===================== Product Identification =====================
MSDS NAME:OS-20 SOLVENT, MCC-DC2
NIIN:00N061679
MSDS Number: BYBCN
=== Responsible Party ===
Company:MICROCARE CORP
Address:34 RONZO RD
City:BRISTOL
State:CT
ZIP:06010
Country:US
Info Phone Num:201-585-7912
Emergency Phone Num:201-585-7912
CAGE:JO079
=== Contractor Identification ===
Company:MICROCARE CORP
Address:34 RONZO RD
Box:City:BRISTOL
State:CT
ZIP:06010
Country:US
Phone:201-585-7912
CAGE:JO079
============= Composition/Information on Ingredients =============
Name:POLYDIMETHYLSILOXANE, CONTAINING INGREDIENT 2
CAS:107-51-7
Fraction by Wt: 90%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:2-PROPANOL- 1-PROPOXY-; (OCTAMETHYLCYCLOTETRASILOXANE)
CAS:1569-01-3
RTECS #:UB9351000
OSHA PEL:N/K
ACGIH TLV:N/K
Name:1,1,1,2-TETRAFLUOROETHANE
CAS:811-97-2
Fraction by Wt: 10%
OSHA PEL:N/K
ACGIH TLV:N/K
Name:SPILL PROC: MATERIAL INTO DRUMS AND CLOSE. DO NOT FLUSH TO
SEWER.
RTECS #:9999999ZZ
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: DIRECT CONT MAY CAUSE
TEMPORARY DISCOMFORT W/MILD REDNESS & DRYNESS SIMILAR TO WINDBURN.
NOTE: LAB RODENTS REPEATEDLY EXPOSED TO
OCTAMETHYLCYCLOTETRASILOXANE & DECAMETHYLCYCLOPENTASILOXAN E BY
INHAL/INGEST DEVELOPED INCR LIVER WTS AS COMPARED TO UNEXPOSED CTL
ANIMALS. EFT WAS REVERSIBLE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: WHEN DOSING WAS STOPPED AFTER 90
DAYS. THE ABOVE LISTED POTENTIAL EFTS OF OVEREXP ARE BASED ON
ACTUAL DATA, RSLT OF STUDIES PERFORMED UPON SIMILAR COMPOSITIONS,
COMPONENT DATA &/EXPERT REVIE W OF PROD. OVEREXP TO ANY CHEM MAY
RSLTIN ENHANCEMENT OF PREEXISTING ADVERSE MED CNDTNS & ALLERGIC
RXNS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:INHAL: NO FIRST AID SHOULD BE NEEDED. REMOVE TO FRESH AIR.
SUPPORT BRTHG (GIVE OXYGEN/ARTF RESP) . EYES: PERS W/CONT LENSES
SHOULD WEAR CHEM PROT SFTY GLASSES WHEN USING THIS PROD. FLUSH
W/WATER FOR AT LEAST 15 MIN, LIFTING EYELIDS OCCASNLY UNTIL NO
EVIDENCE OF CHEM REMAINS. SKIN: WASH PROMPTLY W/SOAP & WATER FOR AT
LEAST 15 MIN. REMOVE & WASH CONTAM CLTHG & SHOES BEFORE REUSE. (SUP
DAT)
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:94.0F,34.4C
Extinguishing Media:USE DRY CHEM, "ALCOHOL" FOAM/CARBON DIOXIDE. WATER
MAY BE INEFFECTIVE BUT SHOULD BE USED TO KEEP FIRE-EXPOS CONTRS
COOL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT . KEEP CONTAINERS COOL WITH WATER SPRAY. KEEP
PERSONNEL REMOVED AND UPWIND OF SPILL.
Unusual Fire/Explosion Hazard:FLAM LIQ. CONTRS GENERATE PRESS WHEN
HEATED CAUSING VIOLENT BURSTING & DANGEROUS PROPELLING OF CONTR.
VAPS FORM FROM THIS PROD & MAY TRAVEL/BE MOVED (SUP DAT)
================== Accidental Release Measures ==================
Spill Release Procedures:IN EVENT OF SPILL/LEAK, EVACUATE AREA, ABSORB
SPILLED LIQ W/COMMERCIAL NON-FLAM ABSORB, I.E. SAND, VERMICULITE.
REMOVE UNPROT PERS. PROT PERS SHOULD REMOVE IGNIT SOURCES & SHUT
OFF FIRE SOURCES. PROVI DE VENT. SHOVEL (SPARK PROOF) ABSORB (ING
4)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID BREATHING VAPORS. USE ONLY WITH
ADEQUATE VENTILATION.
Other Precautions:WARNING: FLAMMABLE LIQUID. AVOID LIGHTED CIGARETTES,
FLAME, SPARKS, WELDING OR HOT SPOTS WHICH MAY IGNITE LIQUID OR
VAPORS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE REQUIRED IN VENTILATED WORK AREAS. USE
NIOSH/MSHA APPROVED SCBA OR SUPPLIED AIR RESPIRATORS FOR
EMERGENCIES AND IN SITUATIONS WHERE AIR MAY BE DISPLACED BY VAPORS.
Ventilation:LOCAL EXHAUST: FOR POORLY VENTILATED WORK AREAS.
MECHANICAL: ADEQUATE FOR STORAGE.
Protective Gloves:BUTYL GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:PROT CLOTH FOR PRLNG OR RPTD CONT.NEOPRENE
PREF.ANSI APPRVD EYEWASH & DELUGE SHOWER MEETING ANSI DESIGN
CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ: BY AIR CURRENTS & IGNITED BY PILOT LIGHTS, OTHER FLAMES,
SPARKS, HEATERS, ELEC EQUIP, STATIC DISCHARGES/OTHER IGNIT SOURCES
AT LOCATIONS DISTANT FROM PROD HNDLG POINT. HAZ DECOMP PROD: TRAC
ES OF FORMALDEHYDE MAY FORM IF HEATED IN AIR ABOVE 300F/149C. FIRST
AID PROC: INGEST: CALL MD IMMED .
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:300F,149C
Vapor Pres:<5 @ 77F
Vapor Density:>1
Spec Gravity:0.814 (H*2O=1)
Solubility in Water:<0.1%
Appearance and Odor:CLEAR AND COLORLESS LIQUID, WITH VERY LITTLE ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID CONCENTRATED NITRIC ACID & SULFURIC ACIDS, STRONG OXIDIZERS,
ALDEHYDES, ACETYL CHLORIDE, HALOGENS & HALOGEN CMPDS.
Stability Condition to Avoid:HEAT, SPARKS, FLAMES.
Hazardous Decomposition Products:BURNING MAY PRODUCE SILICON DIOXIDE &
CARBON DIOXIDE, & TRACES OF INCOMPLETELY BURNED CARBON PRODUCTS.
(SUP DAT)
==================== Disposal Considerations ====================
Waste Disposal Methods:COMPLY WITH FEDERAL, STATE, AND LOCAL
REGULATIONS. CONSULT APPROPRIATE REGULATORY AGENCY PRIOR TO
DISPOSAL OR DISCHARGE OF WASTE MATERIAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|
| ALL PAGES On Chemical Property IN THIS GROUP
| | NAME | CAS |
|
ANTIOXIDANT 2246 POWDER
| 119-47-1 |
|
STA-SMOOTH
| 10034-76-1
14807-96-6
12001-26-2
14808-60-7 |
|
TONER CARTRIDGE
| 31714-55-3
1317-61-9
54-21-7
112945-52-5
57-11-4
25153-46-2
9003-07-9 |
|
INDUSTRIAL SOLVENT SPRAY A35-71C
| 71-55-6
67-63-0
124-38-9 |
|
PRESTO BLACK ACTIVATOR PBA, 5801--
| 7447-39-4
13933-17-0
7647-01-0
7664-38-2
7732-18-5 |
|
CHLORIDE ACIDIFIER SOLUTION, A-2005
| 7697-37-2
7732-18-5 |
|
CHLORIDE NORMALIZER SOLUTION, A-2003
| 490-79-9
107-21-1 |
|
2-HEPTANONE, 98%, 12336-6
| 110-43-0 |
|
1,6-DIISOCYANATOHEXANE, 98%, D12470-2
| 822-06-0 |
|
CS-IP STRONG BASE ANION EXCHANGE RESIN, 00-1705-05
| 69011-19-4
7732-18-5 |
|
00-1560-01, CH-1 CULLEX STRONG ACID CATION (SUPDAT)
| 69011-22-9
7732-18-5 |
|
MT TONER, RP609Z
| 25153-46-2
1333-86-4
32517-36-5
9003-07-0 |
|
MT STARTER, RP609Z
| 1317-54-0
109909-27-5
1333-86-4
112945-52-5
25153-46-2
1333-86-4
112945-52-5 |
|
4050 PP EXT S/F U.P. WHITE, 405-I
| 57-55-6 |
|
3400 PP INT S/G WHITE BASE, 3400-L
| 57-55-6 |
|
GEMINI-C
| 13463-67-7
1317-65-3
1312-76-1
7440-47-3
7439-98-7
7440-02-0
7439-89-6
7440-33-7
7440-48-4 |
|
NEPTUNE-MIG
| 7429-90-5
7440-47-3
7440-21-3 |
|
TARTAN-TIG
| 7439-89-6
7439-96-5
7440-21-3
7440-50-8 |
|
VDX DRY LUBRICANT SPRAY, MCC-VDX
| 811-97-2
67-63-0
79070-11-4
65530-85-0 |
|
OS-20 SOLVENT, MCC-DC2
| 107-51-7
1569-01-3
811-97-2 |
|
MULTICLEAN, MCC-MLC
| |
|
HYPERCLEAN SOLVENT, MCC-HYP
| 1717-00-6
67-63-0
67-56-1
75-52-5
811-97-2 |
|
DIAMALLOY 2003
| 12070-12-1
7440-48-4 |
|
DIAMALLOY 3007
| 7440-47-3
1333-86-4
7440-02-0 |
|
METCO 307NS
| 7440-02-0
7440-48-4
7440-44-0 |
|
SPEED SET 2000
| 1310-58-3
108-88-3 |
|
9634, EASY LIVING SATIN WALL & TRIM PAINT, (SUPDAT)
| 14808-60-7
13463-67-7 |
|
EL-323-TC RESIN
| 25085-99-8
65997-17-3
1344-28-1 |
|
RAW LINSEED OIL, 1010
| 8001-26-1 |
|
ONE COMPONENT STRUCTURAL ADHESIVE, C4-211
| 25068-38-6
106-89-8
9046-10-0
112945-52-5 |
|
DYE, VAT YELLOW 4, 961110
| 128-66-5 |
|
BARGE S.S. THINNER, P5687A1
| 141-78-6
108-88-3
64742-89-8 |
|
AUTOBAHN ANTIFREEZE
| 1330-43-4
107-21-1
111-46-6
75-21-8 |
|
MERCURY SPILL CLEAN-UP KIT, 4439
| 7440-44-0
7440-66-6
7553-56-2
5329-14-6 |
|
TERRAZZO M BASECOAT RESIN, COMP C
| 2238-07-5 |
|
TURCO 1270-5, 03562
| 100-51-6
6834-92-0
7732-18-5
9002-93-1
9003-04-7 |
|
DA-9 DENATURED ALCOHOL, 483-0628 8A-150-3
| 64-17-5
67-56-1
141-78-6 |
|
X17
| 68609-36-9
67-64-1
1330-20-7 |
|
CITRIC ACID, ANHYDROUS, USP
| 77-92-9 |
|
SPS 5900 TIN ACID SOLUTION
| 7440-31-5
16872-11-0 |
|
LIQUID ARGON
| |
|
10 ALUMINUM BRAZING ALLOY
| |
|
OPC DRUM FROM FT5433/5733, A0699510
| |
|
MOBILITH SHC 007
| 1310-66-3
7620-77-1
64601-11-2
64601-12-3
68783-36-8 |
|
DIAMALLOY 2005NS
| 12070-12-1
7440-48-4
7439-89-6 |
|
CONACURE EA-87 HARDENER
| 9046-10-0
108-95-2
84852-15-3
140-31-8 |
|
UNLEADED GASOLINE, 35014-00
| 8006-61-9
71-43-2
108-88-3
1330-20-7
95-63-6
100-41-4
1634-04-4
78-00-2 |
|
CYANOACRYLATE 7430, 0023010
| 7085-85-0 |
|
CYANOACRYLATE ACCELERATOR
| 64742-49-0 |
|
PERMALITE
| 93763-70-3
14808-60-7 |
|
|