LD50 LC50 Mixture:ORAL LD50 (RAT): >1600 MG/KG (SEE SUPP)
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MILD-MODERATE IRRITATION. SKIN:
MAY BE ABSORBED THROUGH SKIN. MAY CAUSE ALLERGIC SENSITIZATION TO
SENSITIVE INDIVIDUALS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION.
Medical Cond Aggravated by Exposure:ALLERGIES, ECZEMA, SKIN CONDITION.
======================= First Aid Measures =======================
Eyes: FLUSH W/WATER FOR 15 MINS. SKIN: WASH W/SOAP & WATER.
INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE VOMITING.
OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:TOC
Flash Point:300F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR SCBA & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:NONE
Spill Release Procedures:ABSORB ON INERT MATERIAL & DISCARD IN SUITABLE
CONTAINERS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE.
Other Precautions:WEAR ADEQUATE PROTECTIVE EQUIPMENT IF CURED MATERIAL
IS SANDED/MACHINED.
Respiratory Protection:NONE REQUIRED IN NORMAL USE W/PROPER
VENTILATION.
Ventilation:GENERAL MECHANICAL IS SATISFACTORY. USE LOCAL EXHAUST IF
ODOR IS DISAGREABLE.
Protective Gloves:CHEMICAL RESISTANT RUBBER
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:KEEP HANDS AWAY FROM EYES WHEN HANDLING
MATERIAL/BEFORE WASHING AFTER USE. WASH THOROUGHLY BEFORE
EATING/SMOKING.
Supplemental Safety and Health
ORAL LD50 INFORMATION IS FOR DIMETHYLAMINOMETHYLPHENOL.
Vapor Pres:0
Spec Gravity:0.97
pH:9.5
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE PASTE W/SULFUROUS ODOR
Percent Volatiles by Volume:100/WT
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXTREME HEAT/OPEN FLAME.
Hazardous Decomposition Products:OXIDES OF CARBON, SULFUR & NITROGEN.
Conditions to Avoid Polymerization:HEAT IS GENERATED WHEN MIXED W/EPOXY
RESIN. USE CAUTION WHEN MIXING MORE THAN AN OUNCE/SO.
Waste Disposal Methods:DISPOSE OF IN WASTE DISPOSAL FACILITY
IAW/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.