=====================  Product Identification  =====================

MSDS NAME:118WS, PROCESS 44CDR-AR COLOR DEVELOPER (SUPDAT)
NIIN:00N070151
MSDS Number: CBLGT
=== Responsible Party ===
Company:MILES INC
Address:100 CHALLENGER RD
City:RIDGEFIELD PARK
State:NJ
ZIP:07660
Country:US
Info Phone Num:201-440-2500
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:MILES
=== Contractor Identification ===
Company:AGFA DIVISION, BAYER CORPORATION
Address:100 CHALLENGER ROAD
Box:City:RIDGEFIELD PARK
State:NJ
ZIP:07660
Country:US
Phone:201-440-2500
CAGE:0P7P7
Company:MILES INC
Address:MOBAY ROAD
City:PITTSBURGH
State:PA
ZIP:15205-9741
Country:US
Phone:800-662-2927
CAGE:MILES

=============  Composition/Information on Ingredients  =============

Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 90-95%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:POTASSIUM SULFITE
CAS:10117-38-1
RTECS #:WT3530000
Fraction by Wt: 1-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYE:MAY CAUSE IRRITATION.
    SKIN:MAY CAUSE IRRITATION. INHALATION:INHALATION OF MIST COULD
    CAUSE RESPIRATORY IRRITATION. INGESTION:MAY CAUSE IRRITATION OF THE
    MUCOUS MEMBRANES OR DIGESTIVE TRACT.  CHRONIC:NONE LISTED BY
    MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes:IMMEDIATELY FLUSH WITH PLENTY OF RUNNING WATER FOR AT
    LEAST 15 MINUTES. OBTAIN MEDICAL ATTENTION. SKIN:FLUSH AFFECTED
    AREAS PROMPTLY WITH WATER FOR 15 MINUTES. REMOVE CONTAMINATED
    CLOTHING. IN CA SE OF CONTINUED IRRITATION CONSULT PHYSICIAN.
    INHAL:FOR OVER-EXPOSURE, REMOVE TO FRESH AIR. INGEST:OBTAIN
    IMMEDIATE MEDICAL ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point:NONCOMBUSTIBLE
Extinguishing Media:ANY APPLICABLE TO PRIMARY CAUSE OF FIRE.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . EVACUATE PERSONNEL TO A SAFE AREA. KEEP PERSONNEL
    REMOVED AND UPWIND OF FIRE.
Unusual Fire/Explosion Hazard:WHEN HEATED TO DECOMPOSITION EMISSION OF
    TOXIC FUMES OF SO*2 IS POSSIBLE. SOME OF THESE MATERIALS MAY BURN
    BUT NONE OF THEM IGNITES READILY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NOTE:REVIEW SECTIONS FIRE FIGHTING MEASURES &
    EXPOS CTLS/PERSONAL PROT BEFORE PROCEEDING W/CLEAN UP. USE APPROP
    PERSONAL PROT EQUIP DURING CLEAN UP. DIKE SPILL. PVNT LIQ FROM
    ENTERING SEWERS, WATERWAY S OR LOW AREAS. SOAK UP WITH SAWDUST,
    (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID EYE AND SKIN CONTACT, AND STORE
    IN WELL-VENTILATED AREA. KEEP CONTAINER TIGHTLY CLOSED.
Other Precautions:DO NOT STORE WITH INCOMPATIBLE MATERIALS (SEE SECTION
    STABILITY AND REACTIVITY).

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE NEEDED WITH WORKING MIXTURES AND NORMAL
    ROOM VENTILATION (10 CHANGES OF AIR PER HOUR). NIOSH/MSHA APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:ROOM VENT IS SUFFICIENT. AVOID USE OF PROD IN UNVENTILATED
    AREAS. ALWAYS CTL AIRBORNE LEVELS BELOW EXPOSURE (SUPDAT)
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:CHEM RESIST APRONS. DISPOSABLE COVERALLS ARE
    OPTIONAL, & DISCARD AFTER USE. ANSI APPRVD EYE WASH & DELUGE SHOWER
    .
Work Hygienic Practices:DO NOT STORE OR CONSUME FOOD, DRINK OR TOBACCO
    IN AREA WHERE THEY MAY BECOME CONTAMINATED WITH THIS MATERIAL.
Supplemental Safety and Health
MFR TRADE NAME/PART NO:REPLENISHER WORKING STRENGTH.
    PH:12.20(REPL)/12.05(DEV). SPILL RELEASE:SAND, OIL DRY OR OTHER
    ABSORBENT MATERIAL. WASTE DISP METH:LANDFILL. DISCHARGE TO SEWER
    REQS APPROVAL OF P ERMITTING AUTHORITY & MAY REQ PRETREATMENT.
    VENT:GUIDELINES WHEN REPORTED IN INGRED SECTION (USE 50% OF THE
    TLV).

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
pH:SUPDAT
Evaporation Rate & Reference:NOT KNOWN
Solubility in Water:100% (BY WEIGHT %)
Appearance and Odor:CLEAR AND LIGHT YELLOW LIQUID, NO ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:OXIDES, CO*2, CO.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISP MUST BE I/A/W FED, STATE & LOC REGS .
    RECOVER NONUSABLE FREE LIQ &/OR CONTAMD WATER, & DISPOSE OF IN
    APPRVD & PERMITTED TREATMENT SYS; INCIN IS REC. REMOVE NONUSABLE
    SOLID MATL &/OR CONTAMD  SOIL, FOR DISP IN APPRVD & PERMITTED
    (SUPDAT)

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***