING.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHERE AIR CONTAMS CAN EXCEED ACCEPTABLE
CRITERIA, USE NIOSH/MSHA APPROVED RESP PROT EQUIP. RESPS SHOULD BE
SELECTED BASED ON THE FORM AND CONC OF CONTAMS IN AIR IN ACCORD
W/OSHA 29 CFR 1910.134 OR OTH ER APPLICABLE STDS OR GUIDELINES.
Ventilation:IF AIRBORNE CONTAMS ARE GENERATED WHEN MATL IS HEATED/
HANDLED, SUFFICIENT VENT IN VOL & AIR FLOW PATTERNS (SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
% VOL:58.3-79.0 (WT). EXPLO HAZS: STATIC DISCHARGE. VAP IS HVR/AIR &
MAY SETTLE IN LOW PLACES OR TRAVEL OUTWARD TO A SOURCE OF IGNIT AND
FLASHBACK. FIRST AID PROC: HELD APART DURING IRRIGATION TO INSU RE
WATER CNTCT W/ENTIR SURF OF EYES & LIDS. CALL MD. VENT: SHOULD BE
PROVIDED TO KEEP AIR CONTAM CONC LEVELS (ING 4)
================== Physical/Chemical Properties ==================
HCC:F3
Spec Gravity:0.88-1.27
Solubility in Water:SLIGHT
Appearance and Odor:COLORED LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:SUPDAT
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO2.
==================== Disposal Considerations ====================
Waste Disposal Methods:RECOVER FREE LIQUID. ABSORB RESIDUE AND DISPOSE
OF ACCORDING TO LOCAL, STATE/PROVINCIAL, AND FEDERAL REQUIREMENTS.
EMPTY CONTAINER: MAY CONTAIN EXPLOSIVE VAPORS. DO NOT CUT, PUNCTURE
OR WELD ON OR NEA RBY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
SBR 8107
| 9003-55-8 |
|
SBR 8110
| 9003-55-8 |
|
SBR 8113
| 9003-55-8 |
|
SBR 8140
| 9003-55-8 |
|
SBR 8144
| 9003-55-8 |
|
5157, SOLID COLORS AUTOMOTIVE TOUCH-UP
| 108-10-1
108-94-1
1330-20-7 |
|
5159, SOLID COLORS AUTOMOTIVE TOUCH-UP
| 108-10-1
108-94-1
1330-20-7 |
|
5161, SOLID COLORS AUTOMOTIVE TOUCH-UP
| 108-10-1
108-94-1
1330-20-7 |
|
5164, SOLID COLORS AUTOMOTIVE TOUCH-UP
| 108-10-1
108-94-1
1330-20-7 |
|
5167, SOLID COLORS AUTOMOTIVE TOUCH-UP
| 108-10-1
108-94-1
1330-20-7 |
|
5172, SOLID COLORS AUTOMOTIVE TOUCH-UP
| 108-10-1
108-94-1
1330-20-7 |
|
5174, SOLID COLORS AUTOMOTIVE TOUCH-UP
| 108-10-1
108-94-1
1330-20-7 |
|
5180, SOLID COLORS AUTOMOTIVE TOUCH-UP
| 1330-20-7
108-10-1
108-94-1 |
|
EPOXY COATINGS, B58SW1
| 64742-47-8
1330-20-7
14808-60-7 |
|
EPOXY COATINGS, B58WW3
| 64742-95-6
14808-60-7
13463-67-7 |
|
EPOXY COATINGS, B62HW6
| 64742-95-6
14808-60-7
13463-67-7 |
|
EPOXY COATINGS, B58VW2
| |
|
TM-5494, TRAFFIC MARKING PAINT SOLVENT BASED
| 64742-89-8
64742-48-9
108-88-3
1330-20-7
14807-96-6
1317-65-3
13463-67-7 |
|
CAPTAX, G00019
| 149-30-4
8042-47-5 |
|
F-MATIC REFILL FRAGRANCE CARTRIDGE (GEL TYPE)
| |
|
TECHALLOY, 1561
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, EH14
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, EM12K
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, EL12
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, EL8
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, 70S-7
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, 70S-6
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, 70S-4
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, 70S-3
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, 70S-2
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, 70S-1
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, R-65
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, R-60
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, R-45
| 7439-89-6
7439-96-5
7440-21-3 |
|
TECHALLOY, ER70S-G
| 7439-89-6
7439-96-5
7440-21-3 |
|
IM-1040 INSTANT METAL COAT
| 64742-47-8
64742-89-8
64742-89-8
13530-65-9 |
|
IM-1030 INSTANT METAL COAT
| 64742-89-8
64742-47-8
64742-89-8 |
|
IM-1020 INSTANT METAL COAT
| 64742-47-8
64742-89-8
64742-89-8 |
|
IM-1019 INSTANT METAL COAT
| 64742-47-8
64742-89-8
64742-89-8 |
|
IM-1015 INSTANT METAL COAT.
| 64742-47-8
64742-89-8
64742-89-8 |
|
IM-1013 INSTANT METAL COAT
| 64742-47-8
64742-89-8
64742-89-8 |
|
IM-1011 INSTANT METAL COAT
| 64742-89-8
64742-47-8
64742-89-8 |
|
IM-1010 INSTANT METAL COAT
| 64742-47-8
64742-89-8
64742-89-8 |
|
IM-1000 INSTANT METAL COAT
| 64742-47-8
64742-89-8
64742-89-8 |
|
IM-1060 INSTANT METAL COAT
| 64742-47-8
64742-89-8
64742-89-8 |
|
SODIUM CARBONATE ANHYDROUS, SX0395
| 497-19-8 |
|
SODIUM CARBONATE ANHYDROUS, SX0397
| 497-19-8 |
|
SODIUM CARBONATE ANHYDROUS, SX0400
| 497-19-8 |
|
SODIUM CARBONATE ANHYDROUS, SX0410
| 497-19-8 |
|
SODIUM CARBONATE ANHYDROUS, 6395
| 497-19-8 |
|
|