=====================  Product Identification  =====================

MSDS NAME:MIL-C-372C,CLEANING COMPOUND SOLVENT
NIIN:00-224-6663
MSDS Number: BDKKZ
=== Responsible Party ===
Company:OCTAGON PROCESS INC.
Address:596 RIVER ROAD.
City:EDGEWATER
State:NJ
ZIP:07020
Country:US
Info Phone Num:201-945-9400
Emergency Phone Num:201-945-9400
CAGE:82925
=== Contractor Identification ===
Company:AMERICAN INK AND OIL CORP
Address:33 ENDICOTT STREET
Box:City:NORWOOD
State:MA
ZIP:02062-3006
Country:US
Phone:781-762-0026 / FAX: 781-762-1617
CAGE:82956
Company:OCTAGON PROCESS INC.
Address:596 RIVER ROAD
Box:City:EDGEWATER
State:NJ
ZIP:07020
Country:US
Phone:201-945-9400
CAGE:82925

=============  Composition/Information on Ingredients  =============

Name:PETROLEUM HYDROCARBON
ACGIH TLV:5MG/CUM (OIL MIST)

Name:UNIDENTIFIED COMPONENTS (ADDITIVES)
ACGIH TLV:NOT SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Health Hazards Acute and Chronic:ACUTE: IRRITATING TO SKIN, EYES, &
    MUCOUS MEMBRANES. OVEREXPOSURE XAN CAUSE 'CNS' DEPRESSION.
Effects of Overexposure:EYES: STINGING SENSATI0N TO EYES; SKIN: REDNESS
    OF SKIN; INHAL:'CNA' DEPRESSION EVIDENCED BY HEADACFHE, DIZZINESS
    LOSS OF APPETITE, LOSS OF COORDINATION..
Medical Cond Aggravated by Exposure:NO DATA AVAILABLE

=======================  First Aid Measures  =======================

First Aid:EYES/SKIN: FLUSH W/WATER FOR AT LEAST 15 MINS. GET MEDICAL
    ATTN. IF IRRITATION PERSISTS; INHAL: EREMOVE TO FRESH AIR. TREAT
    SYMPTOMATICALLY; INGEST: ACCIDENT INGESTION- DO NOT INDUCE
    VOMITING. GET IMM EDIATE MEDICAL ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:152F/67C
Lower Limits:0.7
Upper Limits:5.0
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL,OR WATER FOG OR SPRAY.
Fire Fighting Procedures:NORMAL.KEEP FIRE EXPOSED CONTAINERS COOL WITH
    WATER
Unusual Fire/Explosion Hazard:MODERATE WHEN EXPOSED TO HEAT AND FLAME.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE AREA.SHUT OFF IGNITION SOURCES.RECOVER
    FREE LIQUID IF POSSIBLE.SMALL SPILLS CAN BE ABSORBED.LARGE SPILLS
    CAN BE VACUUMED UP & RECOVERED IF POSSIBLE.PLACE IN SUITABLE
    CONTAINER FOR SUBSEQUENT DISP OSAL.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL DRY PLACE.DO NOT HANDLE
    OR STORE NEAR HEAT,SPARKS OR FLAMES.AVOID OXIDANTS LIKE LIQUID
    CHLORINE HYPOCHLORITES OR CONCENTRATED OXYGEN.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES;DO NOT INHALE VAPORS
    AD MIST.WASH THOROUGHLY AFTER EACH USE.DO NOT USE CONTAMINATED
    CLOTHES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN ENCLOSED AREAS, OR WHERE USE CAUSES
    THE'PEL'/TLV TO BE EXCEEDED, A NIOSH APPROVED ORGANIC VAPOR/MIST
    RESPIRATOR SHOULD BE USED, CHECKED W/LOCAL INDUSTRIAL HYGIENE
    OFFICE.
Ventilation:PROVIDE SUFFICIENT GENERAL/LOCAL EXHAUST VENTILATION IN
    PATTERN/VOLUME TO CONTROL INHALATION EXPOSURE BELOW PEL/TLV.
Protective Gloves:IMPERVIOUS TYPE: RUBBER OR NEOPRENE.
Eye Protection:CHEM. SAFETY GOGGLES/FACE SHIELD.
Other Protective Equipment:RUBBER APRON. EYE WASH FOUNTAIN. SAFETY
    SHOWER. (AS REQUIRED FOR TASK AT HAND)
Work Hygienic Practices:WASH HANDS & FACE AFTER USING PRODUCT. LAUNDER
    CONTAMINATED CLOTHING BEFORE RE-USE.
Supplemental Safety and Health
N/R.

==================  Physical/Chemical Properties  ==================

HCC:V4
Boiling Pt:B.P. Text:338F/170C
Vapor Density:4.5
Spec Gravity:0.9
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQ,SLIGHT OILY ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:INCOMPLETELY BURNED CARBON PRODUCTS,
    CO*2, CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:INCINERATE IN APPROVED INCINERATOR OR DISPOSE OF
    IN APPROVED CHEMICAL DUMP IN ACCORDANCE WITH LOCAL,STATE & FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***