===================== Product Identification =====================
MSDS NAME:U-20 PART A
NIIN:00-141-7958
Kit Part:Y
MSDS Number: BDBQM
=== Responsible Party ===
Company:WESTPAC PRODUCTS CO INC
Emergency Phone Num:415-632-3778
CAGE:4Z694
=== Contractor Identification ===
Company:WESTPAC PRODUCTS CO INC
Address:106 HEGENBERGER LOOP
Box:City:OAKLAND
State:CA
ZIP:94621-1326
Country:US
CAGE:4Z694
============= Composition/Information on Ingredients =============
Fraction by Wt: 93%
Fraction by Wt: 7%
===================== Hazards Identification =====================
Effects of Overexposure:SKIN & EYES:POSSIBLE IRRIT,SENSITIZATION.
======================= First Aid Measures =======================
First Aid:SKIN:WASH IMMEDIATELY W/ SOAP & WATER.EYES:FLUSH W/ WATER FOR
15 MIN,CALL MD.INGEST:INDUCE VOMITING.
===================== Fire Fighting Measures =====================
Flash Point:340F,171C CC
Extinguishing Media:DRY CHEMICAL,CO*2,FOAM
Fire Fighting Procedures:USE SCBA
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARD.AVOID OPEN FLAME &
ELECTRICAL SPARKS.
================== Accidental Release Measures ==================
Spill Release Procedures:ABSRB W/ INERT MATERIAL.SWEEP OR SCOOP UP &
PUT IN DISPOSAL CONTAINER.FLUSH AREA W/ WATER.PREVENT WASHINGS FROM
ENTERING WATERWAYS.
====================== Handling and Storage ======================
Handling and Storage Precautions:USE ONLY W/ ADEQUATE VENT.AVOID
BREATHING VAP,MIST,OR SPRAY.AVOID CONTACT W/
EYES,SKIN,CLOTHING.EASH AFTER HANDLING.FOR INDUSTRIAL USE ONLY.
Other Precautions:WASH CLOTHES BEFORE REUSE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NIOSH/MSHA APPR RESP IN CONFINED AREAS.
Ventilation:LOCAL EXHAUST PREFERABLE,MECHANICAL ACCETABLE
Protective Gloves:CLOTH
Eye Protection:SPLASH PROOF GOGGLES
Other Protective Equipment:ADEQUATE CLOTHING TO PROTECT SKIN.
Supplemental Safety and Health
MSDS PREP:87040.PART A OF A 3-PART KIT.SPEC DATA:TYPE 1.KEY1:N1.
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:1.126
Evaporation Rate & Reference:<1(BUTYL ACETATE)
Solubility in Water:INSOLUBLE
Appearance and Odor:LOW VISCOSITY,MILKY WHITE LIQUID,MILD ODOR
Percent Volatiles by Volume:NIL
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AMINES,STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CO,CO*2,TOXIC CHLORINE CMPDS.
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN LANDFILL IN
ACCORDANCE W/ FEDERAL,STATE,& LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
IB NO 2654
| 108-88-3
75-09-2 |
|
1701, BRIGHT GOLD, SPRAY PAINT
| 108-88-3
75-09-2 |
|
KRYLON INT/EXT ENAMEL, 1901 REGAL BLUE
| 71-36-3
78-93-3
1330-20-7
108-88-3
67-64-1
74-98-6
108-10-1
108-65-6 |
|
KRYLON INTERIOR/EXTER ENAMEL AEROSOL 1901
| 67-64-1
74-98-6
108-10-1
108-88-3
111-15-9 |
|
LACQUER, AEROSOL 16099 GRAY
| 108-88-3
1330-20-7
75-09-2 |
|
DRO48-CONCENTRATE
| 108-88-3
1330-20-7
78-93-3
111-76-2 |
|
MOLYLUBE 503 GREASE
| 8012-95-1
1317-33-5 |
|
PLASTILUBE MOLY 3
| 12656-85-8
8012-95-1 |
|
PLASTILUBE MOLY 3
| 8012-95-1
1317-33-5 |
|
SAT-T-POL II
| |
|
8131 FORMULA
| 8002-74-2
7732-18-5 |
|
TRISODIUM PHOSPHATE ANHYDROUS
| 7601-54-9 |
|
TRISODIUM PHOSPHATE ANHYDROUS
| 7601-54-9 |
|
SODIUM PHOSPHATE,TRIBASIC
| 10101-89-0 |
|
TRISODIUM PHOSPHATE ANHYDROUS
| 7601-54-9 |
|
TPO-403, MED CHROME YELLOW, 7B
| 8001-26-1
8030-30-6 |
|
METOL
| 55-55-1 |
|
GLACIAL ACETIC ACID
| 64-19-7 |
|
ACETIC ACID,ETHANOIC ACID,METHANE CARBOXYLI
| 64-19-7 |
|
ACETIC ACID
| 64-19-7 |
|
VINEGAR ACID
| 64-19-7 |
|
AQUA AMMONIA,AMMONIA LIQUOR
| |
|
ROYCO 13D
| |
|
SUPERMIL ASU GREASE NO 31052
| |
|
ROYCO 13D
| 63148-52-7
116-14-3
25619-56-1
71011-25-1
7775-11-3 |
|
SUPERMIL GREASE NO. 1371
| |
|
LR-7132C OLIVE DRAB WW TYPE II 34087
| 8030-30-6
123-86-4
108-88-3
8030-30-6
110-69-0 |
|
LR-7605D LIGHT GRAY W W TYPE I #38440
| 64475-85-0
8030-30-6
123-86-4
110-69-0 |
|
GS-7128-G.LT GULL GREY,36440,WALKWAY TYPE 2
| 8030-30-6
96-29-7 |
|
WALKWAY COMPOUND, GRAY 36440
| 13463-67-7
14808-60-7
1480-96-6
64742-89-8 |
|
U-20 PART A
| |
|
U-20 PART B
| |
|
U-20 AGGREGATES
| 14808-60-7 |
|
SOLDERING FLUX
| 64-17-5 |
|
STA-SILV 15
| 7440-22-4
7440-50-8
7723-14-0 |
|
YELLOW 23531, 787-305, LACQUER CAMOFLAGE
| 7758-97-6
110-19-0
78-83-1
1330-20-7
108-88-3 |
|
GS-7126B BLACK,37038 WALKWAY COMPOUND,TY2
| 8030-30-6
1332-21-4
111-76-2
123-86-4
8030-30-6 |
|
GS-7126-G,BLK 37038 WLKWAY,TYPE 2(ROUGH)
| 8032-32-4
96-29-7 |
|
WALKWAY COMPOUND TYPE II BLACK 37038
| 61790-53-2
1333-86-4
8030-30-6
14807-96-6 |
|
BRACO MICRONIC 759
| 115-86-6 |
|
WITCH HAZEL
| |
|
FLUORO-FINDER FC-44 CLEANER
| 71-55-6
124-38-9 |
|
9 PR 551/K 410 C AEROSOL
| 71-55-6
74-98-6
75-28-5
106-97-8
75-65-0 |
|
CHLOROTHENE
| 71-55-6
124-38-9 |
|
SKC-NF/ZC-7 CLEANER/REMOVER(PER 6/88)
| 71-55-6
124-38-9 |
|
SKC-NF/ZC-7B CLEANER/REMOVR(SEE SUPPL DATA)
| 71-55-6
124-38-9
123-91-1 |
|
TURCO DY-CHEK REMOVER #3 PSV
| 76-13-1
124-38-9 |
|
PETROLEUM DISTILLATES
| 8002-05-9 |
|
R-501 REMOVER
| 71-55-6 |
|
#1033
| 108-88-3 |
|
|