=====================  Product Identification  =====================

MSDS NAME:BONDITE ADHESIVE RESIN (SEE SUPPLEMENTAL)
NIIN:01-272-2023
Kit Part:Y
MSDS Number: CCJDD
=== Responsible Party ===
Company:KERR CORPORATION
Address:1717 W. COLLINS
City:ORANGE
State:CA
ZIP:92667
Country:US
Info Phone Num:800-KERR-123
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:LO931
=== Contractor Identification ===
Company:KERR CORP
Address:1717 W COLLINS AVENUE
Box:City:ORANGE
State:CA
ZIP:92867-5422
Country:US
Phone:800-537-7187
CAGE:33339
Company:KERR CORPORATION
Address:1717 W COLLINS AVE
City:ORANGE
State:CA
ZIP:92667-5000
Phone:714-516-7400
CAGE:LO931

=============  Composition/Information on Ingredients  =============

Name:TRIETHYLENE GLYCOL DIMETHACRYLATE; (UNCURED METHACRYLATE
    ESTER MONOMERS)
CAS:109-16-0
RTECS #:OZ4100000
Fraction by Wt: 90-100%
Other REC Limits:NONE RECOMMENDED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE EYE IRRIT & DMG IF NOT
    REMOVE DPROMPTLY. PROLONGED/REP EXPO TO UNCURED MATL MAY CAUSE
    IRRIT OR SKIN RASH ESPECIALLY IN SENSITIVE INDIVIDUALS.
    PROLONGED/EXCESSIVE INHAL MAY CAUSE RESP TRACT I RRIT. UNCURED MATL
    MAY BE HARMFUL OR FATAL IF SWALLOWED.
Explanation of Carcinogenicity:PER
    MSDS:CARCINOGENCITY:NTP/IARC/OSHA:NO.
Effects of Overexposure:EYE IRRIT & DMG. SKIN IRRIT OR RASH.
    RESPIRATORY TRACT IRIT. UNCURED MATL HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/WATER FOR 15MINS INCLUDING UNDER EYELIDS.
    SKIN:WASH THOROUGHLY WITH SOAP/WATER. INHAL:REMOVE TO FRESH AIR.GET
    MED ATTN IF DISCOMFORT PERSISTS. INGEST:RINSE MOUTH OUT W/WATER.DO
    NOT INDUCE	VOMITING.SEEK MED ATTN.

=====================  Fire Fighting Measures  =====================

Flash Point:ND
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:ND
Upper Limits:ND
Extinguishing Media:CHEMICAL FOAM, COW, DRY CHEMICAL.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:HEAT CAN CAUSE POLYMERIZATION WITH RAPID
    RELEASE OF ENERGY.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ABSORP WPILLS W/INERT MATL. KEEP SPILLED MATL
    OUT OF SEWERS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL DRY PLACE AWAY FROM HEAT
    LIGHT & IGNITION SOURCES.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:AVOID PROLONGED OR EXCESSIVE BREATHING OF VAPORS
    OF UNCURED MATL.
Ventilation:LOCAL EXHAUS:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT
    TO COTNROL AIRBORNE LEVELS OF VAP RELEASED BY UNCURED MATL.
Protective Gloves:IMPERVIOUS RUBB GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NA.
Work Hygienic Practices:HANDLE IAW GOOD PERSONAL HYGIENE & SAFETY
    PRACTICES.THESE PRACTICES INCLUDE AVOIDING UNNECESSARY EXPOSURE.
Supplemental Safety and Health
5-PART KIT; SEE SAME NSN CAGE:KERRC PNIND:A,B, C & CAGE:33339 PNIND:A,
    FOR OTHER PARTS. KEY:HCC=N1.

==================  Physical/Chemical Properties  ==================

HCC:F6
Boiling Pt:B.P. Text:N/DETERMINE
Melt/Freeze Pt:M.P/F.P Text:N/DETERMINE
Decomp Temp:Decomp Text:NP
Vapor Pres:N/DETERMIN
Vapor Density:N/DETERMIN
Spec Gravity:>1.1
pH:NP
Viscosity:NP
Evaporation Rate & Reference:N/DETERMINED
Solubility in Water:INSOLUBLE.
Appearance and Odor:LIGHT YELLOW LIQUID WITH FRUITY ESTER-LIKE ODOR.
Percent Volatiles by Volume:NP
Corrosion Rate:NP

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
REDUCING & OXIDIZING AGETNS, PEROXIDES & AMINES.
Stability Condition to Avoid:HEAT, LIGHT, AGING & CONTAMINATION.
Hazardous Decomposition Products:OXIDES OF CARBON.
Conditions to Avoid Polymerization:HEAT, LIGHT, AGING & SOURCE OF
    CONTAMINATION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:UNPOLYMERIZED(UNCURED)MATL MAY BE RCRA HAZ
    WASTE. INCINERATE UNCURED MATL IAW ALL LOCAL, STATE AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***