=====================  Product Identification  =====================

MSDS NAME:TPO 754 3C BURNT UMBER/OIL TT-P-381E
NIIN:00-247-4341
MSDS Number: BDNMS
=== Responsible Party ===
Company:KALCOR COATINGS
Address:37721 STEVENS BLVD
City:WILLOUGHBY
State:OH
ZIP:44094-6231
Country:US
CAGE:DO396
=== Contractor Identification ===
Company:KALCOR COATING CO
Address:37721 STEVENS BLVD
Box:City:WILLOUGHBY
State:OH
ZIP:44094-6231
Country:US
Phone:216-946-4700
CAGE:33201
Company:KALCOR COATINGS COMPANY
Address:37721 STEVENS BLVD
City:WILLOUGHBY
State:OH
ZIP:44094
Phone:800-424-9300 CHEMTREC
CAGE:DO396

=============  Composition/Information on Ingredients  =============

Name:MINERAL SPIRITS
CAS:64742-88-7
Fraction by Wt: 5%
Other REC Limits:100 PPM,PEL 500 PPM
OSHA PEL:
ACGIH TLV:

=====================  Hazards Identification  =====================

Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Explanation of Carcinogenicity:N/A 
Effects of Overexposure:INHAL: ANESTHETIC.IRRITATION OF THE RESP TRACT
    OR ACUTE NERVOUS SYSTEM.DEPRESSION CHARACTERIZED BY
    HEADACH,DIZZINESS,STAGGERING,GAIT CONFUSION,UNCONSCIOUSNESS OR
    COMA.

=======================  First Aid Measures  =======================

First Aid:INHAL:FUMES,REMOVE FROM EXPOSURE.RESTORE BREATHING.KEEP WARM
    & QUIET NOTIFY PHYS.EYES:FLUSH IMMEDIATELY W/COPIOUS QTY OF RUNNING
    H*2O FOR AT LEAST 15 MINUTES.TAKE TO A PHYSICIAN FOR DEFINITIVE MED
    TRE ATMENT.SKIN:REMOVE W/SOAP & H*2O.REMOVECONTAMINTED CLOTHING.

=====================  Fire Fighting Measures  =====================

Flash Point:104
Lower Limits:1.0
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL,WATER FOG
Fire Fighting Procedures:USE FULL PROTECTIVE EQUIPMENT.INCLUDING SCBA.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM SOURCES OF IGNITION.CLOSED
    CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.APPLICATION TO
    HOT SURFACES REQUIRES SPECIAL PRECAUTIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION(FLAME,HOT
    SURFACES,& ELECTRICAL,STATIC TO FRICTIONAL SPARKS). AVOID BREATHING
    VAPORS.VENT AREA.REMOVE W/INERT ABSORENT & NON-SPRAKING-TOOLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 120F STORE LG QTY
    IN BUILDINGS  DESIGNED FOR STORAGE OF NFPA CLASS 2 FLAMMABLE
    LIQUIDS.
Other Precautions:DO NOT TAKE INTERNALLY.CONTAINERS SHOULD BE GROUNDED
    WHEN POURING.DO NOT FLAME CUT,BRAZE,OR WELD WITHOUT NIOSH APPROVED
    RESP OR APPROPRIATE VENT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:OUTDOOR/OPEN AREAS USE NIOSH APPROVED MECH
    FILTER RESP TO REMOVE SOLID AIR BORNE PARTICLES.RESTRICT.VENT USE
    NIOSH APPROVED CHEM MECA FILTER TO REMOVE PARTICULATE GAS &
    VAPOR.CONFINED AREAS NIOSH APPR OVED AIR LINE RESP OR HOODS
Ventilation:PROVIDE GEN DILUT/LOCAL EXHAUST VENT IN VOL & PATTERN TO
    KEEP TLV OF HAZ INGREDIENTS BELOW ACCEPTABLE LIMIT
Protective Gloves:REC
Eye Protection:SAFETY GLASSES OR GOGGLE
Other Protective Equipment:NONE
Supplemental Safety and Health
WT/GAL 13.0+/-.2 LBS/GAL. QUALIFIED MIL SPEC TT-P-381E.

==================  Physical/Chemical Properties  ==================

HCC:F4
NRC/State Lic Num:NA
Boiling Pt:B.P. Text:300-385 F
Vapor Density:HEAV > AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:14+/-1

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Hazardous Decomposition Products:WHEN HEATED TO DECOMPOSITION AS IN
    WELDING,WILL PRODUCE FUMES CONTAINING OXIDES OF CARBON

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW LOCAL,STATE & FED REGS.DO NOT
    INCINERATE CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***