934000 PRIME & BOND BONDING AGENT ADHESIVE MATERIAL
CAS  
:
67-64-1
NAME  
:
acetone; dimethyl ketone; 2-propanone *96-4* acrylic monomer and elastomer
===================== Product Identification =====================
MSDS NAME:934000 PRIME & BOND BONDING AGENT ADHESIVE MATERIAL
NIIN:00F053069
MSDS Number: CDQZT
=== Responsible Party ===
Company:CAULK/DENTSPLY
Address:LAKEVIEW AND CLARKE AVE
Box:359
City:MILFORD
State:DE
ZIP:19963-0359
Country:US
Info Phone Num:302-422-4511
Emergency Phone Num:302-422-4511
CAGE:11107
=== Contractor Identification ===
Company:CAULK/DENTSPLY
Address:38 W CLARKE AVE
Box:359
City:MILFORD
State:DE
ZIP:19963-0359
Country:US
Phone:302-422-4511/ 703-451-1900
CAGE:11107
============= Composition/Information on Ingredients =============
Name:ACETONE; DIMETHYL KETONE; 2-PROPANONE *96-4*
CAS:67-64-1
RTECS #:AL3150000
OSHA PEL:2400 MG/CUM
ACGIH TLV:750 PPM
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS
Name:ACRYLIC MONOMER AND ELASTOMER
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION & POSSIBLE CORNEAL
DAMAGE. SKIN: IRRITATION/POSSIBLE ALLERGIC REACTION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, ALLERGIC REACTION, NAUSEA.
Medical Cond Aggravated by Exposure:OPEN SORES/WOUNDS ON SKIN, KNOWN
SENSITIVITY TO ACRYLICS.
======================= First Aid Measures =======================
Eyes: FLUSH W/WATER FOR 15 MINS. SKIN: WASH AFFECTED AREA
W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point:-2.2F
Lower Limits:2.5
Upper Limits:13
Extinguishing Media:CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR A NIOSH/MSHA APPROVED PRESSURE DEMAND
SCBA/EQUIVALENT.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM FIRE.
================== Accidental Release Measures ==================
Spill Release Procedures:ABSORB W/INERT MATERIALS SUCH AS
VERMICULITE/DRY SAND THEN PLACE IN AN APPROPRIATE CONTAINER FOR
DISPOSAL.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID PROLONGED EXPOSURE >100F. STORE
AWAY FROM OXIDIZING AGENTS SUCH AS PEROXIDES. STORE AWAY FROM FOOD.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:WEAR SCBA DURING HIGH VAPOR CONCENTRATIONS.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL VENTILATION USING
EXPLOSION-PROOF MOTORS IS ACCEPTABLE.
Protective Gloves:LATEX/RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:EYE WASH, SAFETY SHOWER
Work Hygienic Practices:OBSERVE NORMAL CARE WHEN WORKING WITH
CHEMICALS.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Boiling Pt:B.P. Text:131F
Vapor Pres:233
Spec Gravity:0.84
Solubility in Water:COMPLETE
Appearance and Odor:LIGHT YELLOW LIQUID W/ACETONE ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:PROLONGED HEATING AT ELEVATED TEMPS.
Hazardous Decomposition Products:ACRYLIC MONOMERS.
Conditions to Avoid Polymerization:LIGHT & TEMP.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD ***