===================== Product Identification =====================
MSDS NAME:EPOCAST 9633(HARDENER)
NIIN:00-180-6028
MSDS Number: BDFZH
=== Responsible Party ===
Emergency Phone Num:213-247-6210
CAGE:GO766
=== Contractor Identification ===
Company:CIBA SPECIALTY CHEMICALS CORP, N. A. / PERFORMANCE
POLYMERS
Address:5121 SAN FERNANDO RD WEST
Box:City:LOS ANGELES
State:CA
ZIP:90039-1011
Country:US
Phone:818-247-6210/800-873-1138
CAGE:99384
CAGE:GO766
============= Composition/Information on Ingredients =============
Name:POLY IMIDAZOLINE
Fraction by Wt: 100%
===================== Hazards Identification =====================
Effects of Overexposure:EYE:IRRITNT;SKIN:NO EFFECT KNOWN/REPORTED.
======================= First Aid Measures =======================
First Aid:INHALE:REMOVE TO FRESH AIR,GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE
MOUTH;GET MEDICAL ATTENTION FOR EYES,BREATHING DIFFICULTY,OR OTHER
SYMPTOMS OF OVEREXPOSURE.
===================== Fire Fighting Measures =====================
Flash Point:>350F,>176C(COC)
Extinguishing Media:WATER, FOAM, OR DRY CHEMICAL POWDER.
Fire Fighting Procedures:USE WATER SPRAY TO COOL CONT, KNOCK-DOWN
VAPORS. WEAR SCBA.
Unusual Fire/Explosion Hazard:MATL MAY/MAY NOT BURN. CONTAINER MAY
EXPLODE IN HEAT OF FIRE.FIRE MAY YIELD TOXIC GASES.
================== Accidental Release Measures ==================
Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W/COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:MAINTAIN STRICT HYGIENE,AVOID PHYSICAL CONTACT,
REMOVE & WASH CONTAMINATED CLOTHING. MFG SUGGESTS USE OF PROTECTIVE
SKIN CREAMS. EXHAUST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
EXTREMES.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
PART B OF 2 PART PRODUCT. THIS PART IS HARDENER. MSDS FOR PART
A,RESIN,NOT RECEIVED. MSDS FROM MFG DATED 11/1/74.
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:>400F,>204C
Spec Gravity:0.95
Solubility in Water:SLIGHT
Appearance and Odor:THICK AMBER LIQUID;CHARACTERISTIC AMINE ODOR.
Percent Volatiles by Volume:0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
ACIDS, PEROXIDES
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:AMINE FRAGMENTS
==================== Disposal Considerations ====================
Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING
DISPOSAL.HANDLE DISPOSE FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE AND LOCAL REGULATIONS. MFG SUGGESTS
INCINERATION OR BURY IN APPROVED LANDFILL ,WASH RESIDUE W/DETERGENT
& H*2O.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|