=====================  Product Identification  =====================

MSDS NAME:TECTYL 802A
NIIN:00-231-2357
MSDS Number: BDKYP
=== Responsible Party ===
Company:ASHLAND OIL CO
Emergency Phone Num:606-324-1133
CAGE:81355
=== Contractor Identification ===
Company:ASHLAND INC
Address:1409 WINCHESTER AVE
Box:391
City:ASHLAND
State:KY
ZIP:41114
Country:US
Phone:800-622-6846
CAGE:81355

=============  Composition/Information on Ingredients  =============

Name:HEAVY NAPTHENIC DISTILLATE CAS# 64742-52-5		       
			  85-100%
CAS:64742-52-5
RTECS #:PY8035000

=====================  Hazards Identification  =====================

Effects of Overexposure:EYES:MOD IRRIT,TEAR,RED.SKIN:SLIGHT
    IRRIT.INGEST:IRRIT,NAUS,VOMIT,DIARR.INHAL:RESP & NASAL IRRIT.

=======================  First Aid Measures  =======================

First Aid:SKIN:WASH W/ SOAP & WATER.EYE:FLUSH W/ WATER,LIFT LIDS,CALL
    MD.INGEST:IMMED DRINK 2 GLASS WATER & INDUCE VOMIT W/ IPECAC OR
    STICK FINGER DOWN THROAT.INHAL:MOVE TO FRESH AIR,KEEP PERSON WARM &
    QUIET,GI VE O*2 OR ARTIF RESP IF NECESSARY,CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point:>200F,>94C CC
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL
Fire Fighting Procedures:SCBA W/ FULL FACEPIECE
Unusual Fire/Explosion Hazard:WATER OR FOAM CAN CAUSE VIOLENT
    FROTHING,ESP WHEN SPRAYED INTO CNTNRS OF HOT BURNING LIQ(OTHER
    PREC)

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL SPILL:ABSORBON PAPER,VERMICULITE OR
    FLOOR ABSORBENT.LG SPILL:PREVENT RUNOFF TO SEWER OR STREAMS.NOTIFY
    AUTHORITIES,EVACUATE PERSONS W/O PROTECT EQUIP.DIKE SPILL,STOP AT
    SOURCE.PUMP TO SALVAGE TA NK.

======================	Handling and Storage  ======================

Handling and Storage Precautions:EMPTY CONTNRS RETAIN PRODUCT
    RESIDUES(VAP,LIQ,SOLID) WHICH MAY BURN
Other Precautions:NEVER USE WELDING,CUTTING TORCH ON OR NEAR DRUM,EVEN
    WHEN EMPTY BECAUSE PRODUCT OR RESIDUE CAN IGNITE EXPLOSIVELY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD AIR SUPPLIED RESPIRATOR
Ventilation:GENERAL OR LOCAL EXHAUST
Protective Gloves:NEOPRENE
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:FOR RPTD/PRL SKIN CONTACT,WEAR IMPERVIOUS
    CLOTHING,BOOTS
Supplemental Safety and Health
MSDS PREP 86142,SPEC GRAV RANGE:0.928-0.945 @ 60F.CALLED MFR T GET FL
    PT METHOD,SOLUB,APP & ODOR,TLV.FOR INFO CALL 800-321-4477,X5402.

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:302F,150C
Vapor Pres:<1
Vapor Density:>1
Spec Gravity:SUPP
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIQUID,OIL ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CO,CO*2,OTHER TOXICS

====================  Disposal Considerations  ====================

Waste Disposal Methods:SMALL AMT:ALLOW VOLATILE PORTION TO EVAPORATE IN
    HOOD.DISPOSE OF REMAINS ACCORD TO APPLICABLE REGS LG AMT:DESTROY BY
    LIW INCINERATION.CONTAM ABSORBENT CAN BE TAKEN TO LANDFILL IN
    ACCORD W/ LOCAL,STATE ,FEDERAL REGS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***