===================== Product Identification =====================
MSDS NAME:FA-1013 ACCELERATOR
NIIN:00N057535
MSDS Number: BWQVK
=== Responsible Party ===
Company:CLIFTON ADHESIVE INC
Address:BURGESS PLACE
City:WAYNE
State:NJ
ZIP:07470
Country:US
Info Phone Num:201-694-0845
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:79833
=== Contractor Identification ===
Company:CLIFTON ADHESIVE INC
Address:BURGESS PL
Box:City:WAYNE
State:NJ
ZIP:07470
Country:US
Phone:201-694-0845; 973-694-0845
CAGE:79833
============= Composition/Information on Ingredients =============
Name:METHANOL
CAS:67-56-1
RTECS #:PC1400000
Fraction by Wt: 76%
OSHA PEL:N/K
ACGIH TLV:N/K
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:TRIMENE BASE; (ALIPHATIC AMINE)
CAS:63512-71-0
OSHA PEL:N/K
ACGIH TLV:N/K
Name:VOLATILE ORGANIC SUBSTANCES: 5.37 #/GAL, 0.642 KG/LITER
RTECS #:9999999VO
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:NAUSEA AND/OR NARCOSIS.
CHRONIC:MAY DAMAGE LIVER. TARGET ORGANS:METHANOL-MAY CAUSE LIVER,
KIDNEY, EYE, LUNG, SPLEEN, BRAIN OR NERVOUS SYSTEM DAMAGE, BASED ON
ANIMAL DATA. SYMPS OF EXPOS:IRRITATI ON TO EYES AND MUCOUS
MEMBRANES. CAN ALSO CAUSE SKIN DRYNESS AND CRACKING. CAN CAUSE
BLINDNESS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:RESPIRATORY AILMENTS AND LIVER
AILMENTS.
======================= First Aid Measures =======================
First Aid:UTILIZE SUGGESTED METHODS BELOW. IN EMERGENCY SITUATIONS
NOTIFY A PHYSICIAN IMMEDIATELY. SKIN:WASH WITH SOAP AND WATER. GET
MEDICAL ATTENTION. EYES:FLUSH ABUNDENTLY WITH CLEAN WATER FOR AT
LEAST 15 MI NUTES AND REFER TO PHYSICIAN. INGESTION:INDUCE
VOMITING. REFER TO PHYICIAN. INHALATION:REMOVE PATIENT TO FRESH AIR
OR GIVE OXYGEN. USE CPR IF PATIENT IS NOT BREATHING. REFER TO
PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:54.0F,12.2C
Lower Limits:5.5%
Upper Limits:36.5%
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL PROT
EQUIPMENT . USE WATER SPRAY TO COOL FIRE EXPOSED TO STRUCTURES &
DISPERSE VAP CLOUD IF FIRE IS NOT PRESENT.
Unusual Fire/Explosion Hazard:VAPOR IS HEAVIER THAN AIR AND MAY TRAVEL
CONSIDERABLE DISTANCE TO SOURCE OF IGNITION AND FLASHBACK.
================== Accidental Release Measures ==================
Spill Release Procedures:ABSORB SPILL IN SAND, EARTH, VERMICULITE,
OIL-DRI OR SOL-SPEED-DRI. SHOVEL ABSORBED MATERIAL INTO STEEL
CONTAINER AND COVER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN APPROVED SOLVENT STORAGE
AREA. KEEP TIGHTLY CLOSED. KEEP AWAY FROM HEAT, OPEN FLAMES, SPARKS
HOT SURFACES AND OXIDIZING AGENTS.
Other Precautions:NOT APPLICABLE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MSHA APPROVED ATMOSPHERE SUPPLYING OR
AIR PURIFYING RESPIRATOR FOR ORGANIC VAPROS AS REQUIRED TO MAINTAIN
EXPOSURE LEVELS BELOW RECOMMENDED LIMITS.
Ventilation:LOC EXHST:REMOVE VAPS DURING PROCESSING. MECH
EXHST:EXPLO-PROOF EQUIP. SPECIAL:REDUCE VAP CONCS BELOW SPECIFIED
LIMS.
Protective Gloves:PVA GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:PROTECTIVE CLOTHING AS REQUIRED TO PREVENT
SKIN CONTACT. ANSI APPROVED EYEWASH FOUNTAIN AND DELUGE SHOWER .
Work Hygienic Practices:KEEP AREA CLEAN. CLEAN UP SPILLS IMMEDIATELY.
PRACTICE GOOD PERSONAL HYGIENE.
Supplemental Safety and Health
VP:97.7 @ 68F,20C.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:147F,64C
Vapor Pres:SUPP DATA
Vapor Density:1.11
Spec Gravity:0.851
Appearance and Odor:AMBER. PUNGENT AMINE ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NOT APPLICABLE.
Stability Condition to Avoid:AVOID STRONG ACIDS, HEAT, OPEN FLAMES,
SPARKS, HOT SURFACES AND OXIDIZING AGENTS.
Hazardous Decomposition Products:AMMONIA. HYDORGEN CHLORIDE.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL CHEMICAL AND SOLVENT WASTE DISPOSAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
ZAP-A-GAP
| 7085-85-0
9011-14-7 |
|
ZIP KICKER
| 71-55-6
99-97-8 |
|
MAGNESIUM SULFATE, 6046
| 10034-99-8
7487-88-9 |
|
FR-251-A
| 25068-38-6
5026-74-4
28064-14-4 |
|
TORUS 2E
| 72490-01-8
1330-20-7
107-98-2 |
|
ALUMINUM OXIDE C
| 1344-28-1 |
|
FORMULA 33 ICE & SNOW MELT COMP
| 10043-52-4
7647-14-5
7447-40-7
10476-85-4
7732-18-5 |
|
PLAST 9, ACETONE
| 67-64-1 |
|
ITCH-AWAY
| 14807-96-6 |
|
LONBRIGHT
| 111-77-3
78-51-3 |
|
CASTROL 5299
| 64742-52-5
64742-53-6
68920-70-7 |
|
PRO-LINE 1000-EXTREME HIGH GLOSS-DELUXE (SUPDAT)
| 8032-32-4
1330-20-7
108-88-3
121888-68-4
133-07-3
13463-67-7
61788-76-9
8052-41-3
1330-20-7
64742-88-7
8032-32-4 |
|
AO 4903 UNSANDED MORTAR
| 65997-15-1
14808-60-7 |
|
25 MRO
| 7439-95-4
10022-31-8 |
|
USA BATH, 512
| |
|
IBM, PHOTO CHEM, ELECTROPHOTOGRAPHIC TONERS
| 1333-86-4
60676-86-0
63148-65-2 |
|
DEICER 8243D
| 107-21-1
7732-18-5 |
|
F089
| 109-60-4
108-88-3 |
|
W45W702, DO-IT BEST EXTERIOR OIL/ALKYD WOOD (SUPDAT)
| 64742-89-8
64742-47-8
14807-96-6
13463-67-7 |
|
HELOXY MODIFIER 8, 42646
| 68609-97-2
106-89-8 |
|
ROYALITE WEATHERABLE/ABS SHEET - ROYALITE 84/ABS
| 9003-56-9
9003-54-7
25034-71-3
25038-36-2
64754-90-1 |
|
HEATING OIL 0.2% S, 063010-00753
| 68476-30-2 |
|
DYNASOLVE 165
| 75-09-2
64-19-7
64-18-6
27176-87-0 |
|
PERMALITE BLOCKFILL
| 93763-70-3
14808-60-7 |
|
COE-RECT LIQUID, PART A
| 80-62-6
64-17-5
67-56-1
84-74-2 |
|
COE-RECT POWDER, PART B
| 94-36-0
84-74-2 |
|
OXYGEN GAS, GOX; NITROGEN GAS, GN2
| 7782-44-7
7727-37-9 |
|
MP ATF, DEXTRON-III/MERCON, 33-123
| 64741-89-5
64741-88-4 |
|
TRAFFIC PAINT - JET BLACK, 7305
| 64742-88-7
108-88-3
64742-89-8 |
|
DIISOBUTYL KETONE, SPC 19060
| 108-83-8
19549-80-5 |
|
CLOVER SILICON CARBIDE GREASE MIX - ALL GRADES, 51840
| 64742-52-5
409-21-2
112945-52-5 |
|
FINISH RUB, CR 712-6
| 1317-95-9
8008-20-6
61790-12-3
8002-09-3 |
|
ACETIC ACID GLACIAL REAGENT
| 64-19-7 |
|
NEISSERIA KWIK
| |
|
DIAMALLOY 3003NS
| 7440-44-0
7440-02-0
7440-47-3 |
|
NO 2 ZINC DIE CAST ALLOY
| 7440-66-6
7429-90-5
7440-50-8
7439-95-4
7439-92-1
7440-43-9
7439-89-6 |
|
EDTA TITRANT VOLUMETRIC SOLUTIONS
| 139-33-3 |
|
HOPPE'S 9 LUBRICATING OIL
| 8012-95-1 |
|
FA-1013 ACCELERATOR
| 67-56-1
63512-71-0 |
|
8100 RESPIRATOR WIPE
| 67-63-0
7732-18-5 |
|
GACOFLEX A-57 SERIES
| 34590-94-8 |
|
SV 1747 BLACK SILICONE PASTE, SV 01747
| 68186-91-4
70131-67-8 |
|
460A H.S. PRIMER/ACTV, 460 HSPAC
| 68246-02-8
1330-20-7 |
|
FG TONER CANON LASER PRINTER I & II
| 25153-46-2
25767-47-9
9017-48-5
84179-66-8
1317-61-9
112945-52-5
557-05-1 |
|
LANGE 16-8-8
| 57-13-6
1317-65-3 |
|
EZ WELD BLUE SEAL PVC SOLVENT CEMENT
| 109-99-9
78-93-3
67-64-1 |
|
AN/PDR-43 RADIAC SET
| |
|
OX-O-SOLV, DC-30
| 108-83-8
141-78-6
68477-31-6
8008-20-6
111-76-2 |
|
HYDRECON 186 ES
| 66402-68-4
65997-16-2
60676-50-0
1332-69-0
14808-60-7 |
|
LEMON OIL
| 64475-85-0
64741-88-4 |
|
|