===================== Product Identification =====================
MSDS NAME:SEALITE OPAQUE RESIN
NIIN:00F054193
MSDS Number: CFGRQ
=== Responsible Party ===
Company:KERR CORP
Address:1717 W COLLINS ST
City:ORANGE
State:CA
ZIP:92667-5000
Country:US
Info Phone Num:800-537-7123
Emergency Phone Num:800-537-7123
CAGE:GO317
=== Contractor Identification ===
Company:KERR CORP
Address:1717 W COLLINS AVENUE
Box:City:ORANGE
State:CA
ZIP:92867-5422
Country:US
Phone:800-537-7187
CAGE:33339
Company:KERR CORP
Address:1717 W COLLINS ST
City:ORANGE
State:CA
ZIP:92667-5000
Country:US
Phone:800-537-7123
CAGE:GO317
============= Composition/Information on Ingredients =============
Name:TRIETHYLENE GLYCOL DIMETHACRYLATE
CAS:109-16-0
RTECS #:OZ4100000
Fraction by Wt: 90-100%
Name:ALKYL DIMETHACRYLATES
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE IRRITATION & DAMAGE.
SKIN: PROLONGED/REPEATED EXPOSURE TO UNCURED MATERIAL MAY CAUSE
IRRITATION. INHALATION: MAY CAUSE RESPIRATORY TRACT IRRITATION.
INGESTION: UNCURED MATERIAL MAY BE HARMFUL/FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, RASH.
======================= First Aid Measures =======================
Eyes: FLUSH W/WATER FOR 15 MINS. SKIN: WASH THOROUGHLY W/SOAP
& WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: RINSE MOUTH
OUT W/WATER. DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL
CASES .
===================== Fire Fighting Measures =====================
Extinguishing Media:CHEMICAL FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR A SCBA.
Unusual Fire/Explosion Hazard:HEAT CAN CAUSE POLYMERIZATION W/RAPID
RELEASE OF ENERGY.
================== Accidental Release Measures ==================
Spill Release Procedures:ABSORB W/INERT MATERIAL. KEEP MATERIAL OUT OF
SEWERS.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE AWAY FROM
HEAT, LIGHT & IGNITION SOURCES. AVOID PROLONGED/EXCESSIVE BREATHING
OF VAPORS OF UNCURED MATERIAL.
============= Exposure Controls/Personal Protection =============
Ventilation:GOOD GENERAL SHOULD BE SUFFICIENT TO CONTROL AIRBORNE
LEVELS OF VAPORS RELEASED BY UNCURED MATERIAL.
Protective Gloves:IMPERVIOUS RUBBER
Eye Protection:SAFETY GLASSES
Work Hygienic Practices:HANDLE IAW/GOOD PERSONAL HYGIENE & SAFETY
PRACTICES.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Spec Gravity:1.1
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE LIQUID W/FRUITY ESTER-LIKE ODOR.
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
REDUCING & OXIDIZING AGENTS, PEROXIDES & AMINES.
Stability Condition to Avoid:HEAT, LIGHT, AGING & CONTAMINATION.
Hazardous Decomposition Products:OXIDES OF CARBON.
Conditions to Avoid Polymerization:HEAT, LIGHT, AGING & SOURCES OF
CONTAMINATION.
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE UNCURED MATERIAL IAW/FEDERAL, STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
*** END OF RECORD *** |
|