===================== Product Identification =====================
MSDS NAME:LOCK BOND R-35, PART B
NIIN:01-043-3196
MSDS Number: BBKJN
=== Responsible Party ===
Company:INDUSTRIAL RUBBER CEMENT COMPANY
Address:15257 EAST PROCTOR AVENUE
City:INDUSTRY
State:CA
ZIP:91745
Info Phone Num:(919) 919-8270
Emergency Phone Num:(213) 333-4578
CAGE:55913
=== Contractor Identification ===
Company:INDUSTRIAL RUBBER CEMENT CO
Address:15257 E PROCTOR AVE
Box:City:CITY OF INDUSTRY
State:CA
ZIP:91745-1019
Country:US
CAGE:55913
============= Composition/Information on Ingredients =============
Name:EPOXY RESIN
Other REC Limits:10 MG/CUM (DUST)
===================== Hazards Identification =====================
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION & SENSIVITY. TIVITY.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION & SENSITIVITY.
======================= First Aid Measures =======================
First Aid:IN CASE OF CONTACT WITH EYES OR SKIN, IMMEDIATELY FLUSH WITH
WATER FOR 15 MINUTES. IN CASE OF EYE CONTACT, GET MEDICAL
ATTENTION. IF MATERIAL HARDENS ON THE SKIN, ALCOHOL IS REQUIRED TO
REMOVE IT.
===================== Fire Fighting Measures =====================
Flash Point Method:TOC
Flash Point:400F
Extinguishing Media:CO2, DRY CHEMICAL
====================== Handling and Storage ======================
Handling and Storage Precautions:SOME EPOXY SYSTEMS CAN IRRITATE &
SENSITIZE THE SKIN. AVOID PROLONGED OR REPEATED CONTACT WITHHE
SKIN. USE ADEQUATE VENTILATION.
============= Exposure Controls/Personal Protection =============
Ventilation:LOCAL EXHAUST: ADEQUATE.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Spec Gravity:10.87
Appearance and Odor:CLEAR VISCOUS, STRAW COLORED. BOTH ARE LIQUIDS.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:UNIT PART A AND B ARE MIXED.
Conditions to Avoid Polymerization:WHEN PART A & B ARE MIXED TOGETHER
AN EXOTHERM IS GENERATED.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD ***