=====================  Product Identification  =====================

MSDS NAME:30402103,FIRE EXTINGUISHER (MONOBROMOTRIFLUOROMETHANE)
NIIN:00-168-5737
MSDS Number: CCVQY
=== Responsible Party ===
Company:ANNISTON ARMY DEPOT
Address:7 FRANKFORD AVENUE
City:ANNISTON
State:AL
ZIP:35201-4199
Country:US
Info Phone Num:205-235-7776
Emergency Phone Num:800-851-8061
Preparer's Name:HMIS-VBA
CAGE:75117
=== Contractor Identification ===
Company:ANNISTON ARMY DEPOT
Address:7 FRANKFORD AVENUE
Box:City:ANNISTON
State:AL
ZIP:35201-4199
Country:US
Phone:205-235-7776
CAGE:75117

=============  Composition/Information on Ingredients  =============

Name:BROMOTRIFLUOROMETHANE
CAS:75-63-8
Fraction by Wt: 3.0% LBS
Other REC Limits:NONE SPECIFIED
Ozone Depleting Chemical:1

Name:NITROGEN
CAS:7727-37-9
RTECS #:QW9700000
Fraction by Wt: 0.08% LB
Other REC Limits:NONE SPECIFIED
ACGIH TLV:ASPHYXIANT; 9495

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50 (RAT) IS UNKNOWN.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MAY ACT AS A SIMPLE ASPHYXIANT &
    IRRITANT TO LUNGS, APPROXIMATE LETHAL CONCENTRATION OF PRODUCT TO
    THE RAT IS 80% FOR 15 MINUTES EXPOSURE. PRODUCT HAS ANESTHETIC AND
    CARDIAC EFFECTS IN HUMANS AT CONCE NTRATIONS ABOVE 10% BY VOLUME.
    CONCENTRATIONS BELOW 10% ARE CONSIDERED SAFE FOR 0 TO 5 MINUTES
    EXPOSURES.
Effects of Overexposure:THE ANESTHETIC EFFECT OF THE PRODUCT AT LEVELS
    BELOW 10% IS SIMILAR TO A FEELING OF MILD INTOXICATION. ANESTHETIC
    EFFECTS END RAPIDLY AFTER EXPOSURE IS TERMINATED. PROLONGED
    EXPOSURE TO CONCENTRATIONS	ABOVE 10% (15-20%), MAY LEAD TO
    UNCONSCIOUSNESS AND POSSIBLY DEATH.
Medical Cond Aggravated by Exposure:CARDIAC PROBLEMS MAY BE AGGRAVATED
    BY OVEREXPOSURE.

=======================  First Aid Measures  =======================

First Aid:REMOVE VICTIM TO FRESH AIR. IF NOT BREATHING GIVE CPR/OXYGEN
    IF NECESSARY. PROVIDE SYMPTOMIC AND SUPPORTIVE CARE. GET MEDICAL
    ATTENTION. NOTE: ADRENALIN IS CONTRAINDICATED IN THE TREATMAENT OF
    OVEREXP OSURE.

=====================  Fire Fighting Measures  =====================

Flash Point:NON-FLAMMABLE
Extinguishing Media:PRODUCT IS A NON-FLAMMABLE GAS. ALL CONVENTIONAL
    EXTINGUISHING MEDIA ARE SUITABLE.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR PROTECTIVE CLOTHING
    AND SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CYLINDER MAY BURST IN FIRE. MAY RELEASE
    IRRITATING AND TOXIC PRODUCTS LIKE HYDROGEN FLUORIDE AND HYDROGEN
    BROMIDE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE PERSONNEL AND VENTILATE ENCLOSED
    AREAS IN CASE OF INADVERTENT DISCHARGE OF THE PRODUCT.
Neutralizing Agent:NONE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID PHYSICAL DAMAGE TO CONTAINER.
    STORE AT COOL AND WELL VENTILATED AREA BELOW 125 F.
Other Precautions:USE IN A WELL VENTILATED AREA.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH APPROVED SELF-CONTAINED BREATHING
    APPARATUS IF EXPOSED TO CONCENTRATIONS GREATER THAN 10%
Ventilation:ALL INDOOR AREAS SHOULD BE WELL VENTILATED.
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:NONE NORMALLY REQUIRED.
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:AVOID OVEREXPOSURE.
Supplemental Safety and Health
THE LOGISTICS INFORMATION IS FROM AVSOM DMWR 55-1680-246.

==================  Physical/Chemical Properties  ==================

HCC:G3
Boiling Pt:B.P. Text:-72F,-58C
Vapor Pres:6200 @ 0 C
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS, LIQUIFIED GAS WITH SLIGHT ETHEREAL ODOR.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
ACTIVE METALS, FIRES OF METAL HYDRIDES, AND MATERIAL CONTAINING OWN
    OXYGEN.
Stability Condition to Avoid:HIGH HEAT ABOVE 125F.
Hazardous Decomposition Products:IN PRESENCE OF FLAMES/HOT SURFACES;
    HYDROGEN FLUORIDE, HYDROGEN BROMIDE, BROMINE, CARBONYL FLUORIDE,
    CARBONYL BROMIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPERSES IN THE ATMOSPHERE. UNUSED MATERIAL MAY
    BE RETURNED TO THE MANUFCTURER.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***