=====================  Product Identification  =====================

MSDS NAME:393-00 WHITE, PACON SUPREME EXTERIOR (SUPDAT)
NIIN:00N072037
MSDS Number: CBPXB
=== Responsible Party ===
Company:BRUNING PAINT CO
Address:601 S HAVEN ST
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Info Phone Num:410-342-3641
Emergency Phone Num:410-342-3636
CAGE:EO376
=== Contractor Identification ===
Company:BRUNING PAINT COMPANY
Address:601 S. HAVEN STREET
City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-424-9300(NIGHT)410-342-3636 DAY
CAGE:EO376
Company:KYANIZE PAINT
Address:601 S HAVEN ST
Box:City:BALTIMORE
State:MD
ZIP:21224
Country:US
Phone:800-368-2076
CAGE:85520

=============  Composition/Information on Ingredients  =============

Name:PIGMENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:VOLATILE ORGANIC COMPOUNDS:0.98
RTECS #:9999999VO
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:SUPDAT:IF POSSIBLE, DO NOT LEAVE VICTIM UNATTENDED.
RTECS #:9999999ZZ

Name:RESP PROT:PARTICULATE & GAS & VAP. IN CONFINED AREAS, USE
    (NIOSH APPRVD) AIR LINE TYPE RESPS/HOODS. RESP PROT (ING 5)
RTECS #:9999999ZZ

Name:ING 4:MAY ALSO BE NEC IN ANY LATER MFR OPERATIONS IN WHICH
    THESE PRODS MAY BECOME AIRBORNE IN FORM OF VAPOR/DUST.
RTECS #:9999999ZZ

Name:VENT:RESP TO PVNT OVEREXP. PROVIDE GEN DILUTION/LOC EXHAUST
    VENT IN VOLUME & PATTERN TO KEEP TLV OF MOST HAZ (ING 7)
RTECS #:9999999ZZ

Name:ING 6:INGRED BELOW ACCEPTABLE LIM, LEL IN FIRE & EXPLOSION
    HAZARD SECTION STATED LIM & TO REMOVE DECOMP PRODS (ING 8)
RTECS #:9999999ZZ

Name:ING 7:DURING WELDING OR FLAME CUTTING ON SURFACES COATED
    WITH THESE PRODUCTS.
RTECS #:9999999ZZ

Name:HYGIENE PRACT:PROPERLY LAUNDERED.
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:NONE LISTED BY MANUFACTURER.
    CHRONIC:REPORTS HAVE ASSOCIATED REPEATED & PROLONGED OCCUPATIONAL
    OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN & NERVOUS SYSTEM
    DAMAGE. INTENTIONAL MISUSE BY DELIBE RATELY CONCENTRATING &
    INHALING CONTENTS MAY BE HARMFUL OR FATAL. DO NOT BREATHE VAPORS OR
    SRPAY MIST. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:WEAR AN APPROP, PROPERLY FITTED RESP
    (NIOSH APPRVD) DURING & AFTER APPLICATION UNLESS AIR MONITORING
    DEMONSTRATES VAPOR/MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW
    RESPIRATOR MFR'S DIRECT IONS FOR RESPIRATOR USE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/LUKE WARM WATER FOR AT LEAST 15 MINS. SEEK PHYS
    IMMED. SKIN:FLUSH W/COPIOUS AMTS OF LUKE WARM WATER. REMOVE CONTAMD
    CLTHG PROMPTLY. CONT PHYS IMMED. INHAL:REMOVE EXPOSED INDIVIDUAL TO
    FRES H AIR. CONT PHYS IMMED. INGEST:NEVER GIVE ANYTHING BY MOUTH TO
    UNCON PERSON. IF VICTIM IS CONSCIOUS & ALERT, VOMIT SHOULD BE
    INDUCED FOR INGESTIONS FOR MORE THAN 1 SWALLOW (1-2 TABLESPOONS
    (SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . CNTNRS EXPOSED TO INTENSE HEAT FROM FIRES SHOULD BE
    COOLED W/WATER TO PVNT VAPOR PRESSURE (SUPDAT)
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

==================  Accidental Release Measures  ==================

Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP FROM FREEZING. DO NOT STORE ABOVE
    120F. DO NOT TAKE INTERNALLY.
Other Precautions:CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF THE REACH
    OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN OUTDOOR/OPEN AREAS, USE (NIOSH APPRVD) MECH
    FILTER RESP TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING
    SPRAY APPLIC. IN RESTRICTED VENT AREAS, USE (NIOSH APPRVD)
    CHEM-MECH FILTERS DESIGNED	TO REMOVE COMBINATION OF (ING 4)
Ventilation:USE VENT AS REQD TO CONTROL VAP CONCS. AVOID PRLNGD/RPTD
    BRTHG OF VAPS. IF EXPOS EXCEEDS TLV, USE NIOSH APPRVD (ING 6)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMERGENCY EYE WASH & DELUGE
    SHOWER .
Work Hygienic Practices:WASH HANDS THORO BEFORE EATING & USING
    WASHROOM. REMOVE CONTAMD CLTHG IMMED & DO NOT WEAR IT UNTIL IT HAS
    BEEN (ING 9)
Supplemental Safety and Health
MFR TRADE NAME/PART NO:PIGMENTED LATEX SURFACE CONDITIONER. FIRE FIGHT
    PROC:BUILDUP WHICH COULD RESULT IN CONTAINER RUPTURE. FIRST AID
    PROC:FOR ADULT) PREF W/SYRUP OF IPECAC UNDER DIRECTION FROM PHYS/
    POIS CTR. IF SYRUP OF IPECEC IS NOT AVAIL, VOMIT CAN BE INDUCED BY
    GENTLY PLACING 2 FINGERS INTO BACK OF THROAT. (ING 3)

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17 @ 68F
Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN BUTYL ACETATE
Solubility in Water:NOT KNOWN
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:75.88

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
THESE PRODUCTS ARE INCOMPATIBLE WITH STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRCDE HAZ FUMES WHEN HEATED TO
    DECOMP. FUMES MAY CNTN CARBON MONOXIDE, CARBON DIOXIDE AND OXIDES
    OF NITROGEN.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT FLUSH TO SEWER, WATERSHED OR WATERWAY.
    DISPOSE OF THESE PRODUCTS IN ACCORDANCE WITH APPLICABLE LOCAL,
    COUNTY, STATE AND FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***