===================== Product Identification =====================
MSDS NAME:BOSTIK 400-3 BASE X-304 & CA-118 CATALYST
NIIN:00-107-2269
MSDS Number: BCYXB
=== Responsible Party ===
Company:AKZO COATINGS INC
Address:434 W. MEATS STREET
City:ORANGE
State:CA
ZIP:92661
Country:US
Info Phone Num:714-637-1750
Emergency Phone Num:714-637-1750; CHEMTREC 800-424-9300
CAGE:98502
=== Contractor Identification ===
Company:AKZO COATINGS INC
Address:434 W. MEATS STREET
Box:City:ORANGE
State:CA
ZIP:92661
Country:US
Phone:714-637-1750; CHEMTREC 800-424-9300
CAGE:98502
============= Composition/Information on Ingredients =============
Name:HYDROCARBON SOLVENTS (XYLENE, TOLUENE, MEK, MIBK, MNBK,
N-BUTYL ALCOHOL, BUTYL
Fraction by Wt: 49.7%
ACGIH TLV:100-200PPM
Name:CELLOSOLVE, ISOPROPYL ALCOHOL)
Fraction by Wt: _
ACGIH TLV:_
Name:EPOXY RESIN
Fraction by Wt: 24.3%
Name:AMINE CURING AGENT
Fraction by Wt: 4%
===================== Hazards Identification =====================
Effects of Overexposure:BREATHING VAPOR WILL BE IRRITATING TO NOSE &
THROAT. MAY CAUSE NAUSEA AND VOMITING.
======================= First Aid Measures =======================
First Aid:SKIN: WASH AFFECTED AREA WITH SOAP & WATER. EYES: FLUSH WITH
WATER. CONSULT PHYSICIAN. INHALATION: REMOVE VICTIM TO FRESH AIR.
CONSULT PHYSICIAN. INGESTION: INDUCE VOMITING. CONSULT PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point:23F, T.C.C.
Lower Limits:1.1
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL; ALCOHOL-TYPE FOAM
Fire Fighting Procedures:WATER MAY USED AS FINE SPRAY TO ABSORB HEAT
Unusual Fire/Explosion Hazard:DO NOT APPLY TO HEATED SURFACES OR IN
AREAS WHERE ELECTRICAL SPARKS MAY BE PRESENT.
================== Accidental Release Measures ==================
Spill Release Procedures:ABSORB MATERIAL WITH SAWDUST OR OIL ABSORBING
COMPOUND. WASH AREA WITH DETERGENT ANDATER. USE ADEQUATE
VENTILATION TO CLEAR FUMES FROM AREA. AVOID SPARKS.
====================== Handling and Storage ======================
Other Precautions:STORE UNDER 100F.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:AIR SUPPLIED RESPIRATOR OR SUITABLE CHEMICAL
CARTRIDGE
Ventilation:FRESH AIR REQUIREMENTS WILL BE 18,000-20,000 CFM
Protective Gloves:SOLVENT RESISTN
Eye Protection:GOGGLES OR FACE SHIELD
Other Protective Equipment:COVERALLS, APRON, NON-SPARKING TOOLS.
Supplemental Safety and Health
ALSO CONTAINS SUSPENSION AND FLOW CONTROL ADDITIVES, 20% COLOR PIGMENT.
================== Physical/Chemical Properties ==================
HCC:F2
Boiling Pt:B.P. Text:170-340F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:STORAGE AT HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE, COMBUST. PRODUCTS OF
VARIOUS PIGMENTS
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE WITH CARE. SANITARY LAND FILL
PREFERRED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|