Search   
MSDS  : MIL-L-21260C,LUBE OIL,INTRNL COMBUSTION ENG
CAS  : 8012-95-1
NAME  : mineral oil (exposure regulated as 'oil mist')
lubrizol 1165
zinc diakyl dithiophosphate (a part of additive in
zinc diaryl dithiophosphate(a part of additive in lubrizol)
===================== Product Identification =====================

MSDS NAME:MIL-L-21260C,LUBE OIL,INTRNL COMBUSTION ENG
NIIN:00-111-0214
MSDS Number: BCZBM
=== Responsible Party ===
Company:BATTENFELD-AMERICAN,INC
Emergency Phone Num:716 695 2100
CAGE:JO766
=== Contractor Identification ===
Company:BATTENFELD-AMERICAN,INC.
CAGE:JO766
Company:WITCO CORP GOLDEN BEAR DIVISION
Address:10100 SANTA MONICA BLVD SUITE 1470
City:LOS ANGELES
State:CA
ZIP:90067
Country:US
Phone:805-393-7110
CAGE:07750

============= Composition/Information on Ingredients =============

Name:MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')
CAS:8012-95-1
RTECS #:PY8030000
Fraction by Wt: 89.0%
OSHA PEL:5 MG/M3
ACGIH TLV:5 MG/M3/10 STEL;9192

Name:LUBRIZOL 1165
Fraction by Wt: 11.9%

Name:ZINC DIAKYL DITHIOPHOSPHATE (A PART OF ADDITIVE IN
LUBRIZOL)

Name:ZINC DIARYL DITHIOPHOSPHATE(A PART OF ADDITIVE IN LUBRIZOL)

===================== Hazards Identification =====================

Effects of Overexposure:NONE NOTED BY MFR. LOW TOXICITY & LOW HAZARD TO
HEALTH.

======================= First Aid Measures =======================

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

===================== Fire Fighting Measures =====================

Flash Point:400F/205C (OC)
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG,APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.

================== Accidental Release Measures ==================

Spill Release Procedures:ELIMINATE IGNITION SOURCES. STOP LEAK.
EVACUATE AREA.DO NOT TOUCH SPILLAGE. SM SPILL:ABSORB W. INERT
ABSORBENT. PLACE IN CLOSED CONTAINER. FLUSH AREA W. WATER. LG
SPILL: DIKE AHEAD FOR LATER DISPOSAL. NOTIFY AUTHORITIES.

====================== Handling and Storage ======================

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENTILATED
AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT. KEEP
CONTAINERS TIGHTLY CLOSED
Other Precautions:AVOID BREATHING MIST.

============= Exposure Controls/Personal Protection =============

Respiratory Protection:DUST/MIST RESPIR
Ventilation:NO SPECIAL REQUIREMENTS W ADEQUATE VENT.
Protective Gloves:PLASTIC
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:NORMAL WORK CLOTHING COVERING ARMS & LEGS.
Supplemental Safety and Health
MSDS FM MFR DATED:4/84; ITEM IS OF MIL-L-21260C,MILITARY SYMBOL PE
50-1,GRADE 50,TYPE 11

================== Physical/Chemical Properties ==================

HCC:V6
Boiling Pt:B.P. Text:700C
Vapor Pres:.01
Vapor Density:0.1
Spec Gravity:0.89
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FLUID OIL-BLEND(LIQUID)

================= Stability and Reactivity Data =================

Stability Indicator/Materials to Avoid:YES
NOT KNOWN
Stability Condition to Avoid:AVOID IGNITION SOURCES
Hazardous Decomposition Products:CO IF INCOMPLETE COMBUSTION

==================== Disposal Considerations ====================

Waste Disposal Methods:ELIMINATE IGNITION SOURCES. DESTROY BY LIQUID
INCINERATION. INCINERATION WILL BE EASIER BY MIXING WITH A MORE
FLAMMABLE SOLVENT. HANDLE & DISPOSE IN FULL COMPLIANCE WITH ALL
APPLICABLE INTERNATIONAL,F ED,STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

*** END OF RECORD ***
Search More   
ALL PAGES On Chemical Property IN THIS GROUP
NAMECAS
140 3450,FIRST DEVLPR REPL,PROC E-4 PART A 7757-83-7
497-19-8
123-31-9
55-55-1
140 3450,FIRST DEVLPR,PROC E-4,PART B 7732-18-5
1310-73-2
540-72-7
7647-15-6
146 4825,DEVL D-76,PART A (PRE 10/85) 123-31-9
55-55-1
55-55-1
1330-43-4
1303-86-2
146 4825,DEVL D-76,PART B (PRE 10/85) 7757-83-7
1330-43-4
140-01-2
169 1757 SEPIA TONER,PART A (BLEACH BATH),KAN 354573 7758-02-3
13746-66-2
169 1757 SEPIA TONER,PART B (TONING BATH),KAN 531859 1313-84-4
3140 RTV COATING
INNERBOND 1440 CLEAR 9016-00-6
DOW CORNING(R) 3140 RTV COATING 68909-20-6
1185-55-3
URALANE 8267 (NEW FORMULA) 8032-32-4
OP3570 1336-36-3
OP540 1336-36-3
MIL-L-21260C,LUBE OIL,INTRNL COMBUSTION ENG 8012-95-1
60476-10W LUBRICATING OIL, MIL-L-21260-10W 64742-65-0
MIL-L-21260C,GRADE 10,LUBRICATING OIL
TECTYL 873-SAE 10
TECTYL 930 64742-65-0
MIL-L-21260C,GRADE30.
60476-30W LUBRICATING OIL, MIL-L-21260-30W 64742-65-0
MIL-L-21260C GRADE 30
MIL-L-21260C,GRADE 30,LUBRICATING OIL,PETRL
SC 844 0085
MIL-L-21260C; LUBRICATING OIL
MIL-L-21260C,GRADE 50,LUBRICATING OIL,ENGIN
MIL-L-21260C,LUBE OIL,INTRNL COMBUSTION ENG 8012-95-1
MIL-L-21260C,GRADE 50,LUBRICATING OIL,ENGIN
45F1094FB 1336-36-3
3040711 1336-36-3
200P209 1336-36-3
49F4347 1336-36-3
37A6608 1336-36-3
MOTOR OIL-PRESERVATIVE 60,476-10 64742-65-0
MIL-L-21260C GRADE 10,LUBRICATING OIL 64742-65-0
TECTYL 873-SAE 10
49F6251 1336-36-3
CALCIUM CARBONATE, 471-34-1
CALCIUM CARBONATE 471-34-1
CALCIUM CARBONATE 471-34-1
CALCIUM CARBONATE, CAT #4052 1317-65-3
229-49A 75-71-8
75-69-4
150 RPD 1332-21-4
PHENOLIC 1332-21-4
AI-1037 7440-02-0
7429-90-5
METEC 4010C 7440-02-0
7429-90-5
TEMPTEC 18903 7440-02-0
7429-90-5
ROYCO 751 1330-78-5
88-24-4
BRACO MICRONIC 883 115-86-6
SYNFLUID TS-803
EMERY 2853 MIL-H-46170,HYDRAULIC FLUID TY I
ROYCO 751 78-30-8
95-14-7
25619-56-1

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com| Ads link:todaystock.net