===================== Product Identification =====================
MSDS NAME:DIAMALLOY 3003NS
NIIN:00N057521
MSDS Number: BWQTY
=== Responsible Party ===
Company:METCO PERKIN-ELMER
Address:1101 PROSPECT AVE
Box:1006
City:WESTBURY
State:NY
ZIP:11590-0201
Country:US
Info Phone Num:516-334-1300
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:FO877
=== Contractor Identification ===
Company:METCO INC, SUB OF THE PERKIN-ELMER CORP
Address:1101 PROSPECT AVENUE
Box:City:WESTBURY
State:NY
ZIP:11590-2724
Country:US
Phone:516-334-1300
CAGE:39918
Company:METCO PERKIN-ELMER
Address:1101 PROSPECT AVENUE
Box:1006
City:WESTBURY
State:NY
ZIP:11590-0201
Phone:(516) 334-1300
CAGE:FO877
============= Composition/Information on Ingredients =============
Name:GRAPHITE, SYNTHETIC; (CARBON)
CAS:7440-44-0
RTECS #:FF5250100
Fraction by Wt: 9.5%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:2 MG/M3 TDUST
Name:NICKEL (SARA 313) (CERCLA)
CAS:7440-02-0
RTECS #:QR5950000
Fraction by Wt: 23%
OSHA PEL:1 MG/M3
ACGIH TLV:1 MG/M3
Name:CHROMIUM (SARA 313) (CERCLA)
CAS:7440-47-3
RTECS #:GB4200000
Fraction by Wt: 67%
OSHA PEL:1 MG/M3
ACGIH TLV:0.5 MG/M3
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB
Name:SUPDAT:DIFFICULTY BREATHING. INGESTION:POSSIBLE IRRITATION.
RTECS #:9999999ZZ
Name:PROT GLOVES:DURING PLASMA SPRAY PROCESS. RUBBER/OTHER
APPROP GLOVES MAY BE WORN AS NEC DURING OTHER PHASES OF (ING 6)
RTECS #:9999999ZZ
Name:ING 5:PRODUCT HANDLING TO AVOID EXCESSIVE SKIN CONTACT.
RTECS #:9999999ZZ
Name:OTHER PROT EQUIP:GUIDELINES). AN ALUMINIZED APRON SHOULD BE
WORN DURING PLASMA SPRAY PROCESS. OTHER APPROP PROT (ING 8)
RTECS #:9999999ZZ
Name:ING 7:CLTHG MAY BE WORN AS NEC DURING PROD HNDLG TO AVOID
CONT W/SKIN. EYE WASH STATION(S) IS/ARE RECOM. WASH (ING 9)
RTECS #:9999999ZZ
Name:ING 8:FACILITIES ARE RECOMMENDED.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:CARBON:HAZ BY INHAL & EYE CONT. MAY
CAUSE IRRIT TO UPPER RESP TRACT & EYES. TARGET ORGAN(S):UPPER RESP
TRACT, EYES. NICKEL:HAZ BY INHAL & SKIN CONT. INHAL MAY CAUSE
CANCERS OF LUNG & NASAL SINUSES. SK IN CONT MAY CAUSE DERM. TARGET
ORGAN(S):LUNGS, SKIN. CHROMIUM:HAZ BY INHAL & SKIN CONT. INHAL MAY
CAUSE(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NICKEL:IARC MONOGRAPHS ON EVAL OF CARCIN
RISK OF CHEMS TO MAN, VOL 49, PG 257, 1990:GROUP 2B. NTP 7TH ANNUAL
(SUP DAT)
Effects of Overexposure:HLTH HAZS:PNEUM & MUCOUS MEMBRANE
IRRIT/ULCERATION. SKIN CONT MAY CAUSE DERM, SENSIT/CHROME LESIONS.
PORTION OF METALLIC CHROMIUM MAY BE CONVERTED DURING THERMAL SPRAY
PROCESS TO HEXAVALENT CHROMIUM. EXPOS TO HEXAVALENT CHROMIUM MAY
CAUSE BRONCHOGENIC LUNG & STOM CANCERS. TARGET ORGAN(S):LUNGS,
SKIN.(SUPDAT)
Medical Cond Aggravated by Exposure:RESPIRATORY CONDITION AND
DERMATITIS. CONSULT A PHYSICIAN.
======================= First Aid Measures =======================
Eyes:FLUSH WITH SUFFICIENT AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. IF IRRITATION PERSISTS, CONSULT A PHYSICIAN. SKIN:WASH
AFFECTED AREA WITH SOAP AND WATER. IF IRRITATION/DERMATITIS
PERSISTS, CONSUL T A PHYSICIAN. INHALATION:EXPOSE TO FRESH AIR.
CONSULT A PHYSICIAN IF IRRITATION OR RESPIRATORY DISTRESS PERSISTS.
INGESTION:CONSULT A PHYSICIAN.
===================== Fire Fighting Measures =====================
Extinguishing Media:CLASS D FIRE EXTINGUISHER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . TREAT AS A METALLIC FIRE.
Unusual Fire/Explosion Hazard:FINE METAL DUSTS ARE FLAM & MAY EXPLODE
WHEN EXPOSED TO HEAT, FLAME/OXIDIZERS. NICKEL & CHROMIUM WHEN
HEATED MAY REACT W/WATER/STEAM TO PRDCE FLAMMABLE (SUPDAT)
================== Accidental Release Measures ==================
Spill Release Procedures:VACUUM LOOSE POWDER ONLY WITH VACUUMS EQUIPPED
WITH HEPA FILTRATION. WET WIPE AREA CLEAN. DO NOT DRY SWEEP. AVOID
GENERATING AIRBORNE DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE AWAY FROM INCOMPATIBLES. STORE
PROD CNTNRS IN WELL VENT, CLEAN, COOL, DRY AREA. STORE IN MANNER TO
MINIMIZE PUNCTURES & BREAKAGE OF CNTNRS.
Other Precautions:AVOID CONTACT OF MATERIAL WITH WATER OR OXIDIZERS.
AVOID INHALATION, PROLONGED OR REPEATED SKIN CONTACT OR CONTACT
WITH EYES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPRVD RESP WITH FILTER CARTRIDGES
APPRVD FOR DUST/FUMES/MISTS SHOULD BE WORN AT ALL TIMES DURING
THERMAL SPRAY PROCESS TO PROT OPERATOR FROM EXPOS TO DUST & FUMES.
RESPS MAY ALSO BE WORN W HEN PROD HNDLG GENERATES DUST.
Ventilation:USE ONLY WITH THE ADEQUATE LOCAL VENTILATION PROVIDED.
Protective Gloves:ALUMINIZED GLOVES ARE TO BE WORN (ING 5)
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EAR PROT MUST BE WORN WHEN OPERATOR IS
SUBJECTED TO EXCESSIVE NOISE LEVELS. (REFER TO APPROP REGULATORY
(ING 7)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZS:HYDROGEN GAS. DUST MAY IGNITE EXPOSIVELY. EXPLAN OF
CARCIN:RPT ON CARCINS, 1994:ANTIC TO BE CARCIN. HUMAN:LUNGS, NASAL
CAVITIES. EFTS OF OVEREXP:SIGNS & SYMPTOMS:EYE:IRRITATION.
SKIN:IRRITA TION, DERMATITIS. INHAL:IRRITATION, PNEUMOCONIOSIS,
COUGH, (ING 4)
================== Physical/Chemical Properties ==================
Solubility in Water:NEGATIVE
Appearance and Odor:POWDER, NO ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZERS, ACIDS, SULFUR.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OZONE & NITRIC ACID ARE FORMED BY
PLASMA FLAME (SIMILAR TO WELDING FUMES). THIS ACTION IS INDEPENDENT
OF METAL POWDER.
==================== Disposal Considerations ====================
Waste Disposal Methods:EMPTY PRODUCT CONTAINERS, PRODUCT WASTE AND
CLEANING MEDIA SHOULD BE STORED AND DISPOSED OF ACCORDING TO THE
APPROPRIATE LOCAL, STATE AND FEDERAL REGULATORY GUIDELINES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
ZAP-A-GAP
| 7085-85-0
9011-14-7 |
|
ZIP KICKER
| 71-55-6
99-97-8 |
|
MAGNESIUM SULFATE, 6046
| 10034-99-8
7487-88-9 |
|
FR-251-A
| 25068-38-6
5026-74-4
28064-14-4 |
|
TORUS 2E
| 72490-01-8
1330-20-7
107-98-2 |
|
ALUMINUM OXIDE C
| 1344-28-1 |
|
FORMULA 33 ICE & SNOW MELT COMP
| 10043-52-4
7647-14-5
7447-40-7
10476-85-4
7732-18-5 |
|
PLAST 9, ACETONE
| 67-64-1 |
|
ITCH-AWAY
| 14807-96-6 |
|
LONBRIGHT
| 111-77-3
78-51-3 |
|
CASTROL 5299
| 64742-52-5
64742-53-6
68920-70-7 |
|
PRO-LINE 1000-EXTREME HIGH GLOSS-DELUXE (SUPDAT)
| 8032-32-4
1330-20-7
108-88-3
121888-68-4
133-07-3
13463-67-7
61788-76-9
8052-41-3
1330-20-7
64742-88-7
8032-32-4 |
|
AO 4903 UNSANDED MORTAR
| 65997-15-1
14808-60-7 |
|
25 MRO
| 7439-95-4
10022-31-8 |
|
USA BATH, 512
| |
|
IBM, PHOTO CHEM, ELECTROPHOTOGRAPHIC TONERS
| 1333-86-4
60676-86-0
63148-65-2 |
|
DEICER 8243D
| 107-21-1
7732-18-5 |
|
F089
| 109-60-4
108-88-3 |
|
W45W702, DO-IT BEST EXTERIOR OIL/ALKYD WOOD (SUPDAT)
| 64742-89-8
64742-47-8
14807-96-6
13463-67-7 |
|
HELOXY MODIFIER 8, 42646
| 68609-97-2
106-89-8 |
|
ROYALITE WEATHERABLE/ABS SHEET - ROYALITE 84/ABS
| 9003-56-9
9003-54-7
25034-71-3
25038-36-2
64754-90-1 |
|
HEATING OIL 0.2% S, 063010-00753
| 68476-30-2 |
|
DYNASOLVE 165
| 75-09-2
64-19-7
64-18-6
27176-87-0 |
|
PERMALITE BLOCKFILL
| 93763-70-3
14808-60-7 |
|
COE-RECT LIQUID, PART A
| 80-62-6
64-17-5
67-56-1
84-74-2 |
|
COE-RECT POWDER, PART B
| 94-36-0
84-74-2 |
|
OXYGEN GAS, GOX; NITROGEN GAS, GN2
| 7782-44-7
7727-37-9 |
|
MP ATF, DEXTRON-III/MERCON, 33-123
| 64741-89-5
64741-88-4 |
|
TRAFFIC PAINT - JET BLACK, 7305
| 64742-88-7
108-88-3
64742-89-8 |
|
DIISOBUTYL KETONE, SPC 19060
| 108-83-8
19549-80-5 |
|
CLOVER SILICON CARBIDE GREASE MIX - ALL GRADES, 51840
| 64742-52-5
409-21-2
112945-52-5 |
|
FINISH RUB, CR 712-6
| 1317-95-9
8008-20-6
61790-12-3
8002-09-3 |
|
ACETIC ACID GLACIAL REAGENT
| 64-19-7 |
|
NEISSERIA KWIK
| |
|
DIAMALLOY 3003NS
| 7440-44-0
7440-02-0
7440-47-3 |
|
NO 2 ZINC DIE CAST ALLOY
| 7440-66-6
7429-90-5
7440-50-8
7439-95-4
7439-92-1
7440-43-9
7439-89-6 |
|
EDTA TITRANT VOLUMETRIC SOLUTIONS
| 139-33-3 |
|
HOPPE'S 9 LUBRICATING OIL
| 8012-95-1 |
|
FA-1013 ACCELERATOR
| 67-56-1
63512-71-0 |
|
8100 RESPIRATOR WIPE
| 67-63-0
7732-18-5 |
|
GACOFLEX A-57 SERIES
| 34590-94-8 |
|
SV 1747 BLACK SILICONE PASTE, SV 01747
| 68186-91-4
70131-67-8 |
|
460A H.S. PRIMER/ACTV, 460 HSPAC
| 68246-02-8
1330-20-7 |
|
FG TONER CANON LASER PRINTER I & II
| 25153-46-2
25767-47-9
9017-48-5
84179-66-8
1317-61-9
112945-52-5
557-05-1 |
|
LANGE 16-8-8
| 57-13-6
1317-65-3 |
|
EZ WELD BLUE SEAL PVC SOLVENT CEMENT
| 109-99-9
78-93-3
67-64-1 |
|
AN/PDR-43 RADIAC SET
| |
|
OX-O-SOLV, DC-30
| 108-83-8
141-78-6
68477-31-6
8008-20-6
111-76-2 |
|
HYDRECON 186 ES
| 66402-68-4
65997-16-2
60676-50-0
1332-69-0
14808-60-7 |
|
LEMON OIL
| 64475-85-0
64741-88-4 |
|
|