=====================  Product Identification  =====================

MSDS NAME:INTERIOR TEMPO HIGH GLOSS ACRYLIC ENAMEL, 35000
NIIN:00N071255
MSDS Number: CBNLJ
=== Responsible Party ===
Company:MCCORMICK PAINTS
Address:2355 LEWIS AVE
City:ROCKVILLE
State:MD
ZIP:20851
Country:US
Info Phone Num:301-770-3235
Emergency Phone Num:800-424-9300 (CHEMTREC)
CAGE:0EKH6
=== Contractor Identification ===
Company:MCCORMICK PAINTS
Address:2355 LEWIS AVE
Box:City:ROCKVILLE
State:MD
ZIP:20851
Country:US
Phone:301-770-3235
CAGE:0EKH6

=============  Composition/Information on Ingredients  =============

Name:ETHYLENE GLYCOL (SARA 313) (CERCLA) VP: 0.05
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: <8%
OSHA PEL:N/K 
ACGIH TLV:C 50 PPM, VAPOR
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: VAPORS OR SPRAY
    MISTS MAY BE IRRITATING TO EYES, NOSE, THROAT AND MUCOUS MEMBRANES
    OF THE RESPIRATORY TRACT PRODUCING SYMPTOMS OF HEADACHE AND/OR
    NAUSEA IN POORLY VENTILATED AREAS.	CHRONIC: NONE SPECIFIED BY
    MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN CONTACT: PROLONGED OR REPEATED
    CONTACT WITH COATING MAY CAUSE SKIN IRRITATION. EYE CONTACT: DIRECT
    EYE CONTACT WILL CAUSE EYE IRRITATION.

=======================  First Aid Measures  =======================

First Aid:SKIN: WASH THOROUGHLY WITH SOAP AND WATER. EYES: IMMEDIATELY
    FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES. CONSULT MD.
    INGESTION: IF VICTIM IS CONSCIOUS, GIVE 2 GLASSES OF WATER AND CALL
    MD. INH ALATION: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
    OXYGEN OR ARTIFICIAL RESPIRATION) .

=====================  Fire Fighting Measures  =====================

Extinguishing Media:USE WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN SPILL AND REMOVE WITH INERT MATERIAL
    (SAND, EARTH, ABSORBENT). KEEP SPILL OUT OF SEWERS AND OPEN BODIES
    OF WATER. KEEP UNNECESSARY PEOPLE AWAY, AS FLOOR MAY BE SLIPPERY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE ABOVE 34F AND BELOW 140F. DO NOT
    TAKE INTERNALLY.
Other Precautions:THIS COATING CONTAINS MATLS CLASSIFIED AS NUISANCE
    PARTICULATES, FOR EXAMPLE TITANIUM DIOXIDE, CALCIUM CARBONATE, ETC,
    WHICH MAY BE PRESENT AT HAZ LEVELS ONLY DURING SPRAYING THIS
    COATING OR SANDING O R ABRADING OF THE DRIED FILM.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED
    EXCEPT IF PRODUCT IS SPRAYED, THEN USE MASK (NIOSH/MSHA APPROVED).
    IF TLV IS EXCEEDED THEN USE NIOSH/MSHA APPROVED CANNISTER OR AIR
    HOSE MASK.
Ventilation:MECHANICAL-LOCAL EXHAUST AT POINT OF CONTAMINANT RELEASE
    (VAPOR, MIST OR DUST).
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING BATHROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE ING 1
Vapor Density:LTR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER
Percent Volatiles by Volume:63-70

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ANY MATERIAL THAT REACTS VIOLENTLY WITH WATER.
Stability Condition to Avoid:FREEZING OR TEMPERATURE OVER 140F.
Hazardous Decomposition Products:ACETIC ACID, CARBON MONOXIDE AND
    CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***