=====================  Product Identification  =====================

MSDS NAME:SHINE BASE FLOOR FINISH II, F6251
NIIN:00N072007
MSDS Number: CBPVV
=== Responsible Party ===
Company:AZROCK INDUSTRIES INC
Box:696060
City:SAN ANTONIO
State:TX
ZIP:78269-6060
Country:US
Info Phone Num:512-558-6400
Emergency Phone Num:800-228-5635
CAGE:22112
=== Contractor Identification ===
Company:AZROCK INDUSTRIES INC
Box:City:SAN ANTONIO
State:TX
ZIP:78269-6060
Country:US
Phone:800-228-5635; 512-558-6400
CAGE:22112

=============  Composition/Information on Ingredients  =============

Name:ETHANOL, 2-BUTOXY-, PHOSPHATE; (TRIBUTOXY ETHYL PHOSPHATE)
CAS:78-51-3
RTECS #:KJ9800000
Fraction by Wt: 1-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:ETHANOL, 2-(2-ETHOXYETHOXY)-; (DIETHYLENE GLYCOL MONOETHYL
    ETHER)
CAS:111-90-0
RTECS #:KK8750000
Fraction by Wt: 1-5%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:ZINC AMMONIUM CARBONATE
CAS:38714-47-5
Fraction by Wt: 0.5-2%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:AMMONIUM HYDROXIDE (CERCLA)
CAS:1336-21-6
RTECS #:BQ9625000
Fraction by Wt: <0.5%
OSHA PEL:35 PPM (MFR)
ACGIH TLV:35 PPM (MFR)
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: BALANCE
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:VOLATILE ORGANIC CONTENT: 186 G/L (LESS WATER LESS EXEMPT
    SOLVENT); 56.4 G/L (MATERIAL)
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: DIRECT CONTACT OF PRODUCT WITH
    EYES CAN CAUSE IRRITATION. PROLONGED OR REPEATED CONTACT OF PRODUCT
    WITH SKIN MAY CAUSE RED, DRY, IRRITATED SKIN. CHRONIC: NONE
    SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

Eyes: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. IF IRRITATION
    PERSISTS, SEEK MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER.
    IF IRRITATION PERSISTS, SEEK MEDICAL ATTENTION. INHALATION: REMOVE
    TO FR ESH AIR. INGESTION: IF PRODUCT IS SWALLOWED, DRINK LARGE
    AMOUNTS OF WATER OR MILK AND SEEK MEDICAL AID.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:USE CARBON DIOXIDE, DRY POWDER, OR WATER.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT . USUAL FIRE FIGHTING PROCEDURES MAY BE USED.
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:LARGE QUANTITIES SHOULD BE PICKED UP WITH OIL
    DRY OR EQUIVALENT. SMALL QUANTITIES MAY BE FLUSHED TO THE SEWER
    WITH LARGE QUANTITIES OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL DRY PLACE, WITH
    ADEQUATE VENTILATION. KEEP FROM FREEZING.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. AVOID EYE CONTACT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:GENERAL ROOM VENTILATION ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>200F,>93C
Spec Gravity:1.03 (H*2O=1)
Solubility in Water:INFINITE
Appearance and Odor:MILKY WHITE LIQUID, WITH A MILD ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND ACIDS.
Stability Condition to Avoid:FREEZING, PRODUCT WILL SEPARATE.
Hazardous Decomposition Products:OXIDES OF CARBON.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF LARGE QUANTITIES IN ACCORDANCE WITH
    FEDERAL, STATE, AND LOCAL LAWS AND REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***