===================== Product Identification =====================
MSDS NAME:MOLDED FRICTION MATERIAL, TMI 66
NIIN:00N068837
MSDS Number: CBJNK
=== Responsible Party ===
Company:TEK-MOTIVE INC
Address:167 COMMERCE ST
City:EAST HAVEN
State:CT
ZIP:06512
Country:US
Info Phone Num:203-468-2224
Emergency Phone Num:203-468-2224
CAGE:JO284
=== Contractor Identification ===
Company:TEK-MOTIVE INC
Address:167 COMMERCE ST
Box:City:EAST HAVEN
State:CT
ZIP:06512
Country:US
Phone:203-468-2224
CAGE:JO284
Company:TEK-MOTIVE, INC.
Address:167 COMMERCE STREET
Box:City:EAST HAVEN
State:CT
ZIP:06512
Country:US
Phone:203-468-2224
CAGE:9U800
============= Composition/Information on Ingredients =============
Name:PHENOL FORMALDEHYDE RESIN; (PHENOLIC RESIN, CASHEW PART.)
CAS:9003-35-4
Fraction by Wt: 12-18%
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:5 MG/M3 (MFR)
Name:FIBROUS GLASS; (FIBER GLASS)
RTECS #:LK3651000
Fraction by Wt: 15-30%
OSHA PEL:10 MG/M3 (MFR)
ACGIH TLV:10 MG/M3 (MFR)
Name:BARIUM SULFATE; (BARYTES AND FILLERS)
CAS:7727-43-7
RTECS #:CR0600000
Fraction by Wt: 20-30%
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST
Name:GRAPHITE (CARBON BLACK, COKE, GRAPHITE)
CAS:7782-42-5
RTECS #:MD9659600
Fraction by Wt: 8-15%
OSHA PEL:15 MPPCF
ACGIH TLV:2 MG/M3 RDUST
Name:SILICA GEL; (SILICA, SILICATES, TALC (CLEAN))
CAS:112945-52-5
RTECS #:VV7310000
Fraction by Wt: 3-10%
OSHA PEL:6 MG/M3
ACGIH TLV:10 MG/M3
Name:WOOD FLOUR AND OTHER FILLERS; (WOOD FLOUR AND FILLERS)
Fraction by Wt: 3-10%
OSHA PEL:1 MG/M3 (MFR)
ACGIH TLV:1 MG/M3 (MFR)
Name:BRASS CHIPS (INCLUDING ING 8-10)
Fraction by Wt: 1-4%
OSHA PEL:10 MG/M3 (MFR)
ACGIH TLV:10 MG/M3 (MFR)
Name:IRON, ION (FE2+); (IRON)
CAS:15438-31-0
RTECS #:NO6925000
OSHA PEL:N/K
ACGIH TLV:N/K
Name:ZINC COMPOUND; (ZINC)
OSHA PEL:N/K
ACGIH TLV:N/K
Name:MAGNESIUM
CAS:7439-95-4
RTECS #:OM2100000
OSHA PEL:N/K
ACGIH TLV:N/K
===================== Hazards Identification =====================
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: WHILE INDIVIDUAL INGS MAY
EXHIBIT DIFFERENT MED PROBLEMS THRU EXCESS DUST INHAL, THESE SAME
INGS PROCESSED INTO FINISHED PROD WILL COLLECTIVELY REACT IN MUCH
THE SAME WAY IF MORE THAN THE OSHA NUISANCE DUST ALLOWANCE IS
EXCEEDED. BRONCHIAL & LUNG IRRIT WILL OCCUR & CONTINUED HIGH EXPOS
MAY RSLT (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: IN SOME TYPE OF PNEUMOCONIOSIS.
REMOVE PERS TO FRESH AIR AREA IF SUBJECTED TO HIGH DUST LEVELS.
CONTINUOUS STRAND FIBER GLASS IS KNOWN TO CAUSE IRRIT OF SKIN &
RESP TRACT. THESE CNDTNS ARE C ONSIDERED TO BE TRANSITORY.
CARDOLITE PARTICLES MADE FROM CASHEW NUT SHELL LIQ CAN ALSO BE
IRRIT BUT WHEN (SUP DAT)
Medical Cond Aggravated by Exposure:CHRONIC BRONCHIAL CONDITIONS WILL
BE AGGRAVATED BY EXCESSIVE DUST.
======================= First Aid Measures =======================
First Aid:SKIN: IRRITATION FROM DUST MAY OCCUR. WASH WELL WITH SOAP AND
WATER. USE A TOPICAL BARRIER CREAM. EYES: FLUSH WITH FRESH WATER
FOR AT LEAST 15 MINUTES TO REMOVE IRRITANT. INGESTION: IF
EXCESSIVE, SEEK IMMEDIATE MEDICAL ASSISTANCE. INHALATION: REMOVE
TO FRESH AIR. SUPPORT BREATHING (GIVE OXYGEN OR ARTIFICIAL
RESPIRATION) .
===================== Fire Fighting Measures =====================
Extinguishing Media:USE WATER, POWDER, FOAM AND CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. MATL IS HARD TO IGNITE, BUT HIGH TEMPS CAN CAUSE AUTO-IGNIT. ANY
METH USED TO CUT-OFF SUPPLY OF (SUP DAT)
Unusual Fire/Explosion Hazard:NONE.
================== Accidental Release Measures ==================
Spill Release Procedures:MINIMIZE THE CREATION OF DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:NO SPECIAL PRECAUTIONS ARE NECESSARY.
DO NOT GRIND, DRILL, OR CREATE DUST WITHOUT AN ADEQUATE DUST
COLLECTION SYSTEM.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR AN APPROPRIATE DUST MASK (NIOSH/MSHA
APPROVED) PARTICULARLY WHEN NUISANCE DUST LEVELS ARE EXCEEDED.
Ventilation:LOCAL EXHAUST SHOULD BE PROVIDED IF MATERIAL IS BEING
GROUNDED, MACHINED, DRILLED/HANDLED AFTER USED AS A BRAKE LINING.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
FIRE FIGHT PROC: OXYGEN WILL SUBDUE FIRE. CNDTNS TO AVOID: FINE FILTER
VACUUM CLEANERS/DUST COLLECTION SYS. EFTS OF OVEREXP: TIGHTLY
BONDED INTO MATRIX OF MATL IT PRESENTS VERY SLIGHT HAZ. MAY CAUSE W
ATERY EYES, HEAVY BRTHG, NAUS.
================== Physical/Chemical Properties ==================
Spec Gravity:1.5-3.5(H*2O=1)
Solubility in Water:NONE
Appearance and Odor:FIBROUS, DARK MATRIX, WITH OR W/OUT BRASS CHIPS &
FIBER GLASS BUNDLES IN SURFAC
Percent Volatiles by Volume:NEG
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:MIN CREATION OF DUST BY GRINDING,
DRILLING/BY-PROD OF WEAR WHEN DOING BRAKE RELINE. USE WET CLEAN-UP
METH, (SUP DAT)
Hazardous Decomposition Products:CARBON MONOXIDE AND A SMALL AMOUNT OF
AMMONIA MAY BE RELEASED AT HIGH TEMPERATURES.
==================== Disposal Considerations ====================
Waste Disposal Methods:USE NORMAL METHODS AS ASSOCIATED WITH THE
DISPOSAL OF PRODUCTS WITH A HIGH GLASS CONTENT. DISPOSE OF IN
ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|