=====================  Product Identification  =====================

MSDS NAME:APCO HARDENER B (FOR USE WITH APCO 5313)
NIIN:00-224-4667
MSDS Number: BDKKM
=== Responsible Party ===
Company:APPLIED PLASTICS CO.,INC
Emergency Phone Num:213-322-8050
CAGE:05866
=== Contractor Identification ===
Company:APPLIED PLASTICS CO
Address:612 E FRANKLIN AVE
Box:City:EL SEGUNDO
State:CA
ZIP:90245
Country:US
CAGE:05866

=============  Composition/Information on Ingredients  =============

Name:ALIPHATIC AMINE
Fraction by Wt: 100%

=====================  Hazards Identification  =====================

Effects of Overexposure:SEVERE SKIN/EYE BURNS. IRRITATION OF
    RESPIRATORY TRACT,MAY CAUSE SENSITIZATION.

=======================  First Aid Measures  =======================

First Aid:EYE: FLUSH WITH WATER 15 MIN,GET IMMED MEDICAL ATTN. SKIN:
    WASH WITH SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION:
    DO NOT INDUCE VOMITIN,FORCE MILK,WATER OR DILUTE VINERGAR & GET
    MEDICAL H ELP IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point:210F/98C (COC)
Extinguishing Media:WATER,DRY CHEMICAL

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE APPROPRIATE SAFETY EQUIPMENT,WASH DOWN
    WITH COPIOUS AMOUNTS OF WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP IN TIGHTLY SEALED CONTAINERS. FOR
    INDUSTRIAL USE ONLY.
Other Precautions:USE GOOD VENTILATION. REMOVE & CLEAN CONTAMINATED
    CLOTHING BEFORE REUSE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
    EXPOSURE OF CONCERN.
Ventilation:LOCAL/GENERAL EXHAUST
Protective Gloves:RUBBER/PLASTIC
Eye Protection:GOGGLES,FACE SHIELD
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT. PAPER
    BENCH COVERS
Supplemental Safety and Health
PART B OF A 2 PART KIT. KEY1:N1.

==================  Physical/Chemical Properties  ==================

HCC:V4
Boiling Pt:B.P. Text:200C/392F
Vapor Pres:0.3
Vapor Density:3.48
Spec Gravity:0.95
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR WATERLIKE LIQUID-AMMONIACAL ODOR
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACIDS,CHLORINATED HYDROCARBONS
Conditions to Avoid Polymerization:MIXING WITH LIQUID EPOXY RESINS IN
    >1 16, MASSES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DILUTE WITH WATER AND CONTAIN. STANDARD
    INDUSTRIAL WASTE DISPOSAL.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***