=====================  Product Identification  =====================

MSDS NAME:MAGENTA DEVELOPER (HCM-S33D)
NIIN:00N075581
MSDS Number: CCVJS
=== Responsible Party ===
Company:QMS INC
Address:ONE MAGNUM PASS
City:MOBILE
State:AL
ZIP:36618
Country:US
Info Phone Num:334-633-4300
Emergency Phone Num:334-633-4300
CAGE:GO280
=== Contractor Identification ===
Company:HITACHI, LTD
Address:1-1, HIGASHITAGA-CHO 1-CHOME
Box:City:HITACHI-SHI,IBARAKI-KEN, 316
Country:JA
Phone:205-633-4300
CAGE:1BS40
Company:QMS INC
Address:1 MAGNUM PASS
Box:81250
City:MOBILE
State:AL
ZIP:36689-1250
Country:US
Phone:205-633-4300
CAGE:GO280

=============  Composition/Information on Ingredients  =============

Name:FERRITE POWDER (CONSISTING OF INGREDIENTS 2-7)
CAS:1317-60-8
RTECS #:MH7800000
Fraction by Wt: 95-98%
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:CUPRIC OXIDE
CAS:1317-38-0
RTECS #:GL7900000
OSHA PEL:1 MG CU/M3
ACGIH TLV:1 MG CU/M3

Name:ZINC OXIDE (SARA 313) (CERCLA)
CAS:1314-13-2
RTECS #:ZH4810000
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3 TDUST

Name:MAGNESIUM OXIDE
CAS:1309-48-4
RTECS #:OM3850000
OSHA PEL:15 MG/M3 PARTICULATE
ACGIH TLV:10 MG/M3; FUME

Name:IRON (III) OXIDE
CAS:1309-37-1
RTECS #:NO7400000
OSHA PEL:10 MG/M3 (FE)
ACGIH TLV:5MG(FE)/M3FUME

Name:CARBON BLACK
CAS:1333-86-4
RTECS #:FF5800000
OSHA PEL:3.5 MG/M3
ACGIH TLV:3.5 MG/M3

Name:SILANOL/STPD SILOXANE W/ME SILOXNS
CAS:68554-67-6
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:MAGENTA PIGMENT; (MAGENTA TONER)
Fraction by Wt: 5-2%
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:YES	 OSHA:NO
Health Hazards Acute and Chronic:ACUTE AND CHRONIC:NO DATA AVAILABLE.
    MINIMAL IRRITATION TO RESPIRATORY TRACT MAY OCCUR AS WITH EXPOSURE
    TO LARGE AMOUNT OF ANY NON-TOXIC POWDER.
Explanation of Carcinogenicity:CARBON BLACK:IARC MONOGRAPHS ON EVAL OF
    CARCIN RISK OF CHEMS TO MAN VOL 65, PG 24-27, 1995:GROUP 2B.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ACCUMULATION OF DUST IN THE
    RESPIRATORY SYSTEM.

=======================  First Aid Measures  =======================

First Aid:INGESTION:CALL MD IMMEDIATELY . SKIN:FLUSH W/COPIOUS AMOUNTS
    OF WATER. CALL MD . INHALATION:REMOVE TO FRESH AIR IF EFFECTS
    OCCUR, CONSULT LOCAL MEDICAL PERSONNEL. EYES:IN CASE OF CONTACT, 
    IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER SPRAY, FOAM, CO*2, DRY POWDER.
Fire Fighting Procedures:WEAR NIOSH APPRVD SCBA & FULL PROT EQUIP .
    THIS MATERIAL WILL BURN IN CASE OF FIRE. DECOMPOSITION PRODUCTS ARE
    CO, CO*2 AND NO*X. AVOID INHAL OF SMOKE.
Unusual Fire/Explosion Hazard:NONE IN NORMAL STORAGE AND USE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SWEEP UP OR CLEAN UP WITH A VACUUM CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS FOR
    SAFETY REASONS.
Other Precautions:NONE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
    SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:2732F,1500C
Spec Gravity:5 (H*2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:POWDER AND ODORLESS.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:WASTE MATERIAL MAY BE DUMPED OR INCINERATED
    UNDER CONDITIONS WHICH MEET ALL FEDERAL, STATE AND LOCAL
    ENVIRONMENTAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***