===================== Product Identification =====================
MSDS NAME:AMCO 2213 SOLDERING FLUX
NIIN:00-255-4568
MSDS Number: BDPDC
=== Responsible Party ===
Company:AMERICAN SOLDER AND FLUX CO INC FORCE CHEMICAL DIV
Address:INDUSTRIAL BLVD
City:PAOLI
State:PA
ZIP:19301
Country:US
Info Phone Num:215-647-3575
Emergency Phone Num:215-647-3575
CAGE:70540
=== Contractor Identification ===
Company:AMERICAN SOLDER AND FLUX CO INC FORCE CHEMICAL DIV
Address:28 INDUSTRIAL BLVD
Box:City:PAOLI
State:PA
ZIP:19301
Country:US
Phone:800-424-9300
CAGE:70540
Company:INWELD MFG CORP
Address:3962 PORTLAND ST
Box:40
City:COPLAY
State:PA
ZIP:18037-0040
Country:US
Phone:610-261-1900
CAGE:66376
============= Composition/Information on Ingredients =============
Name:TRIETHANOLAMINE
CAS:102-71-6
RTECS #:KL9275000
Other REC Limits:NONE SPECIFIED
Name:AMINOETHYLETHANOLAMINE
CAS:111-41-1
RTECS #:KJ6300000
Other REC Limits:NONE SPECIFIED
Name:AMMONIUM FLUOBORATE (SARA III)
CAS:13826-83-0
RTECS #:BQ6100000
Other REC Limits:NONE SPECIFIED
OSHA PEL:2.5 MG F/M3
ACGIH TLV:2.5 MG F/M3; 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:ZINC OXIDE
CAS:1314-13-2
RTECS #:ZH4810000
Fraction by Wt: <10.0%
Other REC Limits:NONE SPECIFIED
OSHA PEL:15MG/M3 TDUST/5 FUME
ACGIH TLV:10MG/M3 TDUST; 9293
Name:TIN
CAS:7440-31-5
RTECS #:XP7320000
Fraction by Wt: <5.0%
Other REC Limits:NONE SPECIFIED
OSHA PEL:2 MG/M3
ACGIH TLV:2 MG/M3; 9192
Name:ZINC (SARA III)
CAS:7440-66-6
RTECS #:ZG8600000
Fraction by Wt: <5.0%
Other REC Limits:NONE SPECIFIED
OSHA PEL:10 MG ZNO/M3
ACGIH TLV:10 MG ZNO/M3; 9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS
Name:BORON OXIDE
CAS:1303-86-2
RTECS #:ED7900000
Other REC Limits:NONE SPECIFIED
OSHA PEL:15 MG/M3 TDUST
ACGIH TLV:10 MG/M3; 9293
===================== Hazards Identification =====================
LD50 LC50 Mixture:TLV MIXTURE 12.83 MG/M3. LD50 UNKNOWN.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HEALTH HAZARDS: ACUTE: CONTACT MAY
LEAD TO EYE AND SKIN IRRITATION AND BURNS,DERMATITIS. INHALATION
MAY LEAD TO IRRITATION TO RESPIRATORY SYSTEM AND LUNG DAMAGE.
SEVERE DAMAGE TO DIGESTIVE SYSTEM,SHOC K,VASOMOTOR DEPRESSION,AND
POISONING. CHRONIC: CNS EFFECTS,ERYTHEMA,NAUSEA.
Explanation of Carcinogenicity:NONE OF THE INGREDIENTS IN THIS PRODUCT
IS LISTED BY NTP, IARC OR OSHA AS A CARCINOGEN.
Effects of Overexposure:EYES/SKIN: IRRITATION, BURNS. INHALATION:
RESPIRATORY TRACT IRRITATION. INGESTION: IRRITATION, SHOCK.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN AND LUNG DISORDERS
WILL BE AGGRAVATED.
======================= First Aid Measures =======================
Eyes:FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.IF
IRRITATION PERSISTS,SEE DOCTOR. SKIN:WASH WITH MILD SOAP AND WATER
WHILE REMOVING CONTAMINATED CLOTHING AND SHOES. INHALATION:REMOVE
VICTIM T O FRESH AIR.GIVE OXYGEN/CPR IF NEEDED.SEE DOCTOR.
INGESTION:DO NOT INDUCE VOMIT.SEE DOCTOR IMMEDIATELY.
===================== Fire Fighting Measures =====================
Flash Point Method:TCC
Flash Point:275F,135C
Lower Limits:1.6
Upper Limits:10.0
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY. CONTAIN RUNOFF.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS NITROGEN OXIDES FUMES.
================== Accidental Release Measures ==================
Spill Release Procedures:REMOVE PERSONNEL.ELIMINATE IGNITION
SOURCES.VENTILATE AREA.WEAR PROTECTIVE CLOTHING AND
EQUIPMENT.ABSORB IN INERT MATERIAL AND PLACE IN APPROPIATE DISPOSAL
CONTAINER AND COVER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN COOL, DRY, WELL VENTILATED
AREA. PROTECT FROM PHYSICAL DAMAGE, HEAT, IGNITION SOURCES AND
INCOMPATIBLE MATERIALS. KEEP CONTAINERS CLOSED.
Other Precautions:AVOID EYE AND SKIN CONTACT. DO NOT BREATHE FUMES OR
VAPORS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NONE NORMALLY REQUIRED. NIOSH/MSHA-APPROVED
RESPIRATOR OR SCBA AS APPROPIATE FOR EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST VENTILATION TO KEEP EXPOSURE LEVELS BELOW
PEL.
Protective Gloves:WELDER'S GLOVES.
Eye Protection:CHEMICAL SAFETY GOGGLES.
Other Protective Equipment:FULL PROTECTIVE EQUIPMENT USED IN SOLDERING
OPERATIONS SO AS TO PREVENT ANY CONTACT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
CHRONIC FLUORIDE ABSORPTION CAN RESULT IN OSSEOUS FLUOROSIS, INCREASED
DENSITY OF THE BONES AND MOTTLING OF TEETH.
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:1.30
Solubility in Water:COMPLETE
Appearance and Odor:VISCOUS AMBER LIQUID WITH STRONG AMMONIA ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
CYANIDES, SULFIDES, STRONG OXIDANTS.
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES.
Hazardous Decomposition Products:AMMONIA, HYDROGEN FLUORIDE AND BORON
TRIFLUORIDE GASES.
==================== Disposal Considerations ====================
Waste Disposal Methods:CONTACT YOUR LOCAL ENVIRONMENTAL OFFICER.
DISPOSE OF IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|