===================== Product Identification =====================
MSDS NAME:SEMI GLOSS ENAMEL SNOW SHADOW, 5990W
NIIN:00N053124
MSDS Number: BVPLQ
=== Responsible Party ===
Company:STILES PAINT MFG
Address:2240 W WINTON AVE
City:HAYWARD
State:CA
ZIP:94545
Country:US
Info Phone Num:415-887-8868
Emergency Phone Num:415-887-8880
CAGE:00L71
=== Contractor Identification ===
Company:SHANNONS PAINT INC
Address:40985 FREMONT BLVD
Box:City:FREMONT
State:CA
ZIP:94538
Country:US
Phone:415-656-5151
CAGE:0P3V6
Company:STILES PAINT MFG INC
Address:21595 CURTIS ST
Box:City:HAYWARD
State:CA
ZIP:94545
Country:US
Phone:510-887-8868
CAGE:00L71
============= Composition/Information on Ingredients =============
Name:BICYCLIC OXAZOLIDINES (SOLUTION). VP:23 @ 20C.
Fraction by Wt: <0.5%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:TITANIUM OXIDE; (TITANIUM DIOXIDE)
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 15%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST
Name:PROPIONIC ACID, 2-METHYL-, MONOESTER
W/2,2,4-TRIMETHYL-1,3-PENTANEDIOL; (TEXANOL). VP:1 @ 20C.
CAS:25265-77-4
RTECS #:UF6000000
Fraction by Wt: 0.78%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:AMMONIUM HYDROXIDE (SARA III)
CAS:1336-21-6
RTECS #:BQ9625000
Fraction by Wt: <0.5%
OSHA PEL:25 PPM (MFR)
ACGIH TLV:25 PPM (MFR)
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:ETHYLENE GLYCOL (SARA III). VP:0.1 @ 20C.
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: <5%
OSHA PEL:N/K
ACGIH TLV:50 PPM, VAPOR, C
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:DIZZINESS, BREATHING DIFFICULTY,
HEADACHES & LOSS OF COORDINATION. EYE CONTACT:SEVERE IRRITATION &
DERMATITIS. SKIN CONTACT:CAN DRY & DEFAT SKIN CAUSING CRACKS,
IRRITATION & DERMATITIS. INGEST:C AN CAUSE GASTROINTESTINAL
IRRITATION, VOMITING, NAUSEA & DIARRHEA.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ANESTHESIA, RESPIRATORY TRACT
IRRITATION, DERMATITIS, NAUSEA, VOMITING.
======================= First Aid Measures =======================
First Aid:INHAL:MOVE PERSON TO FRESH AIR. IF BREATHING STOPS APPLY ARTF
RESP & SEEK IMMEDIATE MEDICAL ATTENTION. EYE:FLUSH W/LARGE
QUANTITIES OF WATER FOR AT LEAST 15 MINUTES. SKIN:WASH THOROUGHLY
W/SOAP & WATE R & SEE MD. INGEST:DO NOT INDUCE VOMITING. CAN CAUSE
CHEMICAL PNEUMONITIS & PULMONARY EDEMA. CONTACT MD IMMEDIATELY.
===================== Fire Fighting Measures =====================
Flash Point:>200F,>93C
Lower Limits:2.6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG,
OTHER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER SHOULD NOT BE USED EXCEPT AS FOG TO KEEP NEARBY
CONTAINERS COOL.
Unusual Fire/Explosion Hazard:HANDLE AS FLAMM LIQ. VAPS FORM EXPLO MIXT
IN AIR BTWN UPPER & LOWER EXPLO LIMS WHICH CAN BE IGNITED BY MANY
SOURCES SUCH AS PILOT LIGHTS, OPEN FLAMES, (SUPDAT)
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE IGNITION SOURCES, PROVIDE GOOD
VENTILATION, DIKE SPILL AREA & ADD ABSORBENT EARTH OR SAWDUST TO
SPILLED LIQUID. THOROUGHLY WET W/WATER & MIX.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:USE NONSPARKING UTENSILS WHEN HANDLING
THIS MATERIAL. AVOID HOT METAL SURFACES. USE IN COOL WELL
VENTILATED AREAS.
Other Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN USE. KEEP AWAY
FROM EXCESSIVE HEAT & OPEN FLAMES. SMOKING IN AREAS WHERE THIS
MATERIAL IS USED SHOULD BE STRICTLY PROHIBITED. SOME COLORS MAY
CONTAIN LEAD CONTAINING PIGMENTS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WHEN SPRAYING THIS MATL USE NIOSH/MSHA APPRVD
CARTRIDGE RESP/DUST MASK SUITABLE TO KEEP AIRBORNE MISTS VAP CONCS
BELOW TIME WEIGHTED TLVS. WHEN USING IN POORLY VENTILATED &
CONFINED AREAS, USE NIOSH/M SHA APPRVD FRESH-AIR SUPPLYING (SUPDAT)
Ventilation:GENERAL MECHANICAL VENT OR LOCAL EXHAUST SHOULD BE SUITABLE
TO KEEP VAP CONCS BELOW TLV. VENT EQUIP MUST BE EXPLO-PROOF.
Protective Gloves:IMPERMEABLE CHEMICAL GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:USE IMPERMEABLE APRONS & PROT CLTHG WHENEVER
POSS TO PVNT SKIN CONT. EMERG EYE WASH AND DELUGE SHOWER WHICH
(SUPP DATA)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:ELECTRICAL MOTORS & SWITCHES. RESP PROT:RESPIRATOR OR SCBA.
OTHER PROT. EQUIP: MEETS ANSI DESIGN CRITERIA .
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>200F,>93C
Vapor Pres:SEE INGS
Vapor Density:LTR/AIR
Spec Gravity:1.17
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:70.97
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ALKALINE MATERIALS, STRONG ACIDS & OXIDIZING MATERIALS.
Stability Condition to Avoid:EXCESSIVE HEAT, POOR VENTILATION,
CORROSIVE ATMOSPHERES, EXCESSIVE AGING.
Hazardous Decomposition Products:TYPICAL BY-PRODUCTS OF COMBUSTION.
==================== Disposal Considerations ====================
Waste Disposal Methods:COLLECT ABSORBENT/WATER/SPILLED LIQUID MIXTURE
INTO METAL CONTAINERS & ADD ENOUGH WATER TO COVER. CONSULT LOCAL,
STATE & FEDERAL HAZARDOUS WASTE REGULATION BEFORE DISPOSING INTO
APPROVED HAZARDOUS WAS TE LANDFILLS. OBEY RELEVANT LAWS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
MARBLE DRESSING, G41641
| 64741-65-7 |
|
MARBLE CLEANER, G41441
| 7722-88-5
1330-72-7 |
|
#6E LACQUER THINNER
| 64742-89-8
108-88-3
67-64-1
78-93-3
67-56-1 |
|
KX-P4410 KX-89C BLACK TONER FOR KX-P4430
| 25787-47-9
1317-61-9
25085-53-4 |
|
KX-P4410 X2 BLACK DEVELOP FOR KX-P4430
| 1317-61-9 |
|
PT-CRE (ETCH) PART A
| 7722-84-1 |
|
PT-CRE (ETCH) PART B
| 77-92-9
7758-99-8 |
|
SELECTRON TIN (ALK) SOLUTION, SPS5950
| 21651-19-4
107-15-3 |
|
L97426, 0674036, PREPARED PLATE MEDIA (SUPP DATA)
| 57-50-1 |
|
SUSCEPTIBILITY TEST DISCS, L31321, 0410127
| 1406-05-9 |
|
135 LOW FLASH CONTACT CEMENT
| 108-88-3
67-64-1
110-54-3 |
|
KX-P453(KX-72 BLACK TONER FOR UF-766)
| 25767-47-9
1317-61-9
25085-53-4 |
|
SX TONER
| 1333-86-4
1332-37-2 |
|
F-V-S FLEA FOGGER/210
| 71-55-6
74-98-6 |
|
SUPER CALSTIK
| 1317-65-3
1344-09-8
9003-55-8
13463-67-7 |
|
AQUAPRIMER SURFACER WHITE, 882
| 1336-21-6
13463-67-7
7727-43-7
1863-63-4
111-76-2
112-34-5
85-68-7 |
|
ACME APPLICATOR FORMULA TRIMEC WEED-NO-MORE, 885
| 94-74-6
93-65-2
1918-00-9
124-40-3 |
|
OXYGEN CELL GEL
| 1310-58-3
6381-92-6
107-21-1 |
|
SALT SOLUTION
| 7732-18-5
7447-40-7
7757-79-1
139-33-3 |
|
MAGNOLIA CHEMICAL HYDRATED LIME
| |
|
PRO-LINK ANTISEPTIC LOTION CLEANSER, MH312
| 151-21-3
88-04-0 |
|
PRO-LINK ANTISEPTIC LOTION CLEANSER, MH312C
| 151-21-3
88-04-0 |
|
AROCLOR 1242 MIX, 32009
| 110-54-3
53469-21-9 |
|
AROCLOR 1242 MIX, 32009-500
| 110-54-3
53469-21-9 |
|
AROCLOR 1242 MIX, 32109
| 110-54-3
53469-21-9 |
|
GRIT-O'COBS
| |
|
LITE-R-COBS
| |
|
DRI-ZORB
| |
|
NU-KLAD,114A RESIN
| 7727-43-7
25068-38-6
14808-60-7
26447-14-3
13463-67-7
98-00-0 |
|
LOCQUIC PRIMER T 7471,19267
| 67-64-1
67-63-0
3077-12-1
149-30-4 |
|
PETRO OIL, 4053-1000
| 64741-96-4 |
|
STODDARD SOLVENT
| 8052-41-3 |
|
OXYGEN, CW50
| 7782-44-7 |
|
VACTAN
| 1401-55-4 |
|
BIO-DRAIN
| 9002-93-1 |
|
DASCO ADDITIVE AFW-P
| 126-73-8 |
|
PEEL AWAY 7
| 1119-40-0
627-93-0
872-50-4
1332-58-7 |
|
ANTIBACTERIAL CLEAN & SMOOTH
| |
|
G-100-SA (SEAM ADHESIVE)
| 108-88-3
64741-84-0
67-64-1 |
|
SORBITAL GM
| 9004-34-6 |
|
TF SOLVENT
| 76-13-1
124-38-9 |
|
SCCO RUST ARRESTING COMPOUND
| |
|
STANDARD STOCK SUSPENSION, 8052
| 7632-04-4
50-00-0 |
|
DASCOOL 2003
| 64742-53-6
64742-52-5
111-42-2 |
|
ACRYL SET LIQUID POLYMER, 04000
| |
|
COLD SEAL
| 9016-00-6
12001-26-2 |
|
WHITE OIL, 7494
| 8042-47-5 |
|
GREASE CURE II, 3001
| 92-52-4
67-63-0 |
|
SPRED ULTRA-LATEX SEMI-GLOSS ENAMEL-PURE WHITE, 8200
| 57-55-6
1332-58-7
108-05-4
13463-67-7
25035-69-2
25067-01-0
7732-18-5 |
|
SEMI GLOSS ENAMEL SNOW SHADOW, 5990W
| 13463-67-7
25265-77-4
1336-21-6
107-21-1 |
|
|