===================== Product Identification =====================
MSDS NAME:ARMSTRONG RESIN C-7.
NIIN:00-180-6200
Kit Part:Y
MSDS Number: BDGBQ
=== Responsible Party ===
Company:ARMSTRONG PRODUCTS CO.
Emergency Phone Num:219-267-3226
CAGE:DO043
=== Contractor Identification ===
Company:ARMSTRONG PRODUCTS CO
Box:647
City:WARSAW
State:IN
ZIP:46580
Phone:219-267-3226 OR 219-267-5375
CAGE:DO043
Company:MORTON THIOKOL,INC;ARMSTRONG PRODUCTS COMPANY
Address:407-ARGONNE ROAD
Box:647
City:WARSAW
State:IN
ZIP:46580-3811
Country:US
Phone:219-267-3226
CAGE:98911
============= Composition/Information on Ingredients =============
Name:NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
===================== Hazards Identification =====================
Effects of Overexposure:PRIMARY IRRIT OF SKIN-ONPROLNG OR REPEATED
CONTACT.MINOR TRANSIENT IRRIT TO EYE CONTCT-NO CORNEA INJ
======================= First Aid Measures =======================
First Aid:REMOVE FR SKIN W/WATER OR WATERLESS SKIN CLEANER.REMOV CONTAM
CLOTHNG & WASH BEFORE REUSE.EYES:FLSH EYES,IF ANY ILL EFFCTS
DEVEL,GET MED ATTN.INHAL:REMOV PERSON TO FRESH AIR,GET MED
ATTN.INGEST:NOT LI KELY PROB.NO KNOWN ANTIDOTE,TREAT SYST.INDUC
VOMIT
===================== Fire Fighting Measures =====================
Flash Point:480 F COC 249 C
Extinguishing Media:WATER SPRAY, FOAM, CO*2, DRY CHEMICALS
Fire Fighting Procedures:NONE-AVOID BREATHING SMOKE.
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARDS
================== Accidental Release Measures ==================
Spill Release Procedures:CLEAN W/A CLOTH-OBSERVE FIRE HAZARD IF
SOLVENTS ARE USED.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL PLACE. PRACTICE GOOD
AUTION & PERSONAL CLEANLINESS TO AVOID SKIN & EYE CONTACT. AVD
BREATHING VAP OF HEATED MATERIAL
Other Precautions:HANDLE IN ACCORDANCE W/HAZARDOUS POTENTIALITIES OF
THE CURING AGENT WHEN MIXED THEREWITH. SPI CLASSIFICATION 2.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT ORDINARILY REQD
Ventilation:LOC EXHAUST-ONLY IF HEATED,MECHANICAL-NOT ORDINARILY
NEEDED.
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Supplemental Safety and Health
MSDS UNDATED. LD50>2000MG/KG-RAT. CHEM
NAME:4,4ISOPROPYLIDENEDIPHENOL-EPICHLORHYDRIN RESIN.
CHEM.FORMULA:(C*15H*16O*2.C*3H*5C*10)*X.
================== Physical/Chemical Properties ==================
Spec Gravity:1.17
Appearance and Odor:AMBER LIQUID,MILD AROMATIC ODOR
Percent Volatiles by Volume:1.0
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:EXCESS HEATING OVER LONG PERIODS OF TIME
DEGRADES RESIN
Hazardous Decomposition Products:CARBON MONOXIDE,ALDEHYDES ACIDS, ETC.
Conditions to Avoid Polymerization:EXOTHERMS WHEN CURED.
==================== Disposal Considerations ====================
Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|
|