other prec:ch. 9, safe pratices in welding & cutting.
eye prot:w/filter lens. prov prot screens & fash goggs, if
ing 16:that is too dark to see the weld zone. then go the
iron
manganese (sara iii).
silicon
supp data:respect to the fume plume, as well as the
ing 4:hydrocarbon vaps from cleaning & degreasing
ing 5:may decrease/incr by many times the original conc in
ing 6:decomp prods of normal operation incl those
ing 7:shown in ing section, plus those from the base metal
ing 8:fume constituents of prod could incl primary oxides
msds toxicity property"> ing 10:formed by radiation from arc, in addition to
ing 11:are employed. one rec way to determine composition &
ing 12:is to take an air sample from inside the welder's
ing 13:& aws f1.2. see aws publication:"fume and gases in
other prec:ch. 9, safe pratices in welding & cutting.
eye prot:w/filter lens. prov prot screens & fash goggs, if
ing 16:that is too dark to see the weld zone. then go the
iron
manganese (sara iii).
silicon
supp data:respect to the fume plume, as well as the
ing 4:hydrocarbon vaps from cleaning & degreasing
ing 5:may decrease/incr by many times the original conc in
ing 6:decomp prods of normal operation incl those
ing 7:shown in ing section, plus those from the base metal
ing 8:fume constituents of prod could incl primary oxides
msds toxicity property">
Search   
MSDS  : TECHALLOY, 70S-7
CAS  : 7439-89-6
7439-96-5
7440-21-3
NAME  : ing 9:& aluminum. gaseous reaction prods may incl carbon
ing 10:formed by radiation from arc, in addition to
ing 11:are employed. one rec way to determine composition &
ing 12:is to take an air sample from inside the welder's
ing 13:& aws f1.2. see aws publication:"fume and gases in
other prec:ch. 9, safe pratices in welding & cutting.
eye prot:w/filter lens. prov prot screens & fash goggs, if
ing 16:that is too dark to see the weld zone. then go the
iron
manganese (sara iii).
silicon
supp data:respect to the fume plume, as well as the
ing 4:hydrocarbon vaps from cleaning & degreasing
ing 5:may decrease/incr by many times the original conc in
ing 6:decomp prods of normal operation incl those
ing 7:shown in ing section, plus those from the base metal
ing 8:fume constituents of prod could incl primary oxides
===================== Product Identification =====================

MSDS NAME:TECHALLOY, 70S-7
NIIN:00N045835
MSDS Number: BTXKW
=== Responsible Party ===
Company:TECHALLOY COMPANY INC
Address:2310 CHESAPEAKE AVE
City:BALTIMORE
State:MD
ZIP:21222
Country:US
Info Phone Num:800-638-1458
Emergency Phone Num:301-633-9300
CAGE:IO642
=== Contractor Identification ===
Company:TECHALLOY COMPANY INC
Address:2310 CHESAPEAKE AVE
Box:City:BALTIMORE
State:MD
ZIP:21222
Country:US
Phone:800-638-1458
CAGE:IO642
Company:TECHALLOY COMPANY, INC.
Address:2310 CHESAPEAKE AVENUE
Box:City:BALTIMORE
State:MD
ZIP:21222
Country:US
Phone:410-633-9300; 800-638-1458
CAGE:59711

============= Composition/Information on Ingredients =============

Name:ING 9:& ALUMINUM. GASEOUS REACTION PRODS MAY INCL CARBON
MONOXIDE & CARBON DIOXIDE.OZONE & NITROGEN OXIDE MAY BE(ING 11)
RTECS #:9999999ZZ

Name:ING 10:FORMED BY RADIATION FROM ARC, IN ADDITION TO
SHIELDING GASES LIKE ARGON & CARBON DIOXIDE WHENEVER THEY (ING 12)
RTECS #:9999999ZZ

Name:ING 11:ARE EMPLOYED. ONE REC WAY TO DETERMINE COMPOSITION &
QLTY OF FUMES & GASES TO WHICH WORKERS ARE EXPOSED (ING 13)
RTECS #:9999999ZZ

Name:ING 12:IS TO TAKE AN AIR SAMPLE FROM INSIDE THE WELDER'S
HELMENT IF WORN OR IN WORKER'S BRTHG ZONE. SEE AWS F1. (ING 14)
RTECS #:9999999ZZ

Name:ING 13:& AWS F1.2. SEE AWS PUBLICATION:"FUME AND GASES IN
THE WELDING ENVIRONMENT".
RTECS #:9999999ZZ

Name:OTHER PREC:CH. 9, SAFE PRATICES IN WELDING & CUTTING.
RTECS #:9999999ZZ

Name:EYE PROT:W/FILTER LENS. PROV PROT SCREENS & FASH GOGGS, IF
NEC, TO SHLD OTRS. AS A RULE OF THUMB START W/SHADE (ING 17)
RTECS #:9999999ZZ

Name:ING 16:THAT IS TOO DARK TO SEE THE WELD ZONE. THEN GO THE
NEXT LIGHTER SHADE WHICH GIVES SUFFIENT VIEW OF THE WELD ZONE.
RTECS #:9999999ZZ

Name:IRON
CAS:7439-89-6
RTECS #:NO4565500
Fraction by Wt: 90-99%
OSHA PEL:10 MG/M3
ACGIH TLV:5 MG/M3

Name:MANGANESE (SARA III).
CAS:7439-96-5
RTECS #:OO9275000
Fraction by Wt: 1-5%
OSHA PEL:5 MG/M3 DUST, C
ACGIH TLV:5 MG/M3 DUST, 1 FUME

Name:SILICON
CAS:7440-21-3
RTECS #:VW0400000
Fraction by Wt: .1-1.0%
OSHA PEL:10 MG/M3 TDUST;5RESP
ACGIH TLV:10 MG/M3 TDUST

Name:SUPP DATA:RESPECT TO THE FUME PLUME, AS WELL AS THE
PRESENCE OF CONTAMINANTS IN ATMOSPHERE (SUCH AS CHLORINATED (ING 5)
RTECS #:9999999ZZ

Name:ING 4:HYDROCARBON VAPS FROM CLEANING & DEGREASING
ACTIVITIES). WHEN ELECTRODE IS CONSUMED, FUME & GAS COMPONENT (ING
6)
RTECS #:9999999ZZ
Other REC Limits:NONE RECOMMENDED

Name:ING 5:MAY DECREASE/INCR BY MANY TIMES THE ORIGINAL CONC IN
ELECTRODE. ALSO, NEW CMPNDS NOT IN ELECTRODE MAY FORM.(ING 7)
RTECS #:9999999ZZ

Name:ING 6:DECOMP PRODS OF NORMAL OPERATION INCL THOSE
ORIGINATING FROM VOLATILIZATION, REACTION, OR OXIDATION OF MATL(ING
8)
RTECS #:9999999ZZ

Name:ING 7:SHOWN IN ING SECTION, PLUS THOSE FROM THE BASE METAL
& COATING, ETC., AS NOTED ABOVE. REASONABLY EXPECTED (ING 9)
RTECS #:9999999ZZ

Name:ING 8:FUME CONSTITUENTS OF PROD COULD INCL PRIMARY OXIDES
OF IRON;SECONDARY COMPLEX OXIDES OF MANGANSES, SILICON(ING 10)
RTECS #:9999999ZZ

===================== Hazards Identification =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ELECTRIC ARC-WELDING MAY CREATE ONE OR
MORE OF THE FOLLOWING HLTH HAZ:FUMES & GASES CAN BE DANGEROUS TO
YOUR HEALTH. ARC RAYS CAN INJURE EYES & BURN SKIN. ELECTRIC SHOCK
CAN KILL. "SHORT-TERM OVEREXPO S TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS: DIZZ, NAUS, OR DRYNESS OR IRRIT OF NOSE,
THROAT, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:OR EYES, TIGHTNESS IN CHEST, FEVER AND
ALLERGIC REACTIONS, (SEE EXPLO HAZ AND SPILL/LEAK SECTION)."
"LONG-TERM (CHRONIC) OVEREXPOS TO WELDING FUMES MAY LEAD TO
SIDEROSIS (IRON DEPOSIT IN LUNG S) AND IS BELIEVED BY SOME
INVESTIGATORS TO AFFECT PULMONARY FUNCTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

======================= First Aid Measures =======================

Eyes:FLUSH EYES WITH COPIOUS AMOUNTS OF WATER FOR AT LEAST 15
MINUTES . SKIN:FLUSH WITH COPIOUS AMOUNTS OF WATER . INHAL:REMOVE
TO FRESH AIR. SUPPORT BREATHING (GIVE O2/ ARTIFICIAL RESPIRA TION)
. INGEST:CALL MD IMMEDIATELY . EMPLOY FIRST AID TECHNIQUE
RECOMMENDED BY THE AMERICAN RED CROSS.

===================== Fire Fighting Measures =====================

Extinguishing Media:USE EXTINGUISHING MEDIA SUITABLE FOR SURROUNDING
FIRES .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE COMBUST &
FLAMMABLES. REFER TO AMERICAN NATIONAL STANDARDS Z49.1 FOR FIRE
PREVENTION DURING USE OF WELDING & ALLIED PROCEDURES.

================== Accidental Release Measures ==================

Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

====================== Handling and Storage ======================

Handling and Storage Precautions:TRAIN THE WELDER NOT TO TOUCH LIVE
ELECTRICAL PARTS AND INSULATE HIMSELF FROM WORK AND GROUND. TRAIN
THE WELDER TO KEEP HIS HEAD OUT OF THE FUMES.
Other Precautions:USE EXHAUST SYS TO CLEAR WELDING FUMES.MAKE SURE
INHALED AIR DOES NOT CONTAIN FUME CONSTITUENTS ABOVE PERMISSIBLE
EXPOS LEVELS.FOR ADDN SAFETY INFO SEE AMER STD Z49.1-1983, SAFETY
IN WELDING & CUTTING , & WELDING HANDBOOK, VOL. 1, (ING 15)

============= Exposure Controls/Personal Protection =============

Respiratory Protection:USE RESPIRABLE FUME RESPIRATORY OR AIR SUPPLIED
RESPIRATORY WHEN WELDING IN A CONFINED SPACE OR WHERE LOCAL EXHAUST
OR VENTILATION DOES NOT KEEP EXPOSURE BELOW THE RECOMMENDED
EXPOSURE LIMITS.
Ventilation:USE ENOUGH VENT, LOCAL EXHAUST AT ARC, OR BOTH, TO KEEP THE
FUMES AND GASES FORM THE WORKER'S BRTHG ZONE & GENERAL AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPVD WEAR HELMENT/USE FSHLD(ING 16
Other Protective Equipment:ARM PROTECTORS, APRONS, HATS, SHOULDER
PROTECTION, AS WELL AS DARK SUBSTANTIAL CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PRODS:, & ELECTRODES USED. OTHER CNDTNS WHICH ALSO INFLUENCE
COMPOSITION & QUALITY OF FUMES & GASES TO WHICH WORKERS MAY BE
EXPOSED INCL:COATINGS ON METAL BEING WELDED (SUCH AS PAINT, PLATI
NG, OR GALVANIZING), NUMBER OF WELDERS & VOL OF WORK AREA, QUALITY
& AMT OF VENT, POSTION OF WELDER'S HEAD W/ (ING 3)

================== Physical/Chemical Properties ==================

HCC:N1

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:THE COMPOSITION & QUALITY OF WELDING
FUMES AND GASES ARE DEPENDED UPON THE METAL BEING WELDED, PROCESS,
PROC (SUPP DATA)

==================== Disposal Considerations ====================

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT RESIDUE DISPOSABLE CONTAINER AND
OR LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL
COMPLIANCE WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
SBR 8107 9003-55-8
SBR 8110 9003-55-8
SBR 8113 9003-55-8
SBR 8140 9003-55-8
SBR 8144 9003-55-8
5157, SOLID COLORS AUTOMOTIVE TOUCH-UP 108-10-1
108-94-1
1330-20-7
5159, SOLID COLORS AUTOMOTIVE TOUCH-UP 108-10-1
108-94-1
1330-20-7
5161, SOLID COLORS AUTOMOTIVE TOUCH-UP 108-10-1
108-94-1
1330-20-7
5164, SOLID COLORS AUTOMOTIVE TOUCH-UP 108-10-1
108-94-1
1330-20-7
5167, SOLID COLORS AUTOMOTIVE TOUCH-UP 108-10-1
108-94-1
1330-20-7
5172, SOLID COLORS AUTOMOTIVE TOUCH-UP 108-10-1
108-94-1
1330-20-7
5174, SOLID COLORS AUTOMOTIVE TOUCH-UP 108-10-1
108-94-1
1330-20-7
5180, SOLID COLORS AUTOMOTIVE TOUCH-UP 1330-20-7
108-10-1
108-94-1
EPOXY COATINGS, B58SW1 64742-47-8
1330-20-7
14808-60-7
EPOXY COATINGS, B58WW3 64742-95-6
14808-60-7
13463-67-7
EPOXY COATINGS, B62HW6 64742-95-6
14808-60-7
13463-67-7
EPOXY COATINGS, B58VW2
TM-5494, TRAFFIC MARKING PAINT SOLVENT BASED 64742-89-8
64742-48-9
108-88-3
1330-20-7
14807-96-6
1317-65-3
13463-67-7
CAPTAX, G00019 149-30-4
8042-47-5
F-MATIC REFILL FRAGRANCE CARTRIDGE (GEL TYPE)
TECHALLOY, 1561 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, EH14 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, EM12K 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, EL12 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, EL8 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, 70S-7 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, 70S-6 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, 70S-4 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, 70S-3 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, 70S-2 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, 70S-1 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, R-65 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, R-60 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, R-45 7439-89-6
7439-96-5
7440-21-3
TECHALLOY, ER70S-G 7439-89-6
7439-96-5
7440-21-3
IM-1040 INSTANT METAL COAT 64742-47-8
64742-89-8
64742-89-8
13530-65-9
IM-1030 INSTANT METAL COAT 64742-89-8
64742-47-8
64742-89-8
IM-1020 INSTANT METAL COAT 64742-47-8
64742-89-8
64742-89-8
IM-1019 INSTANT METAL COAT 64742-47-8
64742-89-8
64742-89-8
IM-1015 INSTANT METAL COAT. 64742-47-8
64742-89-8
64742-89-8
IM-1013 INSTANT METAL COAT 64742-47-8
64742-89-8
64742-89-8
IM-1011 INSTANT METAL COAT 64742-89-8
64742-47-8
64742-89-8
IM-1010 INSTANT METAL COAT 64742-47-8
64742-89-8
64742-89-8
IM-1000 INSTANT METAL COAT 64742-47-8
64742-89-8
64742-89-8
IM-1060 INSTANT METAL COAT 64742-47-8
64742-89-8
64742-89-8
SODIUM CARBONATE ANHYDROUS, SX0395 497-19-8
SODIUM CARBONATE ANHYDROUS, SX0397 497-19-8
SODIUM CARBONATE ANHYDROUS, SX0400 497-19-8
SODIUM CARBONATE ANHYDROUS, SX0410 497-19-8
SODIUM CARBONATE ANHYDROUS, 6395 497-19-8

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net