=====================  Product Identification  =====================

MSDS NAME:DAR8378 DELSTAR ACRYLIC ENAMEL
NIIN:00F053324
MSDS Number: CDRCV
=== Responsible Party ===
Company:PPG INDUSTRIES INC COATINGS & RESINS GROUP
Address:4325 ROSANNA DR
Box:9
City:ALLISON PARK
State:PA
ZIP:15101-5000
Country:US
Info Phone Num:412-492-5555
Emergency Phone Num:304-843-1300
CAGE:DO542
=== Contractor Identification ===
Company:PPG INDUSTRIES INC. COATINGS & RESINS GP
Address:4325 ROSEANNA DR PO BOX 9
Box:9
City:ALLISON PARK
State:PA
ZIP:15101
Phone:412-492-5555
CAGE:DO542

=============  Composition/Information on Ingredients  =============

Name:TITANIUM DIOXIDE, TITANIUM OXIDE  (SUSPECTED ANIMAL
    CARCINOGEN, IARC GROUP 3)	*96-4*
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 10-15%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM (DUST)

Name:XYLENE, DIMETHYLBENZENE, XYLOL     (IARC - GROUP 3)  *96-4*
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 45-50%
Other REC Limits:100 PPM
OSHA PEL:100 PPM
ACGIH TLV:100 PPM, SKIN
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Name:FILM FORMERS, RESINS, AND ADDITIVES
Fraction by Wt: 35-40%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INGESTION: FATAL/HARMFUL. EYES/SKIN:
    IRRITATION. INHALATION: HARMFUL. IRRITATION TO EYES, NOSE & THROAT,
    RESPIRATORY SYSTEM. PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE.
    INTENTIONAL MISUSE BY DELIBERATELY	CONCENTRATING & INHALING THE
    CONTENTS CAN BE HARMFUL/FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, EYE WATERING, HEADACHES, NAUSEA,
    DIZZINESS, LOSS OF COORDINATION, REDNESS, ITCHING, CRACKING,
    BURNING, VISUAL DISTURBANCES, DRYNESS, SWELLING.

=======================  First Aid Measures  =======================

First Aid:INGESTION: DON'T INDUCE VOMITING. EYES: FLUSH W/WATER FOR 15
    MINS. SKIN: FLUSH W/WATER, FOLLOWED BY WATERLESS HAND CLEANER &
    SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE CPR IF NEEDED.
    OBTAIN M EDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:81F
Lower Limits:1.1
Extinguishing Media:CO2, DRY CHEMICAL/UNIVERSAL AQUEOUS FILM FORMING
    FOAM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY
    MAY BE USED TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG
    NOZZLES ARE PREFERRABLE. WEAR SCBA.
Unusual Fire/Explosion Hazard:WHEN PRODUCT IS USED, OVERSPRAY MAY BE
    SUBJECT TO SPONTANEOUS COMBUSTION. KEEP CONTAINERS TIGHTLY CLOSED.
    ISOLATE FROM IGNITION SOURCES. (SEE SUPP)

==================  Accidental Release Measures  ==================

Spill Release Procedures:USE MAXIMUM VENTILATION. ONLY PERSONNEL
    EQUIPPED W/RESPIRATORY, SKIN & EYE PROTECTION, MAY BE PERMITTED.
    REMOVE IGNITION SOURCES. TAKE UP W/SAND & OTHER NONCOMBUSTIBLE
    ABSORBANT MATERIALS. PLACE IN CL EAN, EMPTY CONTAINERS FOR DISPOSAL
    (SEESUPP)

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE >120F. CONTAINERS SHOULD
    BE GROUNDED BEFORE POURING. AVOID FREE FALL OF LIQUIDS IN EXCESS OF
    A FEW INCHES.
Other Precautions:IF MATERIAL IS PART OF A MULTIPLE COMPONENT SYSTEM,
    READ MATERIAL SAFETY DATA SHEET FOR OTHER COMPONENTS BEFORE
    BLENDING AS THE RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL OF
    ITS PARTS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH/MSHA APPROVED AIR PURIFYING/AIR
    SUPPLIED RESPIRATORS.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST VENTILATION.
Protective Gloves:NITRILE/NEOPRENE RUBBER
Eye Protection:CHEMICAL-TYPE SPLASH GOGGLES.
Other Protective Equipment:IMPERMEABLE APRON.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE. DISCARD CONTAMINATED CLOTHING, SHOES/GLOVES.
Supplemental Safety and Health
UNUSUAL FIRE CONT'D: CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO
    EXTREME HEAT. DON'T APPLY TO HOT SURFACES. TOXIC GASES MAY FORM
    WHEN PRODUCT IS CONTACTED BY FLAME/HOT SURFACES. SPILLS CONT'D:
    ONLY  THE SPILLED MATERIAL & THE ABSORBENT SHOULD BE PLACED IN THIS
    CONTAINER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:172.4-399 F
Vapor Pres:4.8
Vapor Density:>1
Spec Gravity:1.07
Evaporation Rate & Reference:(BU O AC=100): 62
Solubility in Water:0.0
Appearance and Odor:VISCOUS LIQUID W/CHARACTERISTIC ODOR OF THE
    SOLVENTS.
Percent Volatiles by Volume:58.2

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, ELECTRICAL EQUIPMENT, SPARKS, OPEN
    FLAMES, HOT SURFACES.
Hazardous Decomposition Products:HEAT, WELDING: CO, ACRYLONITRILE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
    REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
    THROUGH AN APPROVED WASTE MANAGEMENT FACILITY.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.

*** END OF RECORD ***