===================== Product Identification =====================
MSDS NAME:SUPERMIL GREASE NO.A-72832.
NIIN:00-110-4499
MSDS Number: BCYYV
=== Responsible Party ===
Company:AMOCO OIL COMPANY
Emergency Phone Num:(312)856-5371
CAGE:15958
=== Contractor Identification ===
Company:AMOCO OIL CO
Address:200 E RANDOLPH DR
Box:City:CHICAGO
State:IL
ZIP:60601-6401
Country:US
Phone:312-856-3907- EM HLTH: 800 447-8735
CAGE:15958
============= Composition/Information on Ingredients =============
Name:DIESTER OIL (TAKE TLV AS OIL MIST)
ACGIH TLV:5MG/CUM(OILMIST
Name:LITHIUM SOAP THICKENER
CAS:4485-12-5
RTECS #:WI4370000
ACGIH TLV:NOT SPECIFIED
===================== Hazards Identification =====================
Effects of Overexposure:PER MFR,NONE ILL EFFECTS EXPECTED,MAY IRRITATE
EYES,SKIN OR RESPIRATORY TRACT ON PROLONGED CONTACT.
======================= First Aid Measures =======================
First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.
===================== Fire Fighting Measures =====================
Extinguishing Media:DRY CHEMICAL (B-C),CO*2,WATERFOG,FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN AN ENCLOSED
AREA.
Unusual Fire/Explosion Hazard:NONE NOTED
================== Accidental Release Measures ==================
Spill Release Procedures:USE PROPER PERSONAL PROTECTION;REMOVE ALL
IGNITION SOURCES & CONTAIN;USE ABSORBENT MATERIAL AND
RECOVER/PROPER DISPOSAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL,DRY AND VENTILATED
AREA.AVOID OPEN FLAMES/SPARKS.KEEP CONTAINER CLOSED WHEN NOT IN
USE.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES.DO NOT BREATHE
MIST/VAPORS.WASH THOROUGHLY AFTER EACH USE.DO NOT USE CONTAMINATED
CLOTHES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED SCBA/OR RESPIRATOR FOR
ORGANIC VAPOR/MIST>TL
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
MSDS REVISED:AUGUST 1981:9150-00-110-4499 IS CANCELLED AS OF 68292;AND
REPLACED BY 9150-00-985-7243
================== Physical/Chemical Properties ==================
HCC:V6
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LAVENDER COLORED,SMOOTH TEXTURED GREASE.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HIGH TEMP,OPEN FLAMES,SPARKS
Hazardous Decomposition Products:NONE NOTE BY THE MFR
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|