=====================  Product Identification  =====================

MSDS NAME:TETRA-N-BUTYLAMMONIUM AZIDE, T0920
NIIN:00N075699
MSDS Number: CCWVC
=== Responsible Party ===
Company:TCI AMERICA
Address:9211 N HARBORGATE ST
City:PORTLAND
State:OR
ZIP:97203
Country:US
Info Phone Num:800-423-8616
Emergency Phone Num:800-424-9300(CHEMTREC)
CAGE:041D5
=== Contractor Identification ===
Company:TCI AMERICA
Address:9211 N HARBORGATE ST
Box:City:PORTLAND
State:OR
ZIP:97203
Country:US
Phone:800-423-8616
CAGE:041D5

=============  Composition/Information on Ingredients  =============

Name:AZIDE COMPOUNDS; (TETRA-N-BUTYLAMMONIUM AZIDE)
CAS:993-22-6
OSHA PEL:N/K 
ACGIH TLV:N/K 

Name:SUPDAT:W/AN EMOLLIENT. IF IRRIT PERSISTS, SEEK MED ATTN.
    WASH CONTAM CLTHG BEFORE REUSING. INHAL:EVACUATE VICTIM (ING 3)
RTECS #:9999999ZZ

Name:ING 2:TO SAFE AREA AS SOON AS POSS. LOOSEN TIGHT CLTHG SUCH
    AS COLLAR, TIE, BELT/WAISTBAND. IF BRTHG IS (ING 4)
RTECS #:9999999ZZ

Name:ING 3:DFCLT, ADMIN OXYG. IF VICTIM IS NOT BRTHG, PERFORM
    MOUTH-TO-MOUTH RESUSCITATION. SEEK MED ATTN. INGEST: (ING 5)
RTECS #:9999999ZZ

Name:ING 4:REMOVE DENTURES IF ANY. WATCH FOR AN OBSTRUCTION IN
    VICTIM'S MOUTH. REMOVE IF POSS WHAT IS CAUSING THE (ING 6)
RTECS #:9999999ZZ

Name:ING 5:OBSTRUCTION BUT DO NOT FORCE FINGERS/HARD OBJECT
    BETWEEN VICTIM'S TEETH. HAVE CONSCIOUS PERSON DRINK (ING 7)
RTECS #:9999999ZZ

Name:ING 6:SEVERAL GLASSES OF WATER/MILK. INDUCE VOMIT BY
    STICKING FINGER IN THROAT. SEEK IMMED MED ATTN.
RTECS #:9999999ZZ

Name:EYE PROT:AND FULL LENGTH FACE SHIELD .
RTECS #:9999999ZZ

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:VERY DANGEROUS IN CASE OF SKIN &
    EYE CONT (IRRIT), INGEST & INHAL. PROD MAY IRRIT EYES & SKIN UPON
    CONT. INFLAM OF EYE IS CHARACT BY REDNESS, WATERING & ITCHING. SKIN
    INFLAM IS CHARACT BY ITCHIN G, SCALING, REDDENING/OCCAS,
    BLISTERING. CHRONIC:THERE IS NO KNOWN EFT FROM EXPOS. CHRONIC TOX
    EFTS: (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZS:THERE IS NO KNOWN EFT FROM CHRONIC
    EXPOS TO PROD. ACUTE TOX EFTS:VERY DANGEROUS IN CASE OF SKIN & EYE
    CONT (IRRIT), INGEST & INHAL.
Medical Cond Aggravated by Exposure:REPEATED OR PROLONGED EXPOSURE TO
    THIS COMPOUND IS NOT KNOWN TO AGGRAVATE EXISTING MEDICAL
    CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:EYE:CHECK FOR & REMOVE ANY CONT LENSES. DO NOT USE EYE
    OINTMENT. FLUSH W/PLENTY OF WATER FOR @ LST 15 MIN, OCCAS LIFTING
    LIDS. SKIN:IF CHEM GOT ONTO CLOTHED PORTION OF BODY, REMOVE CONTAM
    CLOTHES AS Q UICKLY AS POSS, PROTECTING YOUR OWN HANDS & BODY.
    PLACE VICTIM UNDER DELUGE SHOWER. IF CHEM TOUCHES VICTIM'S EXPOSED
    SKIN, SUCH AS HANDS:GENTLY & THORO WASH CONTAM SKIN W/RUNNING WATER
    & NON-(SUPDAT)

=====================  Fire Fighting Measures  =====================

Flash Point:NOT AVAILABLE
Extinguishing Media:FLAMMABLE SOLID. SMALL FIRE:USE DRY CHEMICALS,
    CO*2, WATER SPRAY OR FOAM. LARGE FIRE:USE WATER SPRAY OR FOG.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT . COOL CONTAINING VESSELS WITH WATER JET IN ORDER TO
    PREVENT PRESSURE BUILD-UP, AUTOIGNITION/EXPLO.
Unusual Fire/Explosion Hazard:EXTREMELY FLAM IN PRESENCE OF OPEN FLAMES
    & SPARKS OF HEAT. COMBUST PRODS:THESE PRODS ARE CARBON OXIDES (CO,
    CO*2), NITROGEN OXIDES (NO, NO*2).

==================  Accidental Release Measures  ==================

Spill Release Procedures:FLAMMABLE SOLID. STOP LEAK IF WITHOUT RISK. DO
    NOT TOUCH SPILLED MATERIAL. USE WATER SPRAY CURTAIN TO DIVERT VAPOR
    DRIFT. PREVENT ENTRY INTO SEWERS, BASEMENTS OR CONFINED AREAS; DIKE
    IF NEEDED. ELIM A LL IGNIT SOURCES. CALL FOR ASSISTANCE ON DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:HIGHLY REACTIVE. READILY DECOMPOSES.
    ONCE DECOMPOSED, PRESS INSIDE BOTTLE MAY BE HIGHER THAN ATM PRESS.
    REFRIGERATE BEFORE OPENING.
Other Precautions:OPEN ONLY WHEN USING PROT FSHLD/BLAST SHIELD. TWIST
    CAP SLOWLY TO ALLOW PRESS TO VENT. KEEP AWAY FROM HEAT & IGNIT
    SOURCES. GROUND ALL EQUIP CNTNING MATL. DO NOT INGEST/BRTHE DUST.
    IF INGESTED, SEEK M ED ADVICE IMMED & SHOW CNTNR (SUPP DATA)

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IN CASE OF INSUFFICIENT VENTILATION, WEAR
    SUITABLE NIOSH APPROVED RESPIRATORY EQUIPMENT. NIOSH APPROVED DUST
    RESPIRATOR. A NIOSH APPROVED SCBA SHOULD BE USED TO AVOID
    INHALATION OF THE PRODUCT.
Ventilation:USE PROCESS ENCLOSURES; LOC EXHST VENT/OTHER ENGINEERING
    CTLS TO KEEP AIRBORNE LEVELS BELOW RELS. IF USER (SUPP DATA)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS (ING 8)
Other Protective Equipment:ANSI APPRVD EMER EYEWASH & DELUGE SHOWER .
    BOOTS. SUGGESTED PROT CLTHG MIGHT NOT BE SUFFICIENT, CONSULT (SUP
    DAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PRECS:OR LABEL. AVOID CONT W/SKIN & EYES. VENT:OPERATIONS
    GENERATE DUST, FUMES/MIST, USE VENT TO KEEP EXPOS TO AIRBORNE
    CONTAMS BELOW EXPOS LIM. OTHER PROT EQUIP:A SPECIALIST BEFORE HNDLG
    PROD.  FIRST AID PROC:ABRASIVE SOAP. BE PARTICULARLY CAREFUL TO
    CLEAN FOLDS, CREVICES, CREASES & GROIN. COVER IRRIT SKIN(ING 2)

==================  Physical/Chemical Properties  ==================

Appearance and Odor:SOLID WHITE CRYSTALLINE POWDER.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NO SPECIFIC INFORMATION IS AVAILABLE REGARDING THE REACTIVITY OF THIS
    MATERIAL IN THE PRESENCE OF VARIOUS OTHER MATLS.
Stability Condition to Avoid:NO ADDITIONAL REMARK.
Hazardous Decomposition Products:CORR:NO SPECIFIC INFO IS AVAIL IN
    MFR'S DATABASE REGARDING CORR OF THIS PROD IN PRESENCE OF VARIOUS
    MATLS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:RECYCLE TO PROCESS, IF POSS. CONSULT YOUR
    LOC/REGIONAL AUTHS. YOU MAY BE ABLE TO DISSOLVE/MIX MATL W/COMBUST
    SOLV & BURN IN CHEM INCIN EQUIPPED W/AFTERBURNER & SCRUBBER SYS.
    OBSERVE ALL FED, STATE & L OC REGS WHEN DISPOSING OF THIS
    SUBSTANCE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***