===================== Product Identification =====================
MSDS NAME:STODDARD SOLVENT
NIIN:00N053090
MSDS Number: BVPKR
=== Responsible Party ===
Company:MALLINCKRODT INC
Box:M
City:PARIS
State:KY
ZIP:40361
Country:US
Info Phone Num:314-982-5000
Emergency Phone Num:314-982-5000
CAGE:62910
=== Contractor Identification ===
Company:MALLINCKRODT SPECIALTY CHEMICALS CO
Address:222 RED SCHOOL LANE
Box:City:PHILLIPSBURG
State:NJ
ZIP:08865
Country:US
Phone:908-859-2151
CAGE:62910
============= Composition/Information on Ingredients =============
Name:STODDARD SOLVENT
CAS:8052-41-3
RTECS #:WJ8925000
OSHA PEL:500 PPM
ACGIH TLV:100 PPM
Name:HNDLG/STOR PREC:STORAGE RECOMMENDED. INSIDE STORAGE SHOULD
BE IN STANDARD FLAMMABLE LIQUIDS STORAGE ROOM OR (ING 3)
RTECS #:9999999ZZ
OSHA PEL:N/K
ACGIH TLV:N/K
Name:ING 2:CABINET. CONTAINERS SHOULD BE BONDED AND GROUNDED FOR
TRANSFERS TO AVOID STATIC SPARKS.
RTECS #:9999999ZZ
OSHA PEL:N/K
ACGIH TLV:N/K
Name:VENT:PREFERRED BECAUSE IT CAN CONTROL EMISSIONS OF
CONTAMINANT AT SOURCE, PREVENTING DISPERSION OF IT INTO (ING 5)
RTECS #:9999999ZZ
OSHA PEL:N/K
ACGIH TLV:N/K
Name:ING 4:GENERAL WORK AREA. USE EXPLOSION-PROOF EQUIPMENT.
RTECS #:9999999ZZ
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: EFFECTS ARE TYPICALLY THOSE OF
MOST HYDROCARBONS, DIZZ & EUPHORIA LEADING TO UNCON IN SEVERE
CASES. VAPS MAY ALSO IRRIT RESP TRACT. CNS DEPRESSANT. INGEST:NOT
HIGHLY TOXIC (FATAL DOSE FOR HUMAN S ESTIMATED AT 3-4 OZ) BUT ASPIR
OF SMALL AMTS AFTER INGEST MAY CAUSE LUNG EDEMA & POSS DEATH. (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: SKIN:DEFATTING ACTION OF SOLVENT MAY
LEAD TO SORENESS, INFLAMMATION & POSS DERM. EYE:VAPS MAY BE IRRIT
AT CONCS OF 450 PPM & ABOVE (15 MIN EXPOS) & CNTCT W/LIQUID SOLVENT
CAN BE PAINFUL & PO SS DMG EYE TISS. CHRONIC:MAY LEAD TO
LIVER/KIDNEY DMG OR CENTRAL NERVOUS SYSTEM COMPLICATIONS.
Medical Cond Aggravated by Exposure:PERSONS W/PREEXISTING SKIN
DISORDERS OR EYE PROBLEMS OR IMPAIRED KIDNEY FUNCTION MAY BE MORE
SUSCEPTIBLE TO EFFECTS OF SUBSTANCE.
======================= First Aid Measures =======================
First Aid:INHAL:REMOVE TO FRESH AIR. IF NOT BRTHG, GIVE ARTIF RESP. IF
BRTHG DFCLT, GIVE OXYGEN. CALL MD. INGEST:CALL MD IMMED. IF
SWALLOWED, DO NOT INDUCE VOMIT UNLESS MORE THAN 1-2 OZ INGESTED &
MED HELP NOT AVAIL. SKIN:REMOVE ANY CONTAMD CLTHG. WASH SKIN
W/SOAP/MILD DETERGENT & WATER FOR AT LEAST 15 MIN. GET MED ATTN IF
IRRIT DEVELOPS/PERSISTS. EYE:WASH W/PLENTY OF WATER FOR AT LEAST 15
MIN, (SUPP DATA)
===================== Fire Fighting Measures =====================
Flash Point:>100F,>38C
Lower Limits:0.8%
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, ALCOHOL FOAM, OR CARBON
DIOXIDE. DIRECT STREAM OF WATER CAN SCATTER FLAMES.
Fire Fighting Procedures:WEAR FULL PROT CLTHG & NIOSH/APPRVD SCBA
W/FULL FACEPIECE OPERATED IN PRESS DEMAND/OTHER POS PRESS MODE.
WATER SPRAY MAY BE USED TO KEEP FIRE EXPSD CNTNRS COOL.
Unusual Fire/Explosion Hazard:FLASH POINT, VAPOR-AIR MIXTURES ARE
EXPLOSIVE WITHIN FLAMMABLE LIMITS.
================== Accidental Release Measures ==================
Spill Release Procedures:VENT AREA OF LEAK/SPILL. REMOVE ALL SOURCES OF
IGNIT. USE NON-SPARKING TOOLS. CLEAN-UP PERSONNEL REQUIRE PROT
CLTHG & RESP PROT FROM VAPS. CONTAIN & RECOVER LIQ WHEN POSS.
COLLECT AS HAZ WASTE & ATOMI ZE IN SUITABLE RCRA APPRVD COMBUSTION
(SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP IN TIGHTLY CLOSED CNTNR. STORE IN
COOL, DRY, VENT AREA AWAY FROM SOURCES OF HEAT, MOISTURE &
INCOMPATIBLE SUBSTANCES. OUTSIDE/DETACHED (ING 2)
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF TLV EXCEEDED NIOSH/MSHA APPRVD FULL FACEPIECE
CHEMICAL CARTRIDGE RESPIRATOR MAY BE WORN UP TO MAXIMUM USE CONC
SPECIFIED BY RESPIRATOR SUPPLIER. ALTERNATIVELY, A SUPPLIED AIR
FULL FACEPIECE RESPIRA TOR OR AIRLINED HOOD MAY BE WORN.
Ventilation:SYSTEM OF LOCAL &/OR GENERAL EXHST RECOMM TO KEEP EXPOS
BELOW AIRBORNE EXPOS LIMITS. LOCAL EXHST VENT GENERALLY (ING 4)
Protective Gloves:RUBBER OR NEOPRENE GLOVES.
Eye Protection:ANSI APPVD CHEM WORK GOGG
Other Protective Equipment:IMPERVIOUS BOOTS, APRON OR COVERALLS AS
NEEDED IN AREAS OF UNUSUAL EXPOSURE.
Work Hygienic Practices:EMERG EYE WASH & DELUGE SHOWER WHICH MEET ANSI
DESIGN CRITERIA >
Supplemental Safety and Health
FIRST AID PROC:LIFTING LOWER/UPPER LIDS OCCASIONALLY. GET MED ATTN
IMMED. SPILL PROC:CHAMBER/ABSORB W/VERMICULITE, DRY SAND,
EARTH/SIMILAR MATL FOR DISP AS HAZ WASTE IN RCRA APPRVD FACILITY.
DO NOT FL USH TO SEWER.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>313F,>156C
Vapor Pres:5 @ 25C
Vapor Density:4.8
Spec Gravity:0.79
Evaporation Rate & Reference:0.08 (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR, COLORLESS LIQUID, KEROSENE-LIKE ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON DIOXIDE & CARBON MONOXIDE MAY
FORM WHEN HEATED TO DECOMPOSITION.
==================== Disposal Considerations ====================
Waste Disposal Methods:ENSURE COMPLIANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
MARBLE DRESSING, G41641
| 64741-65-7 |
|
MARBLE CLEANER, G41441
| 7722-88-5
1330-72-7 |
|
#6E LACQUER THINNER
| 64742-89-8
108-88-3
67-64-1
78-93-3
67-56-1 |
|
KX-P4410 KX-89C BLACK TONER FOR KX-P4430
| 25787-47-9
1317-61-9
25085-53-4 |
|
KX-P4410 X2 BLACK DEVELOP FOR KX-P4430
| 1317-61-9 |
|
PT-CRE (ETCH) PART A
| 7722-84-1 |
|
PT-CRE (ETCH) PART B
| 77-92-9
7758-99-8 |
|
SELECTRON TIN (ALK) SOLUTION, SPS5950
| 21651-19-4
107-15-3 |
|
L97426, 0674036, PREPARED PLATE MEDIA (SUPP DATA)
| 57-50-1 |
|
SUSCEPTIBILITY TEST DISCS, L31321, 0410127
| 1406-05-9 |
|
135 LOW FLASH CONTACT CEMENT
| 108-88-3
67-64-1
110-54-3 |
|
KX-P453(KX-72 BLACK TONER FOR UF-766)
| 25767-47-9
1317-61-9
25085-53-4 |
|
SX TONER
| 1333-86-4
1332-37-2 |
|
F-V-S FLEA FOGGER/210
| 71-55-6
74-98-6 |
|
SUPER CALSTIK
| 1317-65-3
1344-09-8
9003-55-8
13463-67-7 |
|
AQUAPRIMER SURFACER WHITE, 882
| 1336-21-6
13463-67-7
7727-43-7
1863-63-4
111-76-2
112-34-5
85-68-7 |
|
ACME APPLICATOR FORMULA TRIMEC WEED-NO-MORE, 885
| 94-74-6
93-65-2
1918-00-9
124-40-3 |
|
OXYGEN CELL GEL
| 1310-58-3
6381-92-6
107-21-1 |
|
SALT SOLUTION
| 7732-18-5
7447-40-7
7757-79-1
139-33-3 |
|
MAGNOLIA CHEMICAL HYDRATED LIME
| |
|
PRO-LINK ANTISEPTIC LOTION CLEANSER, MH312
| 151-21-3
88-04-0 |
|
PRO-LINK ANTISEPTIC LOTION CLEANSER, MH312C
| 151-21-3
88-04-0 |
|
AROCLOR 1242 MIX, 32009
| 110-54-3
53469-21-9 |
|
AROCLOR 1242 MIX, 32009-500
| 110-54-3
53469-21-9 |
|
AROCLOR 1242 MIX, 32109
| 110-54-3
53469-21-9 |
|
GRIT-O'COBS
| |
|
LITE-R-COBS
| |
|
DRI-ZORB
| |
|
NU-KLAD,114A RESIN
| 7727-43-7
25068-38-6
14808-60-7
26447-14-3
13463-67-7
98-00-0 |
|
LOCQUIC PRIMER T 7471,19267
| 67-64-1
67-63-0
3077-12-1
149-30-4 |
|
PETRO OIL, 4053-1000
| 64741-96-4 |
|
STODDARD SOLVENT
| 8052-41-3 |
|
OXYGEN, CW50
| 7782-44-7 |
|
VACTAN
| 1401-55-4 |
|
BIO-DRAIN
| 9002-93-1 |
|
DASCO ADDITIVE AFW-P
| 126-73-8 |
|
PEEL AWAY 7
| 1119-40-0
627-93-0
872-50-4
1332-58-7 |
|
ANTIBACTERIAL CLEAN & SMOOTH
| |
|
G-100-SA (SEAM ADHESIVE)
| 108-88-3
64741-84-0
67-64-1 |
|
SORBITAL GM
| 9004-34-6 |
|
TF SOLVENT
| 76-13-1
124-38-9 |
|
SCCO RUST ARRESTING COMPOUND
| |
|
STANDARD STOCK SUSPENSION, 8052
| 7632-04-4
50-00-0 |
|
DASCOOL 2003
| 64742-53-6
64742-52-5
111-42-2 |
|
ACRYL SET LIQUID POLYMER, 04000
| |
|
COLD SEAL
| 9016-00-6
12001-26-2 |
|
WHITE OIL, 7494
| 8042-47-5 |
|
GREASE CURE II, 3001
| 92-52-4
67-63-0 |
|
SPRED ULTRA-LATEX SEMI-GLOSS ENAMEL-PURE WHITE, 8200
| 57-55-6
1332-58-7
108-05-4
13463-67-7
25035-69-2
25067-01-0
7732-18-5 |
|
SEMI GLOSS ENAMEL SNOW SHADOW, 5990W
| 13463-67-7
25265-77-4
1336-21-6
107-21-1 |
|
|