=====================  Product Identification  =====================

MSDS NAME:TT-P-320,ALUMINUM PASTE,STANDARD
NIIN:00-247-4348
MSDS Number: BDNMX
=== Responsible Party ===
Company:UNITED STATES BRONZE POWDERS,INC.
Address:ROUTE 202
Box:31
City:FLEMINGTON
State:NJ
ZIP:08822-9122
Country:US
CAGE:78901
=== Contractor Identification ===
Company:UNITED STATES BRONZE POWDERS CO INC
Address:ROUTE 202
Box:31
City:FLEMINGTON
State:NJ
ZIP:08822-9122
Country:US
CAGE:78901

=============  Composition/Information on Ingredients  =============

Name:ALUMINUM  (SARA III)
CAS:7429-90-5
RTECS #:BD0330000
Fraction by Wt: 65%
OSHA PEL:15MG/M3 DUST/5 FUME
ACGIH TLV:10MG/M3 DUST; 9192

Name:NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS:8030-30-6
RTECS #:SE7555000
Fraction by Wt: 35%
OSHA PEL:100 PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:ANESTHETIC-HEADACHE, NAUSEA, UNCONSSCIOUSNESS

=======================  First Aid Measures  =======================

First Aid:INHALATION:IMMEDIATELY REMOVE TO FRESH AIR. CALLMD. GIVE
    ART.RESP. IF NECESSARY.SKIN:REMOVE CONTAMINATED CLOTHING.WASH
    THOROUGHLY W/PLENTY OF WATER. CALL MD IMMEDIATELY. EYE:IMMEDIATELY
    FLUSH W/WATER  FOR AT LEAST 15 MINS. CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point:104F TCC
Lower Limits:0.9
Upper Limits:6.0
Extinguishing Media:DRY POWDER, CO*2, FOAM
Fire Fighting Procedures:STANDARD FIRE FIGHTING EQUIPMENT
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:KEEP OUT OF SEWERS.DIKE SPILLAGE AREAS AS SOON
    AS POSSIBLE.UTILIZE SAND OR EARTH. SHUT OFF VALVES & PUMPS
    IMMEDIATELY

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, OPEN
    FLAMES AND WATER. KEEP CONTANERS CLOSED.USE ONLY W/ADEQUATE
    VENTILATION.USE NON-FERROUS TYPE TOOLS
Other Precautions:AVOID PROLONGED OR REPEATED BREATHING OF VAPORS AND
    CONTACT W/SKIN. PASTE DRUM LIDS SHOULD BE VENTED PRIOR TO OPENING

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED SELF-CONTAINED SYSTEM
    ORGANIC CANNISTER
Ventilation:ADEQUATE VENTILATION
Protective Gloves:NEOPRENE RUBBER
Eye Protection:SFTY GOGS W/SDE SHIELDS
Other Protective Equipment:FACE SHIELDS, APRONS, ARM GUARDS, PROTECTIVE
    CREAMS
Supplemental Safety and Health
SPECIFIC GRAVITY & BOILING PT ARE GIVEN FOR SOLVENT.MFG SUGGESTS TLV OF
    500 PPM BASED ON SOLVENT.PROD MEETS TT-P-320C,TY 2,CLB

==================  Physical/Chemical Properties  ==================

HCC:F4
Boiling Pt:B.P. Text:307F
Vapor Density:4.70
Spec Gravity:0.794
Evaporation Rate & Reference:0.06 TOLVENE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PASTE, METALLIC WHITE

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES

====================  Disposal Considerations  ====================

Waste Disposal Methods:MFG SUGGESTS SATURATED SAND OR EARTH MAY BE
    POURED ON DRY SAND, EARTH, OR ASHES AT A SAFE DISTANCE FROM
    OCCUPIED AREAS & ALLOWED TO EVAPORATE. DISPOSE IN ACCORDANCE
    W/LOCAL, STATE & FED, CODES

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***